Question about HP ScanJet 7650 Flatbed Scanner

1 Answer

HP ScanJet 7650 Flatbed Scanner

A FRIEND GAVE ME THIS SCANNER AND HE HAD NOTHING BUT THE SCANNER AND THE TMA NO POWER CORD, MANUAL, SOFTWARE OR INSTRUCTIONS WHERE OR HOW CAN I GET THESE ITEMS OR WHERE CAN I GET THEM

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 827 Answers

Hi,

The model is actually discontinued now, but you can download Driver Software and a Manual for the Scanjet 7650 from the HP website:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=uk&prodTypeId=15179&prodSeriesId=434502&lang=en&cc=uk

You can also get Parts information.

Hope this helps

Chris (ziraffa)

Posted on Jan 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TMA doesn't work ;code 22


If 22 is blinking in the Scanner LCDThe Transparent Materials Adapter (TMA) may be attached incorrectly or is broken.
  1. Disconnect the scanner power cord.
  2. Disconnect the TMA cord from the scanner.
  3. Verify there are no bent or broken pins in the cord plug of the TMA. If the cord has bent or broken pins, it will be necessary to contact HP .
  4. Reconnect the TMA cord to the scanner.
  5. Perform a self-test on the TMA. Click here for instructions to do a self-test on the TMA (bps05670) .
  6. Check that the TMA is properly positioned on the scanner glass; either reposition the TMA in the positioning plate or reposition the positioning plate on the scanner glass.
  7. Reconnect the power cord to the scanner.
  8. Attempt to scan.
If 22 "The scanner could not scan" displays on the screen and the Transparent Materials Adapter (TMA) is being used
  1. Disconnect the scanner power cord.
  2. Disconnect the TMA cord from the scanner.
  3. Verify there are no bent or broken pins in the cord plug of the TMA. If the cord has bent or broken pins, it will be necessary to contact HP .
  4. Reconnect the TMA cord to the scanner.
  5. Reconnect the power cord to the scanner.
  6. Perform a self-test on the TMA. Click here for instructions to do a self-test on the TMA (bps05670) .
  7. Attempt to scan.
  8. If the scanner still does not function, follow the instructions for resolving USB initialization and related communication errors (bps03850) .
If 22 "The Scanner could not scan" displays on the screen and the TMA is not being used
  1. Disconnect both the scanner power cord and the USB cable.
  2. Perform a self-test on the scanner if it has a built in self-test. Click here for instructions on performing a scanner self-test (c00030441) .
  3. If the scanner passes the self-test, reconnect the USB cable and attempt to scan. If the scanner fails the self-test, it will be necessary to contact HP.
  4. If the scanner still does not function, follow the instructions for resolving USB initialization and related communication errors (bps03850) .

May 05, 2012 | HP 4570C Flatbed Scanner

1 Answer

What kind of USB cord do I need for a HP scanjet 2200c


The best thing to do is to take the scanner to a computer shop so they can see what cables and power adapter you need.
You can download a driver and manual from this WEB site.
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&prodClassId=-1&contentType=SupportManual&prodTypeId=15179&prodSeriesId=28415

Apr 29, 2012 | HP ScanJet 2200C Flatbed Scanner

1 Answer

When I scan a negative, all I get is a picture of this negative which is useless. I thought that I could get the picture out of the negative that I scanned and save it so that I could get rid of the...


With the scanner you should have received a cd "HP Scanjet 4800 Series HP IMage Zone Software. Mine is version 5.3 for Windows/8.4 for Mac OS v 10.2.
I have this installed on a pc.
When the button on the lid (2nd from left ) is pressed this opens a window HP Scanning.
On this is an option to "Scan Negatives using the TMA (Transparent Materials Adaptor)" Select this and follow any further instructions concerning optons.

Jan 20, 2011 | HP ScanJet 4850 Flatbed Scanner

2 Answers

I keep getting an error message lamp problem cannot initialize. Hap scanjet 3970. no help from hp. Bob Hall


I guess you know that this is a Mechanical problem, it simply means the lamp which scans the document is not working properly. It's the bar like unit emitting very bright light which moves to and fro just below the scanner's glass.

