Question about GE Tritonr XL GSD6260JCC Dishwasher

1 Answer

GE Triton Motor comes on but no water comes out

I had just gotten it to drain water that was remaining in the bottom after each wash and dishes weren't getting clean. So I put soap in and ran a cycle w/ the heat dry aplication on. The soap didn't all come out of the tray and was dry and hardend and the dishes weren't clean. I tried to run it w no dishes and the motor goes on but no water comes out so I turn it off. Any recommendations?
Thanks!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 338 Answers

Clean out the filter in the floor in the back.

Posted on Jan 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Machine won't pump out last water after cycle.


Does not drain the water at the end of cycle - Dishwasher ...

https://www.ifixit.com/.../Does+not+drain+the+water+at+the+end+o...
iFixitThe dishes seem clean, but the water from the last cycle remains in after it has stopped. ..... noticable cracking noise when the machine was triying to drain the water.... to purchase a timer unnecessarily and they usually won't take them back.
Checking a Drain and Circulating Pump in a Dishwasher ...? 4:17www.youtube.com/watch?v=oLPBlkIsB5sMar 26, 2010 - Uploaded by ApplianceHelpOnlineIf your dishwasher doesn't pump out or will not wash watch this video. ... GE Nautilus Dishwasher wont run - fills water and doesnt drain - motor ...How to repair a dishwasher, not draining - troubleshoot ...? 6:18www.youtube.com/watch?v=rO19zoOyNHAFeb 26, 2014 - Uploaded by AdamDIYHow to repair a dishwasher, not draining - troubleshoot Whirlpool ... awhile but now blade on grinder won't spin. what should be my next step? thnx ... from the bottom to access the water pump. but this was much simpler and it worked. thanks. ... If I manage todrain it now, I'll do what this video instructed :).

Oct 19, 2015 | Dishwashers

1 Answer

How do I find and check the drain hose on my GE PDW8480 dishwasher?


The drain hose normally goes to the air gap located next to the sink faucet if it doesn't have that make sure the hose is higher in the middle than it is where it drains to the garbage disposal the dirty water is coming from ur sink from when u wash dishes then it goes back to the dishwasher you need to elevate the drain hose

Apr 12, 2013 | GE Profile PDW8400J Built-in Dishwasher

1 Answer

Dishwasher overflowed, garbage disposal still works. Ran the dishwasher and noticed food and debris shooting back into sink thru garbage disposal. Water was on floor. Upon completion of full cycle, water...


Before loading into the machine you have to remove food particles. Washer will wash the greasy surface. If particles are left in the dishes, the same will find entry to the drain system. Check the drain filter in your machine. Clean them. Mostly problem will be solved!

Apr 08, 2010 | GE 24 in. Profile PDW9880JSS Built-in...

1 Answer

Ge triton xl makes loud noise when filling with water - water pump proboem ? or other possible cause? easy fix?


GE Triton dishwasher loud noise after draining water. We started to hear a sustained and loud noise after water is drained. This noise is not heard during washing and draining times. What is wrong? Thanks a lot!

Oct 19, 2009 | GE 24 in. GSD6660GSS Built-in Dishwasher

1 Answer

GE Triton Dishwasher fills with water but no spraying occurs.


Trouble shooting GE dishwasher
Model GSD6600G00WW

Air gap is clean
Garbage disposal is clean
Dishwasher fills with water OK
Drain pump runs after a wait of several minutes and seems to run slow but drains most of the water out of the reservoir.
Dishwasher is not running the wash cycle (spraying water on dishes)

Jan 27, 2009 | GE 24 in. GSD6660GSS Built-in Dishwasher

1 Answer

GE Triton XL, Dishwasher, while washing dishes in the sink


Ho could be a blockage in the dishwaser pump, is the drain plug clear .............

Jan 17, 2009 | GE Tritonr XL GSD6260JCC Dishwasher

1 Answer

Ge Triton XL Dishwasher Fill Problem


I would check your fill valve screen, where your water line connects to the dishwasher, lots of times i will see that screen clogged, especially on customers homes that have wells.

