Question about Computers & Internet

1 Answer

Perixx Peritab 301 pen not registering properly

I've had this tablet for a few weeks, but the problem came up unexpectedly recently. The pen does not effect the pointer unless the nib is pressed right down ( and then it insists on auto-clicking everything it rolls over ) or the default scroll button is held down ( in which case clicking on anything is impossible ). As you can imagine, this makes using the pen tool impossible. My first thought was that it might be a low battery, but replacing it with new ones doesn't seem to have changed anything. I also tried replacing the nib and callibrating the Flicks settings, but it didn't work. Nor did reinstalling the drivers and the company's website offers no solution. Anyone have any idea how to fix it?

Posted by on

  • 1 more comment 
  • Veronica Arrigoni Jul 29, 2013

    I don't know if you are still intrested in solutions, but recently I had the same problem of yours.

  • Veronica Arrigoni Jul 29, 2013

    I tried everything (I also formatted the laptop)

  • Veronica Arrigoni Jul 29, 2013

    in the end I contected the customer service and they said they will send me a replacement wITHOUT ANY EXTRA PAYMENT.. I think they shoul fix it, since is a recurring problem apparently, but for now I'm satisfied (very quick answers and no extra payments as I'va already said).. If you're still intrested I'll let you know how it ends!

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I don't know if you still have that problem and if you still need a solution, but I had recently had the same problem of yours.
My solution (I had even formatted the laptop) was writing to the perixx assitance and after a few mail they said they will send me a replacement without paying anything at all!
I think they should fix the problem, since it appeare to be recurring, but for now I'm satisfied of the custom service (very fast reply and as I've already said they don't charge me for any extra payment)
If you are intrested I'll let you know how it ends!

Posted on Jul 29, 2013

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: Pen press problem

saame friggin problem

Posted on Aug 13, 2008

  • 2 Answers

SOURCE: Tablet not recognizing pen unless pressing down with it.

Hi, i browsed the Net in three languages to find the solution for this problem but nothing helped, then, accidentally, i bumped into the solution that helped me. I tried everything the same way you did but nothing helped. Since I use the russian version of Windows I do not know how these options might be named in english, but I think you'll understand. In Control Panel there is, as you know, the setup for pen and tablet input (with a picture of a pen) - in it there is a setup for Gestures (the middle one) - in it i disabled the gestures a long time ago. But today i tried turning it ON and went for training of these gestures (the option in blue letters at the very bottom) - and during the training my pen started hovering normally again after half a month of this problem. So I left the gestures enabled after completing the training and it still works fine. Hope it helps you,

Posted on Mar 02, 2010

  • 1 Answer

SOURCE: Aiptek 12000U "Pen Pad" is missing functions/doesn't work in XP

Same problem here. Back in XP we found we could use another manufacturer's drivers (they apparently share some/all of the same internal hardware), but I haven't found any working alternatives yet (I have not tried them all). In 2006 someone posted: "YES! Adesso, Aiptek, Trust, Medion and another company are all distributing the same graphics tablet, just rebranded! So far, Adesso seems to have the most recent driver developments (version 3.09 vs. aiptek's version 3.08), so I used Adesso's (right from their website)."

If you find a solution, please let me know.

I'm also having a big issue with the pen's cursor flickering between two places (vertically-offset from each other, closer and closer together if I move it towards the upper left side of the screen). It doesn't do this in relative mode. Switching back to absolute caused it again, then I repeated the process and now it works, but the pen-area is not set properly, so I'm looking for the extra tabs which let me/us set the rectangle area for absolute mode.

Posted on Nov 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The pen on my Samsung Galaxy tab 3 only works sporadically. ..... it'll start recognising threw pen when it's about 2 inches away from the tablet...... there are some spots. .....s note mainly. ..... that...


you mean galaxy note 3 .first be sure the pen has a nib in it not a hole where one has fallen out. then it is about 1/16th or so outof the pen and rounded next try replacing the pen nib your phone came with a packet of replacements. they pull out and are snapped back in. Last and for sure , there is actually a battery inside the pen if it is old and weak you will have to get another pen say from ebay (best price) but before you do go to phone store and use one of theirs to test . if you have the same problem and only certain spots do not work on the screen then your digitizer screen is in need of replacement. also another ebay cheapest item. but whatever it turns out to be it is fixable. come back if you need advice will check every couple weeks.
So pen has nib , or nib needs replacement,pen has weak battery and need replacement or digitizer needs replacement. all solutions are under 100 dollars most under 50 . no nibs or bad nibs under 15.

