Question about Safety 1st Forerunner 5-Point

1 Answer

Tappan gas wall oven identification question for an older unit

How do I use the serial and model numbers from an old, old Tappan wall oven (gas) to find replacement parts? The identification letters and numbers on the unit are: AZ12-1239-26-13149-8621 6741 GA.

The oven is a dual unit (upper = cooking box, lower = broiler); it uses gas and has an electric starter for the pilot light.

Apparently all new(er) models have a backslash amidst the numbers showing manufacturing date; ours does not - there is not a backslash anywhere. Too, the configuration (grouping) of the numbers on our wall unit -see above- do not seem to conform to any recent standards for identification. When I enter the letters/numbers into "search" for parts on websites, I get the message that there is no such model in their database(s). Most frustrating.

[The metal plate with the serial and model numbers stamped into it is located in the lower left-hand side of the upper space/oven box. It is about 9-inches long and is placed vertical to the oven floor - to the left of the hinge attaching the left bottom of the (upper) door to the unit.]

Any help you could give me in deciphering the numbers so I can order replacement parts would be greatly appreciated. Thanks, Beth.

- - There is also an "x" stamped into the plate - it is at the far end of the plate, at the further end from the other letters/numbers and the same size as the other letters/numbers. Any 'explanation' for it has long since been scrubbed away, so I've no idea what it might mean. Any idea? - -

Posted by on

  • brett72 Jan 14, 2009

    I have the same problem finding parts in database with my Tappan oven that starts with the same numbers as does yours.

    My burners do not ignite and I'm trying to find a manual and or thermostat. Maybe we can get some answers?


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Desperately searching for User Manual for Tappan Wall Oven Model 12-4990-00-04.

Hello Owner, thank you for your inquiry!
I understand that you need the use and care manual for your Tappan wall oven, 12-4990-00-04. If the model is older than ten years old manufacturers will not keep that information available. You might be able to perform a search for antique models online for any additional information. -Matt

Jan 11, 2016 | Frigidaire Ovens

1 Answer

Seal on Tappan wall oven came off, what to do?

Hey friend, I appreciate your post!
I understand that seal on your Tappan wall oven has come off. In order to provide you additional information regarding the seal I would need your model number and serial number. You can locate the serial tag (which has your model number listed) on the front of the oven on the left side. With that information I could provide you additional assistance. I look forward to your response. -Matt

Aug 03, 2014 | Tappan Ovens

1 Answer

On a Tappan wall oven model #12-1263-30/03020 serial #16040288 sometimes the oven lights and sometimes it won't though the pilot light comes on. What might be the problem and what year is it? Thank You

The problem is usually the igniter not reaching the correct amp draw .When the igniter does not reach the correct amp draw it may allow the gas valve to partially open or not open at all. The igniters are inexpensive and easy to replace. There is a video at this will walk you thru the correct procedure for performing this test. It may be a different model but the testing will be the same.You can also enter your model # for diagrams and illustrations of your specific model. Not all models are available. All parts come with installation instructions.

Jun 24, 2010 | Tappan 24 in. Freestanding Gas Range...

1 Answer

I need parts for an older tappan wall oven..model Z12-1449-00 ...a thermostat and thermostat knob

It's going to be hard to look up the old model numbers, but there is a number on the old thermostat that might help.I may possibly have one but have no way to look up the specific model.

Jan 21, 2010 | Ovens

1 Answer

Manual for Tappan Wall oven

I just replaced my springs, the springs are the same as okeefe and merit
i have probably the same oven as you . They have many pictures of all the springs there! mike summers

Apr 05, 2009 | Ovens

3 Answers

Hello, Can't find model/serial number. Older Tappan custom gas stove. Burners work but oven does not. Told it has electric ignition that could be problem. Where to find it, how to remove, where to get...

Serial number labels are usually located in any one of a number of places -

Under the cooktop in one of the corners
Inside the oven door frame (not on the door)
Behind the bottom drawer pullout on the oven, left hand side
Oven back.

If this unit is anything less than 20 years old, there will be a label somewhere.

Reply back you findings and I can give you more information as to how to repair, and we can identify part numbers. You might also try and see if you can drill down through parts when only knowing the manufacturer.

Jan 30, 2009 | Tappan TGF363 Gas Kitchen Range

1 Answer

Tappan Gas Range Pilot light went out.

throw the piece of **** out! nobody seems to know how to do this, and there is zero customer service or help available. there are problems like this all over the net with no answers.

Jul 28, 2008 | Tappan 30IN ELEC IGNa Oven

2 Answers

Wall Oven won't work

I tried randomly pushing 2 buttons at a time, and when I pushed "Timer Off/On" and "Cancel" together it unlocked and is now working fine. The following day it beeped a lot for an hour or so (must have been catching up on previous pushes) but now is back to normal.

Mar 14, 2008 | Tappan 30IN ELEC IGNa Oven

Not finding what you are looking for?
Safety 1st Forerunner 5-Point Logo

921 people viewed this question

Ask a Question

Usually answered in minutes!

Top Safety 1st Baby Gear Experts

Jennifer Rock
Jennifer Rock

Level 2 Expert

105 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18375 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

13668 Answers

Are you a Safety 1st Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides