Question about SMC Barricade g SMCWBR14T-G Wireless Router (SMCWBR14TG)

1 Answer

WLAN does not work

Hello there.. i was told that if my wireless is working the WLAN lights will blink, but mine doesnt.. it was working properly yesterday, but when i turned on my laptop again, no connection from my router can be found.. i tried to connect to network but my laptop can't find the router.. im using windows vista.. the LAN, and WAN lights are blinking.. but the WLAN lights doesn't.. what should i do? please help :(

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 310 Answers

Can you try and reset the router once. I guess that should help . There should be a reset button behind the router and the reset procedure should be present in the manual

Posted on Jun 16, 2009

1 Suggested Answer

compucure
  • 61 Answers

SOURCE: Laptop can't see my network

It does sound like you may need to upgrade firmware. Not sure what router you have but you can download firmware & install from the router's website.

You might like to try:

1. Disable Windows Firewall

2. In Internet Options Control Panel go to the connection tab and then the LAN Settings where you can uncheck the "Automatically detect settings" button.

3. If you have any third party software, I would get rid of this and ensure that the"Windows Zero Configuration" in the Services menu is set to "Automatic" and the status is started.

Interestingly, Anti Virus programs sometimes interfere with wireless set up - you could see if it helps by disabling it whilst configuring your wireless. It might also be worth trying to connect without any encryption code & see if that will connect - you can then sort out the encryption.



Posted on Mar 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Status and WLAN lights only blink


DI-624 is a bit old and mine has failed from overheating on occasion. Check that it is not in direct sunlight. If it is hot to the touch, see if it works after cooling off a bit. I had a client who had no problems for five months, until spring. One day his wifi crapped out every time the sun came out and it took me forever to figure that one out.

Sep 15, 2010 | D-Link AirPlus Xtreme G DI-624 Wireless...

1 Answer

Should the status light be blinking?


you should call the wireless manager.
good luck.

Jul 26, 2010 | D-Link Dlink DI-514 Air Wireless 2.4 GHz...

1 Answer

My linksys wrt160n wireless router light is blinking


Welcome to FixYa
Indication of Router Lights:
  • Power light blinks. If LAN or WAN cable is plugged in, their respective lights will flash on activity.
  • Power light turns off for several seconds.
  • All lights, except power light, turn on and then off.
  • Power light blinks slowly, then faster, and WLAN light will turn on.
  • Once Power light and WLAN light are on solid, the router is fully rebooted.

A working router should show solid green power light. upgrade the firmware of the router.
If this Helped you-Rate me..Thanks for Using FixYa

Jun 30, 2010 | Linksys WRT160N Wireless Router

1 Answer

TEW-432BRP Wireless Router (TEW432BRP): i was playing on my laptop when the routers wirele...


seems like it got stuck in service mode; you should try to rewrite/update firmware (as provided by the manufacturer's site)

May 17, 2010 | Trendware TEW-432BRP Wireless Router...

1 Answer

Hi, I have a dlink DSL-G604T router, wlan light not on.


Hello there!

Only thing that can cause your wlan light not working consistantly or with some blinks (which is normal thing) is bad lan cable which leads from your ADSL modem to your wlan entrance on your wireless router, please check that cable in order to fix that problem. Cable doesnt need to be coaxial so it can have 2 different lan sets (2 poles of exits male and female exit). Thats it ! =)

Please rate solution! =)

Sincerely
Aleksandar Adzic

Apr 15, 2010 | Routers

2 Answers

My wlan light keep going on and off on my wrt54g


Also check if the power light on your router is blinking. If it is blinking, that's an indication of hardware failure. To revive it, do a hard reset. Press and hold the power button of the router for 30 seconds then unplug the power. Wait for 30 seconds again before you plug it back in.

Oct 27, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

DI-524 version D router problems


you need to open the configuration of the router. Read the manual in order to access on configuration. Once you access .. you can manually configure the router, and set what do you want.

Jul 27, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Wireless-G Broadband Router


The WLAN light will normally blink if there is data passing through. Most often if the problem is that you need a reboot for the router to work again you will need to update the firmware of your router. You need to go to www.linksys.com then click on the top right search then look for your model number then select the option to WRT54G downloads. Search for your model and then download the firmware. After that on a computer wired to your router go to http://192.168.1.1 through Internet Explorer. Click on the administration tab then click Choose. Select the file that you downloaded then click on Upgrade. That should fix your problem.

Jul 21, 2008 | Linksys Wireless-G Broadband Router

2 Answers

Router not being recongized


if your running windows xp then you should remove any programs that you installed to run router then look into hardware manager and uninstall router and restart computer . then try once again plug in router once comp boots and let win xp load the correct drivers if this doesnt work go to windows update website and get all available updates including all hardware updated then try installing again good luck with it

Jul 13, 2008 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Router not working, help please!


You may may need to configure your D-Link to use your type of internet! Try following the Quick Install Guide which can be found here: ftp://ftp.dlink.com/Gateway/di524/Manual/DI-524_manual_06292005.zip The WLAN light doesn't come on probably because you have the wireless disabled, which can be re-enabled once in the configuration for the wireless(in the document mentioned above) If you are having any difficulty following the guide or have folloed the guid and still can't connect, please get back to me regards, babb

May 14, 2007 | D-Link AirPlus DI-524 Wireless Router

Not finding what you are looking for?
SMC Barricade g SMCWBR14T-G Wireless Router (SMCWBR14TG) Logo

Related Topics:

999 people viewed this question

Ask a Question

Usually answered in minutes!

Top SMC Routers Experts

Ali Reza

Level 1 Expert

37 Answers

vimal
vimal

Level 3 Expert

328 Answers

Ngoro
Ngoro

Level 3 Expert

1111 Answers

Are you a SMC Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...