Question about Konica Minolta PagePro 1350W Laser Printer

1 Answer

I may have a piece of paper stuck in the innards of the Konica minolta 1350

The green light goes on but when I try to print - it gives me an error message. I've taken it in to a computer show and they just advised I buy another - tech repair costs are way too high for a $100 printer. Any suggestions. I've always had feeder problems with this printer, but worked around it.
Thanks,

David

Posted by on

  • vanman27 Feb 01, 2009

    Hi Yooperbud,

    Thanks for that suggestion. I did try that a while ago and unfortunately, it didn't work. There may be something wrong with the electronics, since I set u the printer again and it gave me error messages saying there was not a genuine Konica-Minolta cartridge in there, though it was almost brand new. I tried two more that I have and finally, another brand new one worked without the error message.

    But the paper jam message reoccurred. I contacted K-M in the US for a fix, requesting a repair manual, since the retailers in Canada no longer sell the brand, as of six months ago. Ah - technology!

    I live in hope I can get it going, but I always had trouble with the paper feed - a perennial problem with just about any printer, it seems.

    Thanks for your response.

    David


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 I suggest you get a sheet of Card Stock (Heavy paper) and place it in the feed way. Then press the print button applying a slight amount of pressure on the Card Stock so it will feed through the printer. The reason for this, is in some cases I have been able to clear the paper track of debris that was deposited there over time.
Worth a try, as I have fixed a number of printers this way, saving costly repairs.
Hope this helps. Bud

Posted on Jan 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Konica Minolta Pagepro 1350 page count or Print Config sheet?


please go printer utilty option on your pc then you can print a testpage

Feb 10, 2010 | Konica Minolta PagePro 1350W Laser Printer

1 Answer

Konica Minolta 1350 printer won't print with Vista


Also try turning spooler OFF/ON. Also, try turning 1350 OFF/ON. Those sometimes work. But 1350 had same problem with W98SE so must be a problem in 1350 software(?). I got so tired of this that I bought a Canon MFC which works perfectly. Still use 1350 to use up the toner.

Sep 15, 2009 | Konica Minolta PagePro 1350W Laser Printer

1 Answer

LOve my printer.BUT...the light goes to error as paper jam


Start the Konica Minolta Status application and check the error, you should get more info there.

Apr 02, 2009 | Konica Minolta magicolor 2400 Laser...

2 Answers

Konica minolta pagepro 1400w paper jam


have you tear the paper when removing? there is a small paper left still inside the paper path. open the back side and the top part and check for small paper. I hope that will solve your problem and if think the problem still there the problem is one of the paper sensor actuator is broken or out of place.

Feb 04, 2009 | Konica Minolta PagePro 1350W Laser Printer

1 Answer

Error light flashed when trying to print with Magicolor 2400W


Start the Konica Minolta Status application and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Jan 20, 2009 | Konica Minolta magicolor 2400 Laser...

2 Answers

Konica Minolta 2490MF - Paper size error


Need to set A4 size default on the printer driver itself.
Go to Printers and Faxes / Konica Minolta 2490MF right click/ Printing preferences /
Create a "Easy Set" with a new name. Set all paper sizes to A4. Save the new settings to the new Easy Set.
Click apply.

should be o.k.

Jan 13, 2009 | Konica Minolta magicolor 2490MF Laser...

1 Answer

Does not print


eratliff, As someone mentioned on one of my last responses "have you checked to see if the rollers roll. Using latex/rubber glove make sure the rollers are moving." What was the last thing the printer did before it wouldn't print? Was there a paper jam? or even just a small piece of paper stuck in the rollers. Have you uninstalled all the printer drivers and make sure any copies of the printer is deleted from printer properties. Go to this site: http://printer.konicaminolta.com/support/current_printers/pp1350w_sup.htm#drivers and download and install the latest and greatest drivers. Also make sure your machine is up to date. Otherwise you may need ot take it in or... Good Luck Tim

Feb 01, 2007 | Konica Minolta PagePro 1350W Laser Printer

Not finding what you are looking for?
Konica Minolta PagePro 1350W Laser Printer Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5729 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

333 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...