Question about Canon MP560 All-In-One InkJet Printer
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: check ink u163 error message
Firstly I suspect you are not using genuine cartridge or you have refilled the cartridge.
To fix this you need to disable the ink checking procedure.
Do you know that low ink or ink has run out message appears once cartridge empty. If you want to use refill ink in that cartridge then you need to deactivate ink level to get your printer run as usual. Check the following tips to fix low ink error message in case of refill ink usage. Below some methods to deactivate ink level detection function for some models due to its similarity.
Press RESUME/CANCEL button once
BJC series: bjc3000,8200,etcS series: s400,600,800,6300,9000etc
i Series: i255,320,350,355,450,470d,550,560,850,950,6100,6500,9100,etc
Pixma series: ip1000,1200,1300,1500,1600,1700,2000,2200,3000,4000,etc
Hold down RESUME/CANCEL button for 5 seconds or more
Latest models of Pixma series: ip1880,1980,3300,3500,4200,4500,5200,6700d,pro9000,9500,ix4000,5000,etc
Press START button once, select COLOR button for colour cartridge; BLACK button for black cartridge
Hold down STOP/RESET button for 5 seconds or more
Latest models of Pixma MP/MX series: MP145,228,245,520,800,850,970,MX308,318,7600,et
Posted on Jun 21, 2009
Those cartridges don't refill unless you have a way to reset the internal chip. Check online for refillable cartridges or a chip resetter. For priming you go into printer properties and choose maintenance and head cleaning, or choose cleaning from the front panel.
Posted on Feb 15, 2010
SOURCE: MP560 Canon Printer Error 6C10
The above suggestion worked short term, but in about a couple of hours, I'd get the same old error code again. Finally, I found a solution that worked for my MX860 on fixya.com written by "pineworks". The link is as follows: http://www.fixya.com/support/t4097826-aborber_full_error_message
Don't know if you've found an answer to this problem yet, but I had the same issue for about three months. Finally, I found a solution that worked for my MX860 on fixya.com written by "pineworks". The link is as follows: http://www.fixya.com/support/t4097826-aborber_full_error_message
For months, I've had to power off, disconnect from computer, and power on again to kick-start the printing. It was driving me crazy. So far, "pineworks" solution has been a permanent one. Been about a week and have had no problems yet.
Posted on Apr 14, 2010
This just happened with my MX860. I pushed the "Stop" button on the far right of the control panel and held until it beeped. Appears to do some kind of a reset. After that, the U163 error was cleared and it printed again. Don't know how long it will go before that happens again but it is working for now. Hope this helps.
Posted on Apr 27, 2010
Tips for a great answer:
Jul 22, 2014 | Canon Pixma MX360 Printer
Jul 03, 2014 | Canon PIXMA MP560 CLR INKJET P/S/C/F FB WL...
Sep 16, 2011 | Canon PIXMA MX310 All-In-One Printer
Jul 05, 2011 | Canon PIXMA MX310 All-In-One Printer
Sep 30, 2017 | Canon MP560 All-In-One InkJet Printer
Apr 26, 2010 | Canon PIXMA MX860 OFFICE AIO-2.5IN LCD...
Sep 27, 2009 | Canon PIXMA MP530 All-In-One InkJet...
Sep 24, 2016 | Canon MP560 All-In-One InkJet Printer
818 people viewed this question
Usually answered in minutes!