Question about Baby Lock Imagine

Open Question

Auto threader is not working on my babylock bmp9

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 185 Answers

SOURCE: unable to thread lower looper on Babylock Eclipse BLE1SX

On rare occasions lint can clog the yubes on these sergers. One of the first things I do is thread the wire through in the opposite direction. It will sometimes push the blockage out. The other option is to use an air compressor and again blow the lint out from the opposite side. If this does not work take it to a service man.

Posted on Feb 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Babylock BMP9 6 needle embroidery machine. The automatic needle threader mechanism is not dropping down far enough to use to thread the needles. Any suggestions on how to fix this?


On older machines that do not have the automatic needle-up feature, the user needs to manually adjust the needle height so the threader will match the needle eye.

...

Oct 29, 2016 | Sewing Machines

1 Answer

Need owners manual for babylock encore


The following website is very dependable:

http://www.sewingpartsonline.com/needle-threader-singer-503277.aspx

Apr 18, 2015 | Sewing Machines

1 Answer

Auto threader wont thread


Move the needle to the top.
Loosen the screw on the threader.
Use the threader as if you are using it. You will have to adjust it to the side and up or down. Move it so the threader is in the needle hole.
Tighten the needle.
If it still doesn't work you may need to replace the threader.

Apr 18, 2015 | Sewing Machines

1 Answer

Replacing the self threading part of the ellismo


Does the machine go through the motions but not thread the needle or is there no motion at all? If it is the first one, the threader head needs to be replaced. If it is the second, take the machine to your local Babylock dealer for repair.....it is not easy.

Nov 25, 2013 | Baby Lock Sewing Machines

1 Answer

Cant make the auto threader work on an elna 2007


Do you mean the auto needle threader?

Mine won't work on very small needle sizes so I resort to the old manual needle threader for these. Ditto for twin needles.

Otherwise its a case of pulling the auto threader down so the hook swings into the needle eye, then pulling the thread over the face of the needle and catching it into the hook, then release the threader so it pulls back through the needle eye, taking the thread with it.

The only other thing that springs to mind is "is the needle at the top position in its stich cycle so that the threader lines up with the needle eye?

hope these ideas help a little.

Dec 03, 2010 | Elna 2007 Mechanical Sewing Machine

2 Answers

AUTO THREADER CAME OUT


When you activated the threader, the needle was down and the threader came off or broke.

If it is not broken, you may be able to push it back into place.

Turn off the power and tip the machine back on some towels so it does not slip and with a flash light check the area where it fits and see if you can get it back into position.

If not, will have to thread the needle the old fashion way.

Check with your Brother dealer to see if they can look at the machine while you wait.

They may be able to get it back together or they will have to replace the threader.

It is possible they will have one in stock, or they may have to order it.

May 01, 2010 | Brother CS-8060 Computerized Sewing...

1 Answer

Babylock ellegante threading problems


It is something I cannot explain how to do on here, you need to be shown, would suggest you get in touch with a sewing machine tech.

Mar 28, 2008 | Sewing Machines

2 Answers

Baby Lock Eclipse threader looper


The part number is B8200-01a and you can get it from any authorized babylock dealer.
Give them this number and they can order it.

Dec 19, 2007 | Baby Lock Eclipse Serger

1 Answer

Unable to thread lower looper on Babylock Eclipse BLE1SX


On rare occasions lint can clog the yubes on these sergers. One of the first things I do is thread the wire through in the opposite direction. It will sometimes push the blockage out. The other option is to use an air compressor and again blow the lint out from the opposite side. If this does not work take it to a service man.

Dec 18, 2007 | Baby Lock Eclipse Serger

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Lock Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Chris Wetmore

Level 2 Expert

185 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Are you a Baby Lock Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...