Question about Craftsman 580.752020 1800 psi

1 Answer

New the hose fitting for craftsman 580.752020 pressure washer

I was replacing the power hose onto the reel and stripped the fitting coming from the pipe from the motor. I need replacement parts either OEM or a workaround even eliminating the reel altogether. Any ideas?

Posted by on

  • vincent penrose Dec 02, 2012

    Does anyone have any idea what part number 203961GS (hose clip) looks like. It could be the part that fits on the aluminum part that comes off the high pressure motor outlet that goes to the hose wheel where the hose attaches ( 1/4" npt?) .

  • vincent penrose Dec 04, 2012

    This pressure washer was made in 2008. The transition piece from the high pressure side of the motor through the wheel hose where the replacement hose screws into is what I am looking for. I called Briggs and Stratton. They said they make these units in CHINA to their specs and cannot tell me anything. Nor can they give me the size of the fitting on the high pressure side of the motor though it looks like 3/8th or M22. Can I just put a 3/8th or m22 90 degree here with a 1/4"npt male and call it a day?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 643 Answers
Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Shorten a pressure hose on a a pressure washer


The type of high pressure hose used with a pressure-washer is not designed to be shortened or repaired by the customer or end-user. If the hose has somehow become damaged it will need to be replaced. If your existing hose is the detachable kind and you're wanting to shorten it, I would suggest taking it to someplace where they're in the business a making up hoses & applying the fittings with the proper tools. A good place to start would be either Ace Hardware or Sears Hardware (not a regular Sears store). Either place should be able to do it, or else be able to refer you to someone who can.

Nov 14, 2014 | Garden

1 Answer

Water hose won't come off pressure washer


release pressure by squeezing trigger then grab the brass quick connect fitting at the knurled section (at end of hose) and push it toward the pump. when properly pushed back, the hose connector will pop out.

Aug 11, 2014 | Craftsman 2700 PSI Briggs Stratton...

1 Answer

How do you take the hose reel off on a greenworks 1700 psi pressure washer?


There should be a clip that holds it in place, see link.
http://www.ppe-pressure-washer-parts.com/greenworks-51012-pressure-washer-parts

Jan 12, 2014 | Greenworks 1700 PSI 1.4 GPM Electric...

1 Answer

How to change powerstering pump chevy uplander


I just finished replacing mine.

It is much easier if you do these steps:

1. Remove the serpentine belt.
2. Remove the nuts holding the main fuse box over the battery.
3. Remove the reinforcing bar over the battery.
4. Remove the battery.
5. Remove the windsheild washer tank.
6. Now you have access to remove the pump pulley. Without removing the stuff, it may be possible, but it will be extremely difficult.
7. Remove the pump pulley.
8. Loosen the high pressure hose fitting.
9. Remove the return line clamp.
10. Remove the power steering pump mounting bolts.
11. Remove the high pressure hose fitting.
12. Remove the power steering pump while sliding off the low pressure hose.
13. Remove the clips holding the reservoir on the pump.
14. Remove the reservoir.
15. Install new o-ring on the reservoir.
16. Install reservoir on new pump.
17. Install clips to hold reservoir on pump.
18. Install new o-ring on high pressure fitting.
19. Place new pump in position while sliding on low pressure hose.
20. Loosely attache high pressure fitting.
21. Tighten pump to mounts.
22. Tighten high pressure fitting.
23. Install clamp on low pressure hose.
24. Install power steering pulley.
25. Install washer reservoir.
26. Install battery.
27. Install reinforcing cross member.
28. Install fuse panel.
29. Install serpentine belt.
30. Bleed the power steering system.

Dec 13, 2012 | 2008 Chevrolet Uplander

2 Answers

Replace power steering pump on 06 chevy uplander


I just finished replacing mine.

