Question about Creative Labs WebCam Live!

1 Answer

Problem usb

I have a camera sn9c201(50) serial number 5.7.19100.100 and i can't use it when i try to launch it a dialog message show that no graph is shwing and when i try to instal and reinstall the same problem usb not found or unsigned plz help me that i will solve this problem and so i can use it properly
thanks dear sidali

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Did you install the software with the camera connected to the computer? Disconnect the camera from the USB port and reinstall the software. When the program asks you to connect the camera, do so, and it should work. Hope this is of some help. Bud

Below is info for setting up Audio & Video to chat on line after you install , either Skype or a messenger program.


Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:

  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: You audio and video shoud work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Programs won't launch for the Stylus 7030. When I plug my USB cable into the computer, there are no programs to launch to view my picutres. The dialog box is empty and there is nothing to select.


Consider NOT connecting the camera to the computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive. Or you can use any photo cataloging program.

Nov 28, 2010 | Olympus Stylus 7030 Digital Camera

1 Answer

I get this error message.. an error occurred communicating with the scanning device. Please ensure that the scanning device is connected properly and try again. Nothing seems to work,, this message...


Hi,

#Click Start , select Settings , and then click Control Panel .
#Double-click System . The System Properties dialog box displays.
#Click the Hardware tab.
#Click Device Manager . The Device Manager dialog box displays.
#Click the plus sign (+ ) next to Universal Serial Bus Controllers .
#Click the USB Composite Device entry, and then click Remove .
#Disconnect the USB cable from the All-in-One, wait for few seconds, and then reconnect the cable. The New Hardware found dialog box displays.
#Click Next through all of the screens that display while the Wizard installs the USB composite device, and then click Finish .

Regards
Riztech

Oct 24, 2010 | HP Officejet 7310 All-In-One Printer

1 Answer

My graph not working it is reading a message


You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

Mar 05, 2010 | Texas Instruments Office Equipment &...

1 Answer

How to print a graph off of my ti84 plus calculator? i downloaded ti connect, but nothing happens when i click on ti screen capture


Hi,
You say TIConnect is installed. Ok. Prepare you cable, and your calculator. Draw the graph you want to capture to the computer. Connect the cable to the calculator and connect the other end of the cable to the computer port (Serial port, or USB port). Make sure the calculator is still ON.

Run TIConnect. In the main window click the button TIDeviceInfo. This will launch the communication program between the calculator and the compouter. In the Select TI device the softaware must fin the calculator. If it does not you, will not be able to capture the screen.

Hope it helps.

Nov 24, 2009 | Texas Instruments TI-84 Plus Calculator

1 Answer

Says thers a broblem with webcam disconnect reconnect


i have a webcam sn9c201(50) serial 5.7.19100.100 and i can't use it when i try to launch it there ius now graph or usb not signed plz help me that i can use it properly

Jan 11, 2009 | Computers & Internet

1 Answer

Wont usb connect!


go into device manager and update the drivers on the newly found hardware. If they are already installed used the disc to re-install from device manager.

Then add the application on whilst the item is discomnnected

Re-connect and launch application. Should work.

Dec 24, 2008 | Logitech Harmony 525 LCD Remote Control

1 Answer

Can't launch camera software after updating. windows XP


Always Start an Application in Administrator Mode on Windows Vista. Many utilities need to be run as administrator in order to function properly. All shortcuts in Windows Vista have a special property that you can set that will allow the application to run as Administrator. To set this property, just right-click on any shortcut, and click the Advanced button on the Shortcut page to get to the Advanced Properties dialog. You’ll see a dialog with a checkbox for “Run as administrator”. From now on, the application will always run as administrator if you use the shortcut to launch it.

Dec 06, 2008 | Computers & Internet

1 Answer

Can not run Nikon Capture 3 - "Updated Driver Required"


Under some limited conditions, Nikon Capture 3 will fail to launch after the initial installation and you will not be presented with the opening dialog which allows you to select either "Trial" mode or be permitted to enter your serial key. A dialog box is displayed indicating that updated drivers are required, but the names of these drivers are not listed. This installer replaces two files with updated versions which resolves this issue and allows Nikon Capture 3 to launch. Do not install this update if you are already running Nikon Capture in trial or registered mode. This update is not required for any version of Nikon Capture other than 3.0. This updater is not needed for Macintosh users. After downloading and decompressing, double click the "Setup" application to install. http://www.nikonusa.com/software/Cap3update.zip

Aug 30, 2005 | Nikon Coolpix 5000 Digital Camera

1 Answer

Can not run Nikon Capture 3 - "Updated Driver Required"


Under some limited conditions, Nikon Capture 3 will fail to launch after the initial installation and you will not be presented with the opening dialog which allows you to select either "Trial" mode or be permitted to enter your serial key. A dialog box is displayed indicating that updated drivers are required, but the names of these drivers are not listed. This installer replaces two files with updated versions which resolves this issue and allows Nikon Capture 3 to launch. Do not install this update if you are already running Nikon Capture in trial or registered mode. This update is not required for any version of Nikon Capture other than 3.0. This updater is not needed for Macintosh users. After downloading and decompressing, double click the "Setup" application to install. Click here to agree to license and Download the Capture 3 Installer Update http://www.nikonusa.com/software/Cap3update.zip

Aug 29, 2005 | Nikon Coolpix 5700 Digital Camera

Not finding what you are looking for?
Creative Labs WebCam Live! Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Computers & Internet Experts

micky dee

Level 3 Expert

2635 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Shawn DuRee

Level 3 Expert

355 Answers

Are you a Creative Labs Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...