Question about Woods INDUSTRIES 59112 INDOOR DIGITAL TIMER 24-HOUR

Open Question

I have a Woods TD 1000 (49112) timer. I plugged it in and there are 8's in the display. I've pushed every button and don't get a response from any.

Nothing changes when I push any of the buttons. I have the instruction sheet but first the buttons need to work!

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: I need printable instructions for

http://waterheatertimer.org/pdf/Woods-TD1000.jpg
I want you to answer back if this manual matches the Woods 59337.
Tell me if the photo below also matches.
Your feedback is important.


b576ae2.jpg

Posted on Oct 19, 2010

SOURCE: Woods In-wall Timer Heavy Duty, Model #59018 -- I

Quick answer:
1) Programming steps say 'press clock key to return to current time and day'
2) Use mode button and change between AUTO & RND >> try manual override in each mode
3) Does timer turn lights on-and-off with program, or do they blink too?
4) Swap Black and Red wires
5) Try timer on light in different room, on different circuit breaker
6) Timer might be defective

Longer answer:
Woods 59018 manual does not show troubleshooting steps except 'check wiring; switch Red and Black leads; and/or reset programming'

Seems unlikely you could program timer unless timer is wired correctly ... unless there is a short of some kind.

To review wiring.
Green goes to bare ground wire.
White goes to Neutral white wire (neutral is usually 2 or 3 white wires twisted together and shoved to back of box)
Black must connect to Hot from circuit breaker
Red must connect to Load (light, fan, motor etc)

How to test wiring
:
Disconnect timer and set aside.
Mark each wire
Separate wires in box so they don't touch
Use ordinary tester (you can tape tester leads to wood sticks)
Turn on power
You should have two black wires that were originally connected to switch
Test black wires to bare ground > when tester lights up, that is the Hot wire.
The other black wire goes to Load

Now you want to find the neutral.
Test the Hot black wire to white wires in box.
When tester lights up, that is neutral.

If everything checks out, I guess timer is defective.

Posted on Sep 29, 2010

  • 1 Answer

SOURCE: need setup instructions woods digital timer td

Here are the programing instructions.

Monti


_120.jpg

Posted on Nov 18, 2010

aquaman987
  • 927 Answers

SOURCE: how do I set my

I think this switch is set to go on at dark, then you can set how many hours after it goes on you want it go off. If you want the device to go on at dark and run for 2 hours, you stop at 2.
Gary

Posted on Dec 19, 2010

SOURCE: Instructions to set Woods indoor timer 59377

Open following link to identify timer and download manual
http://waterheatertimer.org/Woods-timers-and-manuals.html#59377

To set current time, press and hold clock button while pushing hour and minute buttons.
Then release clock button

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Posted on Feb 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WOODS 59018 TIMER WIREING CORRECT INSTALLED WITH POWER OFF NETURAL GROUND UP TO CODE LOAD /LINE PROPER.NEW OUT OF BOX WON'T RESET. STEP 1 LAMPS LOAD SIDE GOOD. RETIRED CONSTRUCTION ELECTRICIAN


I don't have answer for defective timer. Buy another timer if everything below checks out:
59018 7-day timer has limited 1 year warranty, and appears to be made by Tork
Timer is for 120Volt single-pole only.
Rated for 1000 watt tungsten, 8A ballast, 1/4 HP
Push reset button with toothpick > not necessary to press-and-hold other button to accomplish reset.
After reset, 12:00 am Monday should display.
Programs are deleted. Reprogram timer.

To check, change and delete specific programming, press PROG key until selected program displays, and then set new programming >>> or press-and-hold MODE button and press PROG button again to delete selected program.

Timer has non-replaceable 30-day carryover battery and does not lose programming after power outage, and will retain programs until battery is depleted.

Review wiring:
Hot to timer black.
Neutral to timer white.
Load to timer red.
Ground to timer green.