Dec 23, 2014 | Samsung Galaxy Tab on 3 Mobile Tablet PC

1 Answer

Does the Wacom Intuos2 Classic Pen (xp 300e) work with the Wacom Bamboo CTL 470 tablet?


From what I read on Wacom's site, they are NOT compatible.
The Bamboo use a stylus that is different than the nib pens that the Intuos use. The stylus for the Bamboo is more like the stylus you can purchase for smart phones. The Intuos pens are pressure sensitive and have different nibs you can use for different effects and feel. You can go to their website and look for compatible pens and stylus' for your specific tablet.

Aug 02, 2014 | Wacom Intuos2 Classic Pen (XP-300E)...

1 Answer

Why won't my wacom grip pen click when it touches the tablet instead of hovering and selecting text?


Have you tried pulling the nib out (the end bit you draw with)? It could be that something is sticking the nib further inside the pen than it should, which is telling the pen you are applying pressure. As far as I know there is a little spring inside the pen that the nib pushes on when you touch the pen to the tablet. Perhaps the spring is permanently squished in.

May 26, 2014 | Wacom Intuos3 Grip Pen

2 Answers

Pen keeps drawing when I lift it off tablet


This problem commonly occurs due to a stuck "nib" sensor (the sensor that detects pen pressure).

Take out the "nib" (important, so the sensor isn't damaged further) and whack the pen on your desk (or drop it on the floor from 3 feet up). It re-seats the "nib" sensor when it's stuck. If this doesn't work after multiple attempts, then the sensor may be too damaged.

Nov 28, 2009 | Wacom (EP130EPE) Digital Pen

1 Answer

My Wacom Bamboo Tablet Pen: only the pen was dropped. Now the eraser works but the pen tip does not. Neither do the buttons. The tablet itself does not pick up the pen tip's presence, but it works perfect...


Try replacing the pen nib. Take out the little nib with a tweezer or something along those lines and replace it with a new one. There should be a few of them when you bought the tablet. Also, try looking at the tablet properties.

Feb 02, 2009 | Toshiba Portege M200 Tablet PC

1 Answer

The 5 extra nibs for pen missing or where are they?


the extra nibs comes in the same plastic package as the pen, there's very small tapped beside the pen

Jan 10, 2009 | Wacom Intuos3 Graphic Tablet

2 Answers

Intuous pen "sticking"


Take out the "nib" and whack it on your desk (or drop it on the floor from 3 feet up). It re-seats the "nib" sensor when it's stuck. If this doesn't work, then the sensor may be too damaged.

Sep 18, 2008 | Wacom (EP130EPE) Digital Pen

1 Answer

Classic Pen Woes


Hi , Mnemosyne , i'm the Guest who had the exact same of your problem , i contacted WACOM and there solution was as follow : " This problem is, although uncommon, usually easily fixable. The first and fastest solution is to simply press the eraser a few times to release it from binding on the side of the pen. If that does not work, pull the white plastic nib, and take a fingernail file (LIGHTLY) to the back end of the nib, making sure to remove any burs or flaring from the nib. I have seen this problem myself, albeit uncommon " , they also suggested if all fails then change the nib ( and thats exactly what i did , i changed the plastic nib with the felt nib - i like it better anyways thats why i didn't bother filing the plastic nib - and WALA my problem was solved and the pen is working like a charm , hope this helps .
SLH

Jun 21, 2008 | Wacom Intuos3 6x11

1 Answer

Pen sensor problems


you take out the nib by using a pair of tweezers or a nail clipper but, (now this is what happened to me) is your tablet plugged straight into your computer OR into a usb ADAPTER as if you do that, sometimes it completely mucks things up. make sure it goes straight into your computer as when i did this my tablet was fine

Jun 12, 2008 | Wacom Graphire4 Digital Pen

8 Answers

Bamboo fun tablet pen not working


to change to nib not nub, you get tweezers and firmly grip the tip and pull then slide a new one in

May 23, 2008 | Wacom Bamboo Fun 5.8" x 3.7" USB Tablet...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

375 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...