Question about Sabrent USB to Serial (9-pin) DB-9 RS-232 Adapter 6ft Cable (SBTUSC6K) Serial Adapter

1 Answer

Driver needed I lost my disc and need a driver for downloading off of internet can you please guide me? Sabrent 1 Ft USB 2.0 to Serial DB9 Male RS-232 Cable Adapter

Posted by on

  • garyhansen2 Jan 15, 2009

    I fixed my own problem by finding the lost disc. Thanks to me.....

  • Anonymous Jan 15, 2009

    need to download driver

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found my disc. Problem solved. Thanks for follow-up.

Posted on Jan 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Drivers disc is cracked. can I download the


Please download http://www.sabrent.com/drivers/USB-AVCPT-New.zip to a location you can easily find later (DESKTOP is a good location so you can delete the folder after installation)

At this point you can update the drivers manually...
1. Right-Click on MY COMPUTER, Select PROPERTIES.
2. Select HARDWARE
3. Select DEVICE MANAGER
4. Scroll down to the USB Video adapter.
5. Right Click on the Device and select UPDATE DRIVER.
6. Do NOT allow Windows to automatically find the drivers.
7. BROWSE to the Folder you created at the beginning and direct it to the correct folder for your operating system. STK1150 should appear.

Dec 16, 2009 | Sabrent USB-AVCPT Video Capture

1 Answer

My adapter DB9 FEMALE TO DB25 FEMALE doesnt allow me to see my Printer


Are you tring to run a parallel printer from a serial port? If so then it will not work at all. You would need a serial to prallel adaptor that also has the software drivers needed to convert the signal.

Jun 13, 2009 | Parallel 25 Foot DB9 Female to DB25 Male...

1 Answer

I need sabrent usb to serial converter drivers.The disk I received with my parches does not load!?


Try searching the following page
http://www.sabrent.com/#itemName=&itemID=0&section=Drivers

Feb 20, 2009 | Sabrent USB to Serial (9-pin) DB-9 RS-232...

1 Answer

Rj45 male to db9 male cable for ups


If you have a BackUPS CS, you are probably either using it with the USB cable that is supplied or with the 940-0128A supplied by APC, which permits running the UPS in dumb mode. By building your own cable, you can now run the BackUPS CS models (and perhaps also the ES models) using smart signalling and have all the same information that is available as running it in USB mode.
The jack in the UPS may be easily use a 8 pin RJ45 connector. It is easy to construct the cable by cutting off one end of a standard RJ45-8 ethernet cable and wiring the other end (three wires) into a standard DB9F female serial port connector.
PC Signal PC pin UPS Pin UPS signal RxD 2 2 TxD TxD 3 8 RxD GND 5 7 Ground FG Shield 4 Frame Ground Though these UPSes are USB UPSes, APC supplies a serial cable (typically with a green DB9 F connector) that has 940-0128A stamped into one side of the plastic serial port connector.
Here is suggested scheme of original 940-0128A cable
APC Part# - 940-0128A computer --------- Inside the Connector--------- UPS DB9-F | | RJ45 pin - signal | | Pin - Color | | 4 DSR ->|---+ | | | diode resistor | 6 DTR ->|---+---->|----///---o kill power | 8 Orange | | 1 DCD <-|----+ | | | | 2 RxD <-|----+----------------+--o low battery| 3 Brown | | | 7 RTS ->|----------+--///--+ | | | | | +--///--+ | | | | 8 RI <-|----+----------------+--o on battery | 2 Black | | | 9 CTS <-|----+ | | signal | 5 GND --|-----------------------o ground | 7 Red | | 3 TxD | | | chassis | Chassis/GND |-----------------------o ground | 4 Black | | | Not connected | 1, 5, 6, 9, 10 --------------------------------------

Sep 30, 2008 | Digi (76000200)

2 Answers

What is the right rs232 cable to connect a Denon 3808CI reciever and a Phillips RFX9600 serial extender


OK LOOKING AT THE SPECS FOR THE EXTENDER YOU DO NOT NEED TO WORRY ABOUT THE SERIAL CONNECTIONS, WHEN USING THE SERIAL CONNECTIONS YOU NEED RS232 CODE STRINGS TO CONTROL THE DENON OR ANYOTHER DEVICE THROUGH THIS EXTENDER USING THE RS232 CONNECTIONS.
IT LOOKS LIKE YOU CONNECT AN I/R EMITTER FROM AN MINI JACK I/R CONTROL PORT ON THE BACK AND THE OTHER END TO THE I/R WINDOW ON THE DENON

Feb 27, 2008 | Denon AVR 3808Ci Receiver

1 Answer

SBT-PCA4 sabrent pcmcia to usb 2.0


Please provide more information. OS, what exactly happens, do the drivers show up in the device manager? Do you have local admin rights?

Aug 03, 2007 | Sabrent SBT-PCA4 (SBTPCA4) Serial Adapter

Not finding what you are looking for?
Sabrent USB to Serial (9-pin) DB-9 RS-232 Adapter 6ft Cable (SBTUSC6K) Serial Adapter Logo

909 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sabrent Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

vimal
vimal

Level 3 Expert

340 Answers

Avishek Samaddar
Avishek Samaddar

Level 3 Expert

639 Answers

Are you a Sabrent Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...