There is no way to change the fill time on these.
There is also the potential problem with the float sticking if it is gunked up it will not allow water in...see that it moves up and down freely and you should here a clicking noise.....If it is not one of these there could be a problem...with the timer...I am providing a link that will help walk you through this problem in a more technical...manner...if you are not comfortable performing these tests...i suggest you forego it and let a tech handle it....

http://www.applianceaid.com/dish.html#filling (http://www.applianceaid.com/dish.html#filling)

this is one continuous link.....you can scroll down until you see the won't issue.
I hope this helps ..good luck, have a good day& please rate my effort......The Fang

Dec 31, 2008 | GE 24 in. GSD6660GSS Built-in Dishwasher

2 Answers

Triton XL GE Profile Dishwasher does not wash dishes well, but in particular, leaves a cloudy film.


If the water doesn't drain from your dishwasher, check these:
Drain line/air gap Aclog in the drain line or air gap (if there is one) is the usual reasonthat a dishwasher won't drain. Often the problem is at the point wherethe drain line attaches to the garbage disposer or household drainline. If you remove this line, you can clear any debris from the hoseor hose connection. Be sure to reattach the hose before starting thedishwasher again.

Pump Yourdishwasher pump ejects the water. The pump is usually mounted directlyto the motor, then attached to the bottom of the dishwasher. You canreach the pump from inside the dishwasher, but first you need to removethe lower rack, the spray arm, and the spray arm support.

Lookfor an impeller--a round plastic fan blade-type of device that spinsaround. This is the wash impeller, which forces the water through thespray arm. Beneath the wash impeller is the drain impeller, which issimilar in size and shape to the wash impeller. The drain impellerpushes the water toward the drain port. These components make up thepump. If any of the pump components are defective, you need to replacethem.

Drain valve and/or solenoid Manydishwashers use a drain valve with an electric solenoid. Whenelectricity flows to the solenoid, the valve opens and diverts thewater to the drain. Sometimes the solenoid, or the diverting lever,sticks and prevents the dishwasher from draining or filling properly.Try to free up the solenoid to lubricate the lever. Otherwise, you mayhave to replace the solenoid or pump assembly. With these systems, themotor always rotates in one direction. When it's energized, the drainvalve diverts the water.

Other dishwashers simply reverse thedirection of the motor to drain the dishwasher. These units don't havea drain valve. Instead, there's a drain hose connected directly to thepump housing.

Belt One brand of dishwasher uses a belt to drive the pump. If this belt is broken or has fallen off, replace it.

Motor Ifthe motor isn't turning or working, the unit won't drain. First checkto be sure you have power to the dishwasher. If not, see the section"It doesn't work at all." If the motor hums but doesn't turn, it mayneed to be replaced.

Some dishwashers are susceptible togetting stuck if you don't run them regularly. If you haven't run thedishwasher for more than a week, you may need to manually spin themotor to free it up. If the motor is defective, you need to replace it.Dishwasher motors can't be serviced.

Timer Partof what the timer does is control the motor and drain valve. If thetimer doesn't work properly, the water may not drain and you need toreplace the timer. This problem is uncommon.
As for testing water hardness, you can find these at your local plumbing store, or even the electricals where you bought the dishwasher from.

Hope that helps!

Sep 28, 2008 | Dishwashers

1 Answer

GE Triton XL


Try placing a packet in the bottom of the DW and then start a wash cycle ( use the energy efficient cycle that does not use the heater to dry the dishes..).. if it is not disolved at the end of the cycle then your water temp may not be hot enough..Hope that helps..

Aug 28, 2008 | GE Tritonr XL GSD6260JCC Dishwasher

Not finding what you are looking for?
GE Tritonr XL GSD6260JCC Dishwasher Logo

385 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike

Level 3 Expert

4332 Answers

Are you a GE Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...