Question about Bose (321GS) System

Open Question

Best place to install ir sensor on bose v35 - Bose (321GS) System

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Bose 3-2-1 IR sensor

The IR Receiver is on the Front behind the snap-off front cover. Note you have to take off the front shroud of the DVD player to get the front cover off. Also note the IR is very very delicate and the slighest wrong move will remder the board it connects to broken. If you can get the dvd shroud and front cover off - you'll see what looks like a small rubber dot in the center (top to bottom ) and (side to side). Good luck. Bose does NOT make these units so consumers can work on them. I only know how this works as I too and trying to get my unit repaired and I won't be held hostage by Bose.

Posted on Mar 31, 2008

Ad
  • 1 Answer

SOURCE: Where is the IR sensor on a Bose 3-2-1 Series II?

I believe I've found the IR sensor. By shining a flash light on the various parts of the normally opaque shield over the front of the Bose, I was able to spot what I believe to be the sensor on the extreme right end of the shield, vertically centered. Later today I hope to verify this by connecting everything and using the remote through the Xantech. If it turns out that I'm wrong, I'll post again.

Posted on Feb 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to connect an iPod to my Bose Radio


<p>The manufacturer offers two radios Bose iPod connection kit to connect an iPod to the radio. You can purchase the kit to connect the wave or acoustic wave connect kit. Both kits come with a USB audio connection, an iPod dock for iPod, a battery that plugs into the wall and a remote control to use the iPod while in dock. Download all the upgrades to your iPod through Apple's website before connecting a Bose radio. <br /> <p><br /> <p>1. Connect one end of the audio cable is included with the connection kit for iPod "Aux In" on the back of the Bose radio. <br /> <p><br /> <p>2. Connect the other end of the audio cable to the "Audio Out" on the back of the iPod dock. <br /> <p><br /> <p>3. Connect the adapter to an outlet connection kit. Connect the other end of the battery to the "DC Power" on the back of the iPod dock. <br /> <p><br /> <p>4. Set the iPod dock on the right side of the face of Bose radio out. Align the IR sensor on the front of the iPod dock with the IR sensor on the front of the Bose radio. <br /> <p><br /> <p>5. Place the iPod firmly in iPod dock. Point the remote at the IR sensor, iPod dock. Press the "iPod" for the iPod <br />

on Aug 09, 2011 | Apple iPod touch

1 Answer

I had Bose lifestyle V35, V20 try to link together. Bose link AL8 transmitter will not connect to receiver. both led is light solid green. Please help.


The commands for the Bose link system are actually going through the remote control system. In order to use the system you need not only a set of AL8 sender and receiver, but also a special remote control model RC48S2-40 these model numbers are slightly different for the US and for Europe. In addition you will need to activate the BoseLink connection through the system settings menu and you will need to tell the remote to which system it needs to talk. When you have done all that, there should not be any problem to "connect" the two systems. If this does not work, you may need some specialized help from a Bose specialist who understands this multi room set-up.

Nov 09, 2014 | Bose link AL8 wireless home-wide audio...

1 Answer

How to install a bose sa3 to a bose v35


How to install a bose sa3 to a bose v35....http://m.topix.com/forum/who/bose/TOH8RAETEKGB8966I/p2. See the link above . Sometimes audio cable quality n the ohm makes a difference . 12_27_2013_11_17_29_pm.png

Dec 12, 2013 | Audio Players & Recorders

1 Answer

Bad distortion of Bose Lifestyle V35


It may be due to one of the component attached. Detach all the components and test by connecting one by one. Try connecting radio at last.

Mar 24, 2013 | Bose Lifestyle V35 Theater System

1 Answer

Bose Lifestyle V35, sound but no image.


Thank you so much the unplug the power from the system worked after hours of trying other stuff
Huge thank you

Aug 14, 2012 | Bose Lifestyle V35 Theater System

2 Answers

I bought a Bose V35 2 weeks back. I played my system yesterday and switched off. Since this morning I am unable to switch on the system. Green light keeps blinking and I keep getting the message "iPod...


Hello,
With this system being so recent from purchase you should return it to the store as it is faulty. DO Not Attempt to do any "Mr Fix It" type repairs as it will invalidate any warranty (standard is 12months from new in UK)

Jan 07, 2011 | Bose V35 Theater System

1 Answer

Where is the IR sensor on a Bose 3-2-1 Series II?


I believe I've found the IR sensor. By shining a flash light on the various parts of the normally opaque shield over the front of the Bose, I was able to spot what I believe to be the sensor on the extreme right end of the shield, vertically centered. Later today I hope to verify this by connecting everything and using the remote through the Xantech. If it turns out that I'm wrong, I'll post again.

Feb 13, 2009 | Bose (321GS) System

2 Answers

Bose 3-2-1 IR sensor


The IR Receiver is on the Front behind the snap-off front cover. Note you have to take off the front shroud of the DVD player to get the front cover off. Also note the IR is very very delicate and the slighest wrong move will remder the board it connects to broken. If you can get the dvd shroud and front cover off - you'll see what looks like a small rubber dot in the center (top to bottom ) and (side to side). Good luck. Bose does NOT make these units so consumers can work on them. I only know how this works as I too and trying to get my unit repaired and I won't be held hostage by Bose.

Mar 31, 2008 | Bose (321GS) System

Not finding what you are looking for?
Bose (321GS) System Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bose Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Ben Armstrong

Level 2 Expert

334 Answers

Are you a Bose Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...