Question about General Electric Washing Machines

Open Question

MODEL GTWN4250M1WS REMOVE AGITATOR

HOW TO REMOVE AGITATOR HAVE A LONG STRING WRAPPED AROUND AGITATOR

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1073 Answers

SOURCE: MAYTAG TOP LOAD WASHER MODEL

remove the fabric despenser from the top of the agatator, under the despenser is a 1/2 inch bolt, a ratche with a 6 inch extention works well, remove the bolt and the agatator will lift up off the transmission shaft

Posted on Apr 12, 2008

shaggyrat
  • 1224 Answers

SOURCE: Series 70 prob: Recently started wrapping clothes around agitator

some fabrics are known to do that you have on wrong cycle setting there should be a setting for delicates and clothing and blankets and things when loaded to close to agitator will attract each other together so its wise when loading machine load in a circle leveled out till desired fullness away from agitator they shouldnt attract as much

Posted on May 07, 2008

Maytag317
  • 1136 Answers

SOURCE: agitator making clicking noise when washing clothes; clothes wrapping around agitator

Hi,
If this a whirlpool brand washer, there are sone parts bad in the agitator it's self. These parts are called dogs and they make the agitator rachet so that the top half only goes one direction. Does this sound like what you are experiencing? If so, let me know and I can assist you further.

Thanks
Vic

Posted on May 13, 2009

TheMobilian
  • 8220 Answers

SOURCE: Kenmore 90 tub spins excessively clockwise during wash cycle.

Improperly installed thrust bearing kit. Too many washers cause the basket to spin during agitation.

Posted on Jan 04, 2010

Testimonial: "Where is the "thrust bearing kit" and how can it be installed properly?"

  • 1 Answer

SOURCE: Need to remove agitator as material jammed underneath

remove agitator as material iammed

Posted on Apr 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I remove clothing wrapped around bottom of agitator?


Try to pull out with pliers or Vice gip. May need to unwind around the agitator.

Jul 27, 2014 | GE GTWN3000MWS Washer

1 Answer

String wrapped around shaft


i would remove the trimmer head then cut the string off

Aug 08, 2012 | Garden

9 Answers

Imaginext batcave elevator string came out


I had the same issue, my son used his all of half a day and the elevator stopped working. If you take the top of the cave off, and unscrew it from the elevator shaft you will see a black wheel. The string needs to be wrapped around this twice, there should be very little play in the string. What I had to do was take out the 3 screws that held it to the knob on top, then wrap the string back around the wheel making sure not to tangle the string more. once the string is wrapped 2 times you can reassemble.

Dec 18, 2011 | Toys

1 Answer

Tie wrapped around the agitator. How to remove to agitator? model 267A3088P405


could not find the model number but this link may help you
http://www.wikihow.com/Remove-a-Stuck-GE-Washer-Agitator

May 27, 2011 | General Electric Washing Machines

1 Answer

Agitator unit on Kenmore Progressive 116.25915503 won't spin. I have cleaned out all hair and string wrapped around it. Belt is good. It seems to spin on one side but stuck on the other. Could string be...


Pry the end caps off the brush bar, you will find hair and string wrapped up tight in the end. the bearing may also be shot, you can try and oil it up a bit to keep it spinning. <!-- from fixya rte -->

Oct 21, 2009 | Kenmore Vacuums

2 Answers

Adgitator removal


Just follow these steps:

1. Remove the center dispenser from the top of the agitator. It should just pop off.
2. Locate the white plastic cap underneath and pull straight up to remove.
3. Locate the agitator bolt underneath and remove using a socket and ratchet (can't remember the size). Hold the agitator still with one hand in order to loosen the bolt.
4. With the bolt removed, grasp the agitator by the bottom flanges and pull straight up. It should lift off the center post.

NOTE: Sometimes these agitators will stick due to years of detergent accumulation. You may have to wobble it back and forth to get it loose.

If you have questions, please let me know. I hope this helps you.

May 03, 2009 | Frigidaire Gallery GLWS1339EC Top Load...

1 Answer

A sweatshirt cord is wrapped around my HotPoint top load washing machine. The machine is 18 years old. Can I pull off the agitator to retreive the string?


If it's wrapped around up underneath the agitator you can.

Have you tried just figuring out which way it was wrapped?

Keep a can of WD-40 handy.

Jan 29, 2009 | Hotpoint VBXR1090B Top Load Washer

1 Answer

Agitator Dogs tangle clothes


No - The clothes will not agitate properly.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jan 07, 2009 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top General Electric Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Paul Bade

Level 3 Expert

1516 Answers

Are you a General Electric Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...