Question about Optics
I LOST THE CAP AND WOULD LIKE TO GET A REPLACEMENT.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: zeroing scope adjustment
First, adjust wind-age and elevation to center or zero position. Remove your scope from the gun and make sure that the scope mounts are aligned, this is critical. Purchase an alignment tool is necessary. Then remount the scope. The scope should seat in the mounts without binding. If it does bind, the mounts are not aligned.
Start sighting in at close range,10 to 30 yards, then move out to 100 yards.
Posted on Jan 25, 2009
Tried google for zeiss rifle scopes I just did and see they have a suport division...try there and get it from the horsies mouth!!!
Posted on Jun 19, 2009
SOURCE: simmons 8x32-44ao rifle scope
Is that the "Prairie Master"? I think Simmons is pretty uniform in that range of scopes--elevation adjustment should be the top dial and windage is on the side. The zoom locking ring should be in front of the eyepiece, with the zoom ring just forward of that.
You can download a generic Simmons scope manual from the Simmons site at this link: http://www.simmonsoptics.com/downloads/manuals/archive/HSI_Simmons%20Generic%20Scope%20Adjusting%20Instructions.pdf
Posted on Apr 04, 2010
Tips for a great answer:
Nov 20, 2013 | Zeiss Optics
Sep 30, 2013 | Zeiss Optics
Feb 28, 2011 | Zeiss 4.5-14x44mm Conquest Target Rifle...
Jan 05, 2011 | Zeiss CONQUEST 3-9X40 MATTE Z PLEX
Apr 07, 2010 | Zeiss 6.5-20x50 AO MC Conquest Stainless...
Jun 07, 2009 | Conquest Zeiss 3.5-10x50 Mc Rifle Scope :...
Jan 16, 2009 | Zeiss CONQUEST 3-9X40 MATTE Z PLEX
I'm not sure how this got posted in the car audio section...
If the scope was manufactured by a well established company, you should be able to get a new cap from them.
If you cannot locate the manufacturer, you can move the other cap to the windage adjustment to set the windage. Then when you're finished, move the cap back to the elevation adjustment.
Even if you use it for a shooting discipline that requires constant adjustment, it's unlikely that you'll need to use the windage adjustment for anything other than setting the zero.
Oct 16, 2007 | Hifonics Titan TX 8805 Multi-Channel Amp...
90 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: