Question about Hotpoint Ultima WF860 Front Load Washer

2 Answers

WD865 Hotpoint - F-05 error

When the wash is on rinse cycle the screen comes up with F-05 and the cycle stops. Could someone please tell me what the problem is and how to fix it? I've tried cancelling the cycle and then opening the door but it's full of water. I have a WD865 Hotpoint

Posted by on

  • vicky-65 Jan 12, 2009

    when my hotponit ulitma hits the rinse cycle it goes to f05 and stop then i have to do a complete rinse spin cycle all over again

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hotpoint Master
  • 3,463 Answers

F05 means that the pressure switch is jammed on full.
You need to check the pump is pumping out o/k, and if there is a filter, check and clean.

Posted on Jan 11, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Error code f05 means your pump or pipe is blocked. i've just had this problem but fixed it myself. i went on youtube for a video on how to fix this it was spot on

Posted on Mar 15, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint washing machine wf640 there isn't any water coming through when the rinse cycle is on


could be the filter at the water input location in the back of the machine. Or the screen filter at the spigot-end of the input hose....check both hot and cold. First, turn both hot and cold water off at the wall outlet.

Jan 21, 2015 | Hotpoint Washing Machines

1 Answer

Hotpoint aquarious 1200, not completing a washing cycle


where does it come to a stop
five mins in to progam or at rinse

Jan 13, 2014 | Washing Machines

1 Answer

I have a Hoover H160i that is coming up with E05 error. Any ideas?


Thank you. I ran a 2 and 3 wash (60 and 40 degree wash). It allowed me to put it onto a rinse/spin/cycle but it didn't allow the wash.

Nov 28, 2012 | Hoover H160I Front Load Washer

3 Answers

Hotpoint Ultima WD865. Showing Error Code F-18. Please advise.


hi, i turned on my wd865 machine and it starts fine and sounds the same but its displayinf f 18. but it doesnt continue the wash in the usual way . what does f18 mean ? please help :)

Mar 21, 2010 | Hotpoint Washing Machines

1 Answer

Error Code F-05


Error code F05 denotes pressure switch jammed on full.
Remove lower rear cover of washer.
Remove large black hose on bottom of drum.
Remove and clean filter inside hose.
Refit back and test.
Please rate my solution.
Thgankyou.

Feb 04, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Cycle ctopped and is flashing f 05


F05 means pressure jammed on full.
Check pump for blockage, or filter if waher has one.
Please rate my solution.
Thanks.

Jun 21, 2009 | Hotpoint Ultima WF865 Front Load Washer

2 Answers

Flashing f - 05


Error f05 is a problem with the pressure system usually caused by a blockage. These are most commonly found in the pipe which is attached to the bottom of the drum.
Take off the access plate at the back of your machine and you can see it is secured by a large jubilee type clip.
Please be aware that there will be water in this pipe.
Hope this helps & thankyou for using Fixya.

Jan 24, 2009 | Hotpoint Ariston Aquarius WD420 Front Load...

1 Answer

Washer dryer wont stop running


unplug the machine for 3 mins and plaug back in if it still happens you might have a problem with the heating element or somthing.hope this helps.

Jan 02, 2009 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Hotpoint wd865 dryer stopped working


I always start at the plug to make sure it has 220, a dryer will run but no heat with 110. This was a common problem when everyone used fuses instead of breakers, just an old habit.

Then I check the heating element and thermostats, this must be done with an OHM meter. More than likely it will one of these.

Dec 23, 2008 | Hotpoint Ultima WF865 Front Load Washer

1 Answer

Hotpoint Washer Dryer WD865 - Dryer Problems


thermister blown or thermal fuse which is a black plug in the top of the dryer box or yellow sleeved wire, if it was noisy maybe the fan has come loose from it's motor. you will need to remove the dryer box on top of the drum to see if the fan is binding. you can push it back to where its not binding and tighten the nut-ANTICLOCKWISE, LEFT HAND THREAD.
usually the machine runs through a check before starting a cycle and will see an f13 and not start even a wash., so you will need to replace the blown parts.

Oct 25, 2008 | Hotpoint Ultima WF865 Front Load Washer

Not finding what you are looking for?
Hotpoint Ultima WF860 Front Load Washer Logo

1,502 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...