Question about Thermador Pro Grand PRG366EG (Gas) Stainless Steel Range

1 Answer

WHHER IS THE IGNITER FOR BAKING ON PRG366EG - Thermador Pro Grand PRG366EG (Gas) Stainless Steel Range

Posted by on

  • 9 more comments 
  • ben kohen Dec 04, 2012

    the baking igniter in my oven is not the same as the parts on the pro parts

  • ben kohen Dec 04, 2012

    it is only with one wire

  • Richard Roth
    Richard Roth Dec 04, 2012

    Is your model number PRG366EG?

  • ben kohen Dec 04, 2012

    YES IT IS PRG366EG/04

  • Richard Roth
    Richard Roth Dec 04, 2012

    Here is the complete parts list for that model.http://bit.ly/R4clCj

  • ben kohen Dec 04, 2012

    I DONT SEE THE IGNITER THATT IS ON THE BUTTOM OF MY OVEN CAN YOU TEL ME WHICH ONE I SHULD GOSE

  • Richard Roth
    Richard Roth Dec 04, 2012

    I would ge the one that the parts list calls for.http://bit.ly/XmIoif The supplier has a 365 day, any part, any reason return policy so you can't go wrong ordering it.

  • ben kohen Dec 04, 2012

    but the one that i have in my oven is with one wire

  • ben kohen Dec 05, 2012

    i just find out that i have spark electrode on the buttom it is not egnitor

  • ben kohen Dec 05, 2012

    this spark electrode only with one wire

  • ben kohen Dec 05, 2012

    it is installed in the buttom of the oven is this the igniter for the beking? in the oven on the top ther is 2 igniter its for the greel the to light up and the greel is working

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Thermador Master
  • 9,472 Answers

The igniter is number 14 on this diagram.

Posted on Dec 02, 2012

  • ben kohen Dec 03, 2012

    is this igniter # 14 becom hot and red or just genrate a spark?

  • Richard Roth
    Richard Roth Dec 03, 2012

    It should glow and get hot.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oven no spark


Does the igniter glow white hot and try to lite? If not, replace the igniter, here is the part to order.

Keep me posted!

Dec 27, 2013 | Thermador Pro Grand PRG366EG (Gas)...

1 Answer

Natural gas oven won't get hot and stay hot


Most likely the oven igniter has failed. Turn the unit to bake, the gas should come on within 35 to 60 seconds (at the most). If not, replace the bake igniter. DO NOT TOUCH THE BLACK PORTION OF THE IGNITER with your fingers, this is true for old and new.

Nov 19, 2012 | Magic Chef CGR3742 Gas Kitchen Range

1 Answer

Baking igniter starts but willnot stay on for baking


Hello,


The problem beleive it or not is that the bake igniter is weak ,and it is not drawing the proper amprage to open the gas valve.If you have a amp meter access the wires to the bake igniter(usually behind the storage drawer) and check for 3.3-3.6 amps when oven is set to bake by clamping the meter around ONE wire wire of igniter make sure only one wire,either one and not both.
if amp draw less than 3.3-3.6 amps replace bake igniter. I know it seems improbable that if the igniter comes on that it could be the problem.Professional appliance technicians who would charge a average of $250.00 to repair your oven,have found when the igniter comes on yet the oven won't heat that a weak igniter is the cause 100% of the time
Gene...OldTech2332

Aug 22, 2011 | Whirlpool Kitchen Ranges

1 Answer

I have a GS773LXSQ O modle Gas range that is a little ove 4 years old. After baking a pumpkin pie on Thanksgiving, I wanted to broil the crust. The broiler would not come on and after turning off the oven...


If it is only 4 years old then yes it has electronic ignition and you should hear a clicking as the oven electronic igniter starts. If not the igniter module is most likely defective. Contact this website (at the link) for repair help and parts. Appliance Parts Accessories Repair Help

May 17, 2017 | Whirlpool Kitchen Ranges

1 Answer

OVEN WONT WORK


Even though the igniter is red, if you are not getting gas it is almost 100% sure that the igniter is simply not getting hot enough. A new igniter should get that valve to open and you will be baking like crazy.

Nov 30, 2009 | Maytag CWG3100A Gas Single Oven

1 Answer

Oven won't stay hot


You probably need to replace the baking igniter, (Igniter,bake burner
Part Number: AP4102011 made by MAYTAG

Feb 12, 2009 | Maytag MER6772 Gemini Electric Kitchen...

3 Answers

Bosch HGS442UC Gas Oven won't light


Usually when an oven won't bake, it's because the bake igniter is weak or burned out. The igniter is a small, round or rectangular device, that's about 1 inch by 4 to 8 inches. It's near the burner itself.

The burner is the tube-type device the gas flows through before it's ignited. It has many small holes on the sides to let the gas, when ignited, form a long, low flame. If the igniter is weak, if it glows red but doesn't get hot enough, or if it's burned out, the gas doesn't flow to the burner and the burner won't ignite. If this is the problem, you may need to replace either the igniter or the gas safety valve. Usually the igniter is to blame.

Other causes Other reasons that your oven may not bake are:

  • The clock settings are incorrect (if you have timed baking or a self-cleaning oven).

  • The thermostat is defective.

  • The safety valve that prevents accidental gas flow is defective.

  • The selector switch is defective.
if this helps please vote me a fix ya

Jul 18, 2008 | Bosch HGS442UC Gas Kitchen Range

Not finding what you are looking for?

Open Questions:

See all Thermador Pro Grand PRG366EG (Gas) Stainless Steel Questions

Thermador Pro Grand PRG366EG (Gas) Stainless Steel Range Logo

Related Topics:

361 people viewed this question

Ask a Question

Usually answered in minutes!

Top Thermador Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

butch welch

Level 2 Expert

147 Answers

Are you a Thermador Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...