There are three basic possibilities with this error.
  1. The Lamp itself.
  2. The Flex Cable which connects the Lamp with the Board (motherbaord of the printer)
  3. The connectors and the board itself
First, open it apart the check the scanner and remove the Lamp, now reconnect it after cleaning the connectors, contact points and the interfaces with cotton dipped in alcohol or spirit or acetone. Place it properly on it's position and power on the printer, check whether the error is still displaying or not. No positive outcome? Then switch off the machine and disconnect it, check the continuity of the flex cable, if it's alright and you see no continuity problem, then the problem is with the lamp or with the board or connectors, during this situation, you'll need another spare to check the issues so that you can find out the problem.

If there's continuity problem and you find it fault, replacing the cable will fix the problem.

On the other hand for connectors, you need to do it very carefully and look every connector points with great effort if you can see any bent or twisted among them, if you are sure that there's nothing to do with it, the the problem must be from the Board which is not as easy as we think could be repaired. You can replace it, while there a problem, we can't find the spare, and so it will be difficult but you could possibly get the one from a Repairing shop or Servicing Center.

*Warning*: If you know how to do all these things, just go ahead or else, please take it to a Service Center or call a Tech and get it repaired. Without proper knowledge, you may damage it if in case it could be easily fixable.

I wish you Good Luck.

Thanks for using FixYa.

Jul 09, 2010 | Scanners

1 Answer

I WANT TO KNOW THE MEAN OF ''ERROR 06'' IN HP SCANJET 8270 AND THE POSIBLE SOLUTIONS... THANKS


If LCD displays Error 06 or Error 09 , the TMA might require service
Press SCAN PICTUREc00068011.jpg button once (see Figure 3 above). The TMA lamp should turn on (see Figure 4 above). If pressed a second time, the TMA lamp turns off (if TMA is detected). NOTE: The scanner carriage lamp should be off when the TMA lamp is on and should be on when the TMA lamp is off. The only time the TMA could not be detected is if the accessory cable is not plugged into scanner

Jul 02, 2009 | Scanners

1 Answer

I am looking for instructions on this product.


Step 1: Open the scanner lid and remove the Transparent Materials Adapter (TMA).
Step 2: Place your slides or negatives into the appropriate template. Follow the orientation indicated by the icons on the template.
Step 3: Tip: If you are scanning fewer than the maximum number of negatives with the TMA, cover the empty spaces with the provided light shields to avoid letting any extra light in
Step 4: Place the template on the scanner glass, aligning the arrow on the template with the indicated mark on the scanner bed.
Step 5: Close the scanner lid and press the Scan Film button (or select the Scan Film option if you're using the HP Solution Center application on your PC).
Step 6: In the Scanning from dialog box, click Change Settings.
Step 7: Under Scan Shortcut Settings, select your Scan Type (either Negatives (TMA) or Slides or Positives (TMA)).
Step 8: Under Scan To select Save to file. Then click Scan.
Step 9: Under the Save Location dialog box, click Browse and enter the destination folder of your choice. Click OK and follow any on-screen instructions to finish scanning. The scan will be sent to the destination folder you selected. s.gif s.gif

May 01, 2009 | Scanners

1 Answer

Tma problem


Light in cover had failed,fitting a new cover solved problem.

Sep 02, 2008 | HP ScanJet 3970 Flatbed Scanner

1 Answer

Need manual and installation instructions Windows 98SE


This site has drivers for all versions of windows, and a manual. These are not the drivers made by the manufacturer - Acer does not support this scanner any longer and has no drivers for Windows Vista, XP, 2000 or NT. It also includes a manual that outlines how to use mirascan with this scanner, but does not seem to go into detail on how to set up the actual scanner. http://www.benq-eu.com/support/downloads/downloads.cfm?product=166&page=downloads&dtype=D Still, it should just be a matter of connecting it to your parallel port (the only port the cable should fit in on your computer), plugging in the power, and running the driver software. Once that's up, the manual can tell you how to use the software. Of course, I wasn't able to test this, because I don't have the scanner.

Aug 30, 2007 | AcerScan 310P Flatbed Scanner

Not finding what you are looking for?
HP ScanJet 7650 Flatbed Scanner Logo

Related Topics:

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Scanners Experts

D. E. Hev

Level 3 Expert

1059 Answers

Tony Isted

Level 1 Expert

49 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a HP Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...