Lights will blink if timer red and timer white are connected to load together.
Timer will not function if timer black and red wires are reversed. Display will not show.

http://waterheatertimer.org/Woods-timers-and-manuals.html#59028

Aug 07, 2011 | Woods InWall 7 Day Digital Programmable...

1 Answer

Sunset sunrise doesn't seem to work anymore


Timer is not identified.
If digital timer does not function as before, try resetting timer and then re-program.
If timer has battery, then change battery and reset timer.
If reset does not restore functionality, then timer has gone bad. Most in-wall timers have 1 year limited warranty.

Below are common 7-day timers, but there are many different brands:

You posted under Woods 7-day timer: except Woods timer does not astronomic dawn dusk function. Woods 7-day is same as Tork 7-day and GE 7-day, and they do not have astronomic function.
http://waterheatertimer.org/pdf/Woods-59018-59028.pdf
http://waterheatertimer.org/Woods-timers-and-manuals.html#59028
Reset button is small round button.
Push in reset with toothpick or paper clip.
Then reprogram timer.

If you have Intermatic ST01C or EJ500 battery operated timer: Replace battery, then to reset timer: push-and-hold ON_OFF button, and then push reset button. Keep holding on-off button until display changes. Release on-off button and display will flash 12:00. Then reprogram timer.
http://waterheatertimer.org/Intermatic-timers-and-manuals.html

If you have Utilitec astronomic timer, then press reset button and reprogram:
http://waterheatertimer.org/Program-wire-Utilitec-LW60419.html

Aug 05, 2011 | Woods InWall 7 Day Digital Programmable...

1 Answer

How do I program Woods digital timer 59203?


Link shows all Woods timers and manuals
http://waterheatertimer.org/Woods-timers-and-manuals.html
If instructions below do not match your timer, look through timers on Woods page to identify, and then add a comment.

Manual for 59203
http://waterheatertimer.org/pdf/Woods-59203.pdf

Instructions below are for Woods 59203 & GE 59203 plug-in programmable timer with 2-prong polarized outlet:
Plug timer in until battery is charged.
If display will not show, then timer battery needs to be recharged, or timer may be busted, or electric circuit is tripped off, or electric circuit heeds to be tested with circuit analyzer.

Set current time:
Press and hold CLOCK button.
Press HOUR and MINUTE to set correct time with am and pm.
Press Day button to set current day.
Release clock button.

Program timer:
Press PROGRAM button until "1 ON" displays. This is program1 ON.
Press MINUTE and HOUR buttons to set ON time for program1
Press DAY button to choose day or group of days for program1 ON

Press PROGRAM button until "1 OFF" displays. This is program1 OFF
Press MINUTE and HOUR buttons to set OFF time for program1
Press DAY button to choose day or group of days for program1 OFF

Press PROGRAM button until "2 ON" displays. This is program2 ON.
Repeat steps above to set ON and OFF time for 5 programs.

When programming is completed, press CLOCK button to exit programming.
Press ON/AUTO/OFF button until Auto displays.

Make sure lamp is turned on.
Make sure bulb is good.

Dec 11, 2010 | Woods Indoor 24 Hour Digital Timer (59203)

1 Answer

I need instruction for the timer


You posted under Woods 59403 timer
If this is not your timer, add a comment.
59403 timer manual:
http://waterheatertimer.org/pdf/Woods-59403.pdf

If you have different Woods timer, look at images at link below to identify timer.
Add a comment if you need help.
http://waterheatertimer.org/Woods-timers-and-manuals.html

59403 programming Instructions:
Plug timer into indoor or outdoor wall outlet.
Plug lights into timer.

Set clock:
Hold down clock button.
Press day button until current day displays.
Press Hour button until current hour displays.
Press min button until current minute shows.
Release clock button

Program timer:
Press PROG button until 1 ON displays
This is Event1 ON
Press Day button until selected day or days displays for event1 ON
Press Hour button until selected hour displays for event1 ON
Press Min button until selