- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi. Thanks for your question. For assistance on intercode on TGS dashboard you can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!
You probably have a slow internet connection. It is recommended that you have a minimum 25/25 Mbps connection from your provider. If you do then the streaming stick might be too far from your wireless router. Try to move the router closer to the Streaming Stick if possible. The best way to watch streaming video is with a wired ethernet connection with a Roku 3 or other wired device. Good Luck!
If this Answer goes some way towards helping to resolve
your Query, Problem or Fault, please take the time to Rate it. This helps Answerers,
like me, better understand the needs and the point of view of Askers, like you,
and guides us in exploring the best ways to provide the most comprehensive,
useful and high quality Responses and Solutions we can.
If you need further
help, please do not hesitate to post another Question or add a Comment to this
a serial port is a 9 pin (DB-9) connector for serial communication (RS232) used by modems, mouse, etc... In older machines you had a DB-25 (25 pin connector) as well usually situated in the back of the computer near the printer port (DB-25 connector) but femail (25 holes insdead of 25 pins)
This is in the wrong category, as this is a mixer and not a motherboard. Regardless, it sounds like the mixer needs a form of digital media and it is not finding one. If there is a device that seems to be connected, you may want to double check that the cables are connected correctly and are in good shape. If this is not the problem and everything else seems to be in order, there may be a problem with the mixer and I would probably contact Numark.
Hi superdarien, you can click on this link for a little help with installing a motherboard. http://www.hardwaresecrets.com/article/145
Connecting power from the power supply to the motherboard.
There are a few connections from the PSU to motherboard & they are important. Please open you're motherboard manual to page 11 & 12.
The letters M & T are the two most important connections. M is a 4-pin ATX_12volt plug. It can only be connected one way. There is a small plastic locking clip on the connector. Letter T is the main power connector. It as well can only be connected (one way). There is also a locking clip. (Plastic). Look at the 24 pin connector on the board. http://www.brainbell.com/tutors/A+/Hardware/Power_Supply_Connectors.htm
You do not need to be a geek to hook this stuff up. You're manual will help you more than you think. Bouncing from page to page is the hardest thing to do. When you come across terms you do not understand type the term into a google search. This will help.
Your motherboard does in fact have special connectors just for these internal USB ports. These are often called "USB headers".
Based on the manual for the board (which can be found here [LINK]), two of these are located on the bottom edge of the board, below the three PCI slots. These are labeled "USB78" and "USB56" and have nine pins in them, which should match the connector that leads to your case's USB ports. Use of these ports is described in detail on Page "1-25" of the manual and I'd strongly recommend reading through this section to verify that things match up properly.
ok, for what I understand you changed your motherboard, tried to boot your old windows and it went bananas on you. Wich is really not uncommon. Then you tried installing windows and your keyboard would not do anything. As far as the keyboard issue goes, I am guessing that you use a USB keyboard. Windows is such a wonderful piece of software that it's no surprise it acts up like that. Try enabling USB Keyboard support in the BIOS, or better yet, try connecting a PS2 keyboard (the round plug). Chances are everything is gonna be just fine after that.