Question about Onkyo TX-SR606 Receiver

1 Answer

I have a Sony BlueRay DVD player passing through an Onkyo TX-SR606 receiver. I'm using the TV speakers for sound right now. Cable works fine in this mode as I have the TV sound option turned on. No sound is coming through, however, for the DVD. Cable and DVD are connected via HDMI connection.

Posted by on

  • pisanond Jan 14, 2009

    The audio on the BlueRay is set to HDMI. When I direct connect the DVD to the TV via HDMI the audio comes through okay. Thus the problem is in the settings within the receiver. The receiver instructions states to set the TV speakers to "on" to play them from the appropriate source. Cable TV comes through via HDMI into the TV speakers just fine. Unless the receiver is not interpreting the DVD audio signals correctly it should work.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 133 Answers

Alot of times , you need to go into the bluray menue under audio, and make sure audio output is set to hdmi, and not componant

Posted on Jan 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Onkyo TX-SR606 HDMI Input


The problem is the hdmi board in the receiver .they are having trouble with the smd regulator and smd capactors that they are using on the board,they have updated the new boards as i have not got any back when replacing with the new boards. I have replaced at least 35 hdmi boards on this model. If you call Onkyo they will tell you that you have a hdmi board bad and take it to an onkyo dealer.

Apr 01, 2010 | Onkyo TX-SR606 Receiver

5 Answers

I cannot get video signal from my Samsung p1590 Blu Ray player via HDMI to pass through my Onkyo TX-SR606 AV Receiver. I get video if I connect Blu Ray player directly to TV, and have tried all HDMI ports...


I think this one is for the Onkyo wizards:

I would write them via email here:

http://www.onkyousa.com/feedback_form.cfm

1-800-229-1687
However I did find this 2 page hookup manual with nice notes at link listed below that may help you solve the mystery:

(seems you may have to assign the digital input)

http://filedepot.onkyousa.com/Files/QuickHookup/TX-SR606_QSS_En_A.pdf?CFID=918117&CFTOKEN=40624545&jsessionid=f0306ea8a0d68bb60a49102e3e5510576756


Assigning the Digital Input
If there’s no sound, you’ll need to assign the digital inputs as
necessary using the setup menus on the TX-SR606’s display.
If you connect your DVD player to the AV receiver’s COAXIAL 1
DIGITAL IN, and your cable/satellite receiver to the COAXIAL 2
DIGITAL IN, as shown, it’s not necessary to assign the digital input.
The onscreen setup menus appear only on a TV that is
connected to the HDMI OUT. If your TV is connected to the composite video or S-Video MONITOR OUT, or the
COMPONENT VIDEO OUT, use the TX-SR606’s display when changing settings.

Thanks for using FixYa!

Kelly

Feb 19, 2010 | Onkyo TX-SR606 Receiver

1 Answer

Onkyo tx-sr606 turns off during loud dvd sounds.


It sounds like you have a defective unit. I would contact the manufacturer and ask to RMA it.

Aug 08, 2009 | Onkyo TX-SR606 Receiver

2 Answers

7.1 speaker setup: no sound coming from right front/surr speakers


Solution to having no sound coming from certain speakers in a 7.1 speaker setup for TX-SR606 receiver when playing a DVD.

Review the cable setup for the DVD player since it was identified as the source of the problem. Best to unplug and plug in the cables to ensure they contact the back of the receiver's RCA jacks. Redo the microphone setup for Audyssey 2EQ calibration. A good chance that it is the cable that may have caused the malfunction and loss of sound from the speakers. The cables can come loose during setup and not plugged all the way to the back of the RCA jacks or a defective cable causing signal loss.

Apr 15, 2009 | Onkyo TX-SR606 Receiver

1 Answer

Onkyo TX-SR606 aspect ratio issue


you may want to try changing the aspect ratio on the HD box and the DVD as opposed to the receiver. This should do the thing

Mar 04, 2009 | Onkyo TX-SR606 Receiver

1 Answer

Onkyo TX-SR606 getting no sound from HDMI sources on speakers. I have a motorola cable box and a panasonic DMP BD-35K blueray player both attached to the SR606 via HDMI cables (HDMI3 and 1 respectively)...


Not sure if this is your fix, but I had what I thought was the same problem. I played with my Onkyo quite a bit ensuring the correct assignments for HDMI, audio and all that stuff. Turns out I neglected to make sure the output devices were properly assigned. Many devices aren't default to output sound over HDMI. I changed the audio out settings on the cable box to HDMI and suddenly the Onkyo worked great. I know, I'm an idiot for not checking that in the first place, but maybe someone out there is having the same trouble as well.

Feb 20, 2009 | Onkyo TX-SR606 Receiver

4 Answers

No sound from Sub Pre-out on Onkyo TX-SR606


Also, it could possibly the preout terminal itself that is not working. One way to prove that is by transferring the subwoofer cable from the preout and temporarily transfer it to the tape out section. If it ouputs sound from there, then that means the speaker and the cables are working fine and it's just the preout terminal itself that is not picking up anything. ^_^

Dec 16, 2008 | Onkyo TX-SR606 Receiver

1 Answer

ONKYO TX-SR606 Single output to TV


Hi there. for your receiver, the only time it can upconvert is when you go out as HDMI. In your current hookup (component out to tv) the signal from your cable (using a composite) will not be able to pass through the component cable. This means you either have to hook up your cable box using a component cable as well or add a composite cable (yellow) from monitor out of the receiver to the tv. Page 22 of the manual will show a diagram of the video signal flow. hope this helps.. ^_^

Dec 02, 2008 | Onkyo TX-SR606 Receiver

1 Answer

Onkyo tx-sr606 can not get it to work w tv using hdmi cables


try using a HDMI cable connecting the receiver from the "out" to the tv, then allocate through the setup menu what you have connected, say a cable box by hdmi, you would go to cable/sat allocate the port "hdmi1 or coax 1" then return. If it is a dvd click on dvd then allocate eg: "hdmi 2" then return.

Nov 16, 2008 | Onkyo TX-SR606 Receiver

Not finding what you are looking for?
Onkyo TX-SR606 Receiver Logo

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio & Video Receivers Experts

D. E. Hev

Level 3 Expert

1059 Answers

gbob59

Level 3 Expert

2963 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Are you an Onkyo Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...