It is much easier if you do these steps:

1. Remove the serpentine belt.
2. Remove the nuts holding the main fuse box over the battery.
3. Remove the reinforcing bar over the battery.
4. Remove the battery.
5. Remove the windsheild washer tank.
6. Now you have access to remove the pump pulley. Without removing the stuff, it may be possible, but it will be extremely difficult.
7. Remove the pump pulley.
8. Loosen the high pressure hose fitting.
9. Remove the return line clamp.
10. Remove the power steering pump mounting bolts.
11. Remove the high pressure hose fitting.
12. Remove the power steering pump while sliding off the low pressure hose.
13. Remove the clips holding the reservoir on the pump.
14. Remove the reservoir.
15. Install new o-ring on the reservoir.
16. Install reservoir on new pump.
17. Install clips to hold reservoir on pump.
18. Install new o-ring on high pressure fitting.
19. Place new pump in position while sliding on low pressure hose.
20. Loosely attache high pressure fitting.
21. Tighten pump to mounts.
22. Tighten high pressure fitting.
23. Install clamp on low pressure hose.
24. Install power steering pulley.
25. Install washer reservoir.
26. Install battery.
27. Install reinforcing cross member.
28. Install fuse panel.
29. Install serpentine belt.
30. Bleed the power steering system.

Jul 08, 2012 | 2006 Chevrolet Uplander

2 Answers

Water flows thru the pressure washer pump and out of wand, when I start the motor flow stops. I have a craftsman model # 580.752060 I've taken pump apart and there are no obstructions that I can...


Hi,

Let the water run for a longer time. "Walk" the hoses, from the faucet to the pump and then to the nozzle, holding the hoses up to displace any trapped air in the lines through the pump and out the nozzle. What it sounds like is that air is reaching the pump. When it does, it cavitates, and no water can be pumped. Tighten all of your hose fittings securely. Try holding the trigger down while starting the washer. It may be easier with another person helping.
Best regards, --W/D--

Jul 08, 2011 | Craftsman 2500 PSI Briggs Stratton...

1 Answer

Craftsman 3/8 in. x 50 ft. Air Hose Reel, Retractable how to replace hose


Unreel the hose all the way out. Unscrew brass fitting at reel. Screw on new hose with fitting tape. reel up new hose. You're done. Good luck.

Jan 07, 2011 | Suncast Air Hose Reel GCWAR50R

1 Answer

Craftsman Pressure washer will not spray


your not missing anything, check the pump, they tend to go bad over time and may need replacing. The pump provides the pressure as well as the suction for the whole process, pulling water from the hose or tank and pushing it forcefully through the pressure washer line. If the motor is running and you have the water going through the line and to the pump, and no water is coming out, my guess would be the pump.

Sep 24, 2009 | Briggs & Stratton Pressure Washer...

2 Answers

When I connect the water hose to the pressure washer and turn on the water, the hose pops off.


Either the hose connection or the pump connection threads are stripped and will need to be replaced.

Aug 24, 2009 | Black & Decker Garden

4 Answers

Samsung Washing machine fault


I have foud a solution 4E error for my Samsung WD7101CKW. Water that comes inside washer is splitted in splitter with valves. One of these valves has a red label on it - this is a valve with restrictor of flow inside. This restrictor is used to limit flow speed mainly for testing purposes of pressure/water level sensor. Because of that restrictor (red cap with two holes of 0,5 mm diameter) blocked flow too much, after some time washer controller thinks that water has too low pressure.
Unplug washer, disassemble hoses from valves, disassemble valves from the washer (screwdriver needed), drill both holes in red restrictor to 1 mm (use 1 mm drill or just big needle). Assemble in reverse. Will work :)
Greetings - Thomas

Jan 16, 2008 | Samsung WF203ANW Front Load Washer

Not finding what you are looking for?
Craftsman 580.752020 1800 psi Logo

569 people viewed this question

Ask a Question

Usually answered in minutes!

Top Craftsman Garden Experts

Wade Mobley
Wade Mobley

Level 3 Expert

462 Answers

Dean Gruber

Level 2 Expert

110 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Are you a Craftsman Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...