Question about Sony KDS-R60XBR1 60" Projection HDTV

1 Answer

Sony KDS60A200 won't turn on

My Sony KDS60A200 lamp light was flashing. I changed the lamp and the TV is still not working, the lamp was no good though. Now the power light is flashing with a red light 3 times and repeat. I hear a click in the back of the TV as if the fan is trying to start, every time I press the power button. The fan isn't working, but since the TV hasn't been on, why should the fan be on? I don't know if the fan is the problem. This TV is only 2 yrs old and it cost more than 3K.

Posted by on

  • 2 more comments 
  • lashb1 Jan 11, 2009

    Thanks I'll see what happens.

  • lashb1 Jan 20, 2009

    The fan sounds like it wants to start, but something is stopping it like its not getting power. I hear a click and a very short sound where the fan is. But there is no sound or picture. Something is going on....

  • lashb1 Jan 20, 2009

    The fan sounds like it wants to start, but something is stopping it like its not getting power. I hear a click and a very short sound where the fan is. But there is no sound or picture. Something is going on....

  • lashb1 Feb 03, 2009

    it's not the fan. the tv has no power.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 133 Answers

Yes, the 3 blink error code is a defolty fan, you can take the back of the tv off, it will most likelu be the fan that is faceing you on the left side, it is held bu 4 screws, take it out, (1 plug) and blow it off with canned air, or an air compresser, that will buy you a short time, you will need to order a new one on the sony website, sometimes blowing it out wont work, and sometines it will give you around a week

Posted on Jan 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Sony projection tv...Screen blinks on and off to black several times a minute...audio and everything else is fine


It sounds like either the inverter board or lamp are the problem. I would sway more towards the inverter as when the lamps die they normally do it properly.

Jan 13, 2017 | Sony Televison & Video

1 Answer

Sony TV question. Lightning surge, no lights, no picture, fuse is good.I have the model number. looking at back of tv now, cover removed.


YOUR GONNA NEED A NEW TV ITS FRIED IT WHEN ITS STORMING YOURE SUPPOSED TO UNPLUG ALL ELECTRONICS BECAUSE OF THAT ISSUE

Jan 09, 2017 | Sony Televison & Video

1 Answer

My sony wega kf-50E200A tv keeps turning off. during each cycle the green light blinks 42 times and the tv comes on again for about 3 minutes and it happens all over again


More than likely the power supply is defective, but without testing and the repair manual that is just a guess, you make the decision to replace or repair the TV.

Jan 07, 2017 | Sony KF-50E200A TV Lamp with Housing

1 Answer

How to reset lamp timer on panasonic pt-50dl54j


If you wish to get some details; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Jan 07, 2017 | Panasonic Televison & Video

3 Answers

LG 26LH2000 television. Last 2 days when I turned my TV on there was only sound, and black screen.


back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
26359174-wxmxxsggneevie4j1gyznoid-1-0.jpg

Nov 16, 2016 | LG 26LH2000 26 in. HDTV LED TV

1 Answer

Samsung DLP HLS4266W


Check the fittings of the color wheel. Refer this site for more details.
http://electronicshelponline.blogspot.com/

May 17, 2013 | Televison & Video

1 Answer

Would like to know the codes for a LG tv, Sony tv, and a TOSHIBA DVD ?


How to Program


Remotes With SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press "SET" Hold until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


Remotes Without SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press and hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed, at the end of the 4th digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


MAGIC SEARCH FUNCTION
1. The magic search function enables you to scroll through the entire code list one by one by pushing the on/off button. Each time you push the on/off button the remote automatically switches to the next code in the list and sends a signal to the device you have chosen.
2. Choose and press a device key i.e TV. LED will flash once.
3. Press and hold the SET button or if no SET button then hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
4. Enter the 4-digit Device code (refer MAGIC list) i.e TV is 0001.
5. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process.
6. Start scrolling by pushing the ON/OFF button as soon as your TV or Chosen device turns OFF lock the code in by pushing the DEVICE key again.

Mar 27, 2013 | Televison & Video

1 Answer

My alba telly won't turn on it glee ps flashing blue what should I do


Sounds like your power supply inside the unit is bad. What is the make and model?

Mar 11, 2013 | Televison & Video

1 Answer

URC-22B doesn't work with my BEKO tv.


Check with this method. Manually turn on your tv.
Then push and hold the code saerch button until the light stays lighted release the button.
Push and release the device button you want to set TV.
Now you got to push and release the ON/OFF button until your device turn off when your device turn off stop and push and release the enter button for storage the code.
Warning: You may push and release the ON/ OFF button for almost 200 times.
Good luck.














.

Jun 12, 2009 | Televison & Video

Not finding what you are looking for?
Sony KDS-R60XBR1 60" Projection HDTV Logo

Related Topics:

808 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

98766 Answers

The Knight
The Knight

Level 3 Expert

69718 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...