Question about Sanyo DP50747 50 in. Plasma TV

Open Question

Need Help I have a sanyo DP50747 plasma no power I replaced the fuse on the main board location of blown fuse was F181 and 180 turned ov tv and worked great untill I shut it down at that time I heard

Sanyo plasma DP50747 with samsung mainboard PSPF561a01a rev.dr3....0.8 date....070120 I dont know if this helps what happened to the markings on the outside of mainboards like 1234567890,abcdefghijk so you can locate a part on your board??? I miss that

Posted by on

  • 2 more comments 
  • Mark Peterson Dec 02, 2012

        Need Help I have a sanyo DP50747 plasma no power I replaced the fuse on the main board location of blown fuse was F181  and 180 turned ov tv and worked great untill I shut it down at that time I heard a pop and had to reopen the tv, I took the main board PSPF561a01a out and a found a screw from the stand hadfell behind themain board causing a short between R503 and jumper jp157 on the back side of the board the pop noise was thermister location,TH101 part number SCK206,I checke all diodes around TH101 and none shorted or open??..I do not want to replace SCK206 untill I have talked to someone that knows what thay are doing,(Im a newbee)  and don't want to cause more dammage to the board ..So please help walk me through this  Markusssss and thanks

  • Mark Peterson Dec 02, 2012

    I think there 8ah 250v ,also I have great pictures of my board if that will help??

  • Mark Peterson Dec 02, 2012

    But I cant upload them to big

  • Mark Peterson Dec 02, 2012

    Need Help I have a sanyo DP50747 plasma no power I replaced the fuse on the main board location of blown fuse was F181 and 180 turned ov tv and worked great untill I shut it down at that time I heard a pop and had to reopen the tv, I took the main board PSPF561a01a out and a found a screw from the stand hadfell behind themain board causing a short between R503 and jumper jp157 on the back side of the board the pop noise was thermister location,TH101 part number SCK206,I checke all diodes around TH101 and none shorted or open??..I do not want to replace SCK206 untill I have talked to someone that knows what thay are doing,(Im a newbee) and don't want to cause more dammage to the board ..So please help walk me through this Markusssss and thanks

×

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 17 Answers

SOURCE: Have a friend who owns a 50 in Sanyo plasma tv.

If you have a part number for the board this place could carry it. They sell thousands of parts for tv's. check it out www.shopjimmy.com

Posted on May 08, 2009

Ad
seanpwright
  • 2030 Answers

SOURCE: i am trying to locate a fuse for a Sanyo plasma

thats a 10 amp fast blow fuses rated for 250v

You can get them at any Radio SHack Store

Posted on Apr 01, 2010

Testimonial: "fast and accurate thanks a million "

  • 2318 Answers

SOURCE: My Sanyo DP50747 went dead.

I would suggest to visit this site and ask them if they have one or they could also repair the defective power supply.

Posted on Sep 08, 2010

  • 1 Answer

SOURCE: ysus board number for a sanyo 50'' plasma model dp50747

I just bought a Sanyo DP50747 50 inch plasma. When I pause the tv, then push play (even 1 minute or less) the sound does not start as soon as the picture starts back. I have picture first and no sound for 4 or 5 seconds then the sound continues from that point.

Posted on Mar 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you check for blown fuses


If the TV gets on, there are no blown fuses inside. Check your power outlet for any loose contacts. It could also be a problem with the power cord. If these are ok, It is actually going into protection mode, due to some board/component failure. This needs the attention of a service technician.

Aug 05, 2012 | Sanyo DP50747 50 in. Plasma TV

1 Answer

Sanyo dp50747 powers on but no picture or sound


There is an internal fuse if could be blown. If the fuse is good you might try reflowing the solder on the power board.

Apr 04, 2012 | Sanyo DP50747 50 in. Plasma TV

1 Answer

Fuse location for a 50" sanyo tv


The fuse should be located on the power supply board. You'll have to remove the back cover to access it. I posted a link of what the board should look like.

http://www.shopjimmy.com/vizio-aax30284301-power-supply.htm

Sep 24, 2011 | Sanyo DP50747 50 in. Plasma TV

1 Answer

Have a sanyo 50" plasma


This tv problems are related to powering up the tv and sustancening the tv power source to the tv itself.Replaced the tv sub power supply board where the a/c power cord plug into it.Try website like Ebay.com to buy a whole new refurbish sub power supply board for the replacement.

Sep 06, 2011 | Sanyo DP50747 50 in. Plasma TV

1 Answer

Model # DP50747 are all 5 fuses the same? where can I get a list of parts?


Sir it has different types of rating it is commonly printed in the main board or printed exactly at the fuse. The parts try to check this link http://www.shopjimmy.com/sanyo good day and best regards.

Sep 02, 2011 | Sanyo DP50747 50 in. Plasma TV

1 Answer

Sanyo DP5747 Plasma TV no power


Found 1 of the 2 ac supply ( 8amp) fuses blown on the main pwr. supply. Replaced fuse and good so far. Looked over the ps for damaged components, none found. Checked current with ampmeter with tv on, showing 3amps. Cheers

Jan 03, 2010 | Sanyo Televison & Video

1 Answer

Sanyo DP50747 50" Plasma sound but no picture green light is on.


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Apr 25, 2017 | Sanyo DP50747 50 in. Plasma TV

Not finding what you are looking for?
Sanyo DP50747 50 in. Plasma TV Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74377 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

 Grubhead
Grubhead

Level 3 Expert

5151 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...