Question about RCA F32632SB 32" TV

1 Answer

Off and on

Turns on and off intermittenly

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 203 Answers
Re: off and on

Sounds like bad switches on the front panel....or could be a micro issue.

Posted on Jun 08, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Power light blinks on / off slowly. No sound or picture. This problem is intermitten. Flexing the main board makes it come on and off.

that is look like you have a bad soldering in the main power circuit and higvoltage circuit HORIZONTAL OUT PUT TRANSISTOR ?/use a magnifier to check for cracked solder you probly find some one...
hope that help

Mar 31, 2010 | Toshiba CZ36V61 TV

1 Answer

32pw6515 32'' philips crt no sound or intermitten sound

if the jack out side works okay, that indicates that the pre amp is fine. the sound on the pre amp is tapped before the main amplifier.
check the main amplifier ic in side if it is getting hot.
you need to charge that ic.

Oct 24, 2009 | Philips 32PW6506 32" TV

1 Answer

I have a Sony FD Trinitron WEGA - KV-34XBR800.

Most common will be intermitten won't turn on. This is a failure in the power supply,
The second is trouble with the Qbox or Cable card circuit. You don't wan't this one it's costly!

Apr 10, 2009 | Sony FD Trinitron WEGA KV-32FS100 32" TV

1 Answer

RCA Scenium 44" HD44LPW62

it does not sound good take it to tv shop intermitten shut down or dead sorry

Apr 03, 2009 | RCA Scenium D34W20 34" TV

1 Answer

Model #

The solder joints on the CRT board might have cracked and cause this symptom. What you are describing indicates that the red gun is intermitten, and the solder joints on the CRT socket itself (red cathode) or the red output transistor have probably cracked loose.

Aug 23, 2008 | Sanyo HT32744 32" TV

1 Answer

Flashing Screen

ok, the problem you may be having is bad solder connections on the vertical deflection IC. resolder them or have a tech do it. also check for bad solder on the 9 volt regulater IC as well. these problems are common to older sony sets.

Feb 29, 2008 | Sony FD Trinitron WEGA KV-32FS100 32" TV

1 Answer

Diagonal lines across picture

do you have a dvd or vcr hooked up to this? Is it hooked up with the a/v cables (yellow, red and white). double check the cable hookup make sure audio cord is not in the video jack, from what you are saying this will do that if it is. Also there is a capacitor on the main board believe it to be C3412 which intermittenly gives horz. lines but haven't had a audio tone with that.

Nov 29, 2007 | Zenith B25A76R 25" TV

1 Answer

TV shuts off by itself in full picture mode

The Sony sets are full of circuits which monitor and detect faults throughout the set. These circuits monitor main B+ voltage and current, low B+ voltage and current, vertical and horizontal circuits and CRT current. Finding an intermitten problem in these circuits is no easy task and should be left to someone with experience in Sony sets.

Jun 28, 2007 | Sony KV-36XBR400 36" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66352 Answers

John mullen

Level 2 Expert

229 Answers


Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides