On power up, shows error code C2FE0168 briefly, then panel lights flash and screen goes blank
SOURCE: screen blank and orange light flashing
I have an HP 2710 in excellent condition. I lost the power supply when moving from Texas to California.
I have since purchased another HP four in one macnine and could easly justify selling this one. My price would be low and I would be willing to ship for a few dollars. I am good at packing so it will not get damaged. Willing to sell for $35.00 and estimate $12.00 for packaging and shipping costs.
SOURCE: hp laserjet3030 is put on it shows" Scanner Error"
Hi ritaccpl: Here is your problem. 52 Scanner Error The all-in-one has experienced an internal hardware error. 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. If a surge protector is being used, remove it. Plug the all-in-one directly into the wall socket. 3. Check the FFC connection between the formatter and the scanner. NOTE Do not bend or fold the FFCs during the removal or reinstallation process. 4. Try connecting the product to a different power source or surge protector. 5. Turn on the power and wait for the all-inone to initialize. 6. If the error persists, replace the laser scanner assembly. Hope this helps
SOURCE: i have a new hp officeet pr 8500 printer but on
This error means there's an ink leak in your printer. HP recommends that you turn the printer off (using the power switch at the back of the printer), wait 20 minutes and turn the printer on (condensation may be causing error and the printer needs time to dry).
326 views
Usually answered in minutes!
×