Question about Sony BRAVIA KDL-46S2000 46 in. LCD HDTV

Open Question

Digihome 2125RF won't turn on

When turn it on, it just responds by flickering the standby switch and then goes off.

Posted by on

2 Suggested Answers

  • 1779 Answers

SOURCE: tv wont turn on

Power supply problem!!!!!

Posted on Jul 01, 2009


  • 321 Answers

SOURCE: my digihome 37" turn itself of and havent been

sometime remote emeting by its own because the button stay on contact inside ,removed the battery
and try turn the tv set on and off if its works thats
the problem;open the remote and clean it up with alchool and a thoot brush to removed all grease
on the sheet rubber and the pcboard circuit..
if not its probly a capacitor in the protection circuit power or a regulator for
power...
hope that will help
regards allan

Posted on Oct 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a digihome led tv/dvd and it will not respond to the remote the red led just pulses 5 times and pauses then repeats constantly any ideas on the cause as tv is only 20 months old


Sounds like main board fault. These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/

Nov 22, 2015 | Digihome LCD TV

2 Answers

Can I leave my digihome tv plugged in during the day but not leave the tv on standby


Unless the TV has a proper on/off switch, when it's plugged in it's either in 'standby' or it's 'on' - those are your two choices!
Contrary to what we're being duped into believing, the energy consumption in standby is almost nothing, and you CERTAINLY won't see the difference in your leccy bills.

Nov 11, 2014 | Digihome LCD TV

1 Answer

Digihome TV d19906cu turning TV on and off .. Can you only leave it on stand by ?


Most likely standby is as powered down as it will get. There is some power used by TV sets when they are off, to maintain settings and channel memory, but this is very little power. You could put it on a power strip with a switch and turn off the power when you are not using it, but it's likely you will have to set it back up and scan the channels each time you turn it on.

Jul 14, 2014 | Televison & Video

1 Answer

Emerson lc370em2 will not turn on just flickers


Hello Mike, seems you have a problem with your power-supply board....*or check if the tv switched back into standby mode..if tv switched back to stanby mode .....please check your A/V <Main proccessing Board...
Hoping to inform you correctly I remain,
Yours friendly.

Blessings.


Gladmar.

Mar 15, 2014 | Emerson Televison & Video

1 Answer

I have a 22" digihome LCD TV with built in DVD. At 3am every morning the DVD activates and buzzes away. The screen doesn't come on but there is a loud click as the speakers activate. How can I stop this...


3am is the freeview box update time it will do this every day at 3am the loud click you hear you should not hear it but it may be the update switch that turns the tv out of standby for the freeview to be updated its a different switch that turn this on and may be sticking.

Oct 02, 2013 | Digihome LCD TV

1 Answer

Television is on standby-red light is flickering but the set will not turn on


The power supply needs to be repaired or replace the Module.

Nov 01, 2012 | Televison & Video

2 Answers

My 40' vivo tv has turned off and won't turn back on but the red stand by light is on??


If the standby light is on and it does not respond, it is most likely to be a problem with the power supply . First try this, unplug and leave the set like that for a few hours. Then plug it back in to see if the tv attempts to turn on when you try to power it up. See if you hear a "click" even if it goes back to standby. Let me know what you found so that I can help you test the power supply board to confirm, if necessary.

Aug 18, 2011 | Televison & Video

1 Answer

Tv wont turn on


Power supply problem!!!!!

Jul 01, 2009 | Televison & Video

1 Answer

When switching the tv on onlypower/standby red light comes on not


How many blinks when its red ?
The blinking is a code from the microprocessor telling why it's not turning on.

Apr 12, 2009 | Sony Grand WEGA KF50WE610 50" Rear...

Not finding what you are looking for?
Sony BRAVIA  KDL-46S2000 46 in. LCD HDTV Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

72620 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...