Paslode framing nailer intermittent firing

Paslode im350Reliable, high-performance gas framing nail gun with low weight and excellent balance, enabling extended work periods with lower fatigue. Multi-angled teeth nose probe provides an additional bite to prevent tool sliding and ensure positive placement in timbers. The sequential trigger for safety. The lock-out function engages when only 3 nails remain.


1 x 2.1Ah Li-Ion Battery90min Charge TimeFires 3.1mm 51-90mm NailsFires up to 120/minFires up to 9000 Shots per Battery ChargeSequential Trigger ActionTool-Free Depth AdjustmentWithout Nose PieceWithout Battery IndicatorMagazine Window

Have all the nails been cleared out of the tool where they were jammed? If not take the fuel cell out of the tool, and remove the battery before working on it. If still persists come back to this website for further help.

Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems

heatman101

,/,/,./

Make sure you have the correct gas cylinder. There are more than one type of cylinders for these nailers. If it is not correct it won't seat and gas will leak. Whiring sound is normal, fan mixing oxygen. Make sure "O" ring is in place under the gas cylinder.

Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems

heatman101

[\[]]\

Any time these guns become intermittent or stop firing but the fan still runs, the first the to check is the expiration date on the gas cartridges. The do expire and this will make the gun work inconsistently or not at all.

You need a new actuator
I have in stock
airnailerparts dot com

could be a couple things, first are there nails in the magazine, this tool has a stop when low on nails it won't fire, second is the lower probe bent not allowing full push on the cylinder to load gas. Give me the model number and I will find a print or you can go to Paslode.com and type in the model number and get an owners manual that has a trouble shooting guide in it for help. Let me know and if I have helped you with your question would you please rate this response accordingly.

Hi,
Probably needs cleaning. You`ll need two new o`rings.

Make sure to blow out the magazine where the nails load, make sure the spring tension on the nail clip is working properly, make sure you're not holding the clip somehow with your off hand so the clip can't feed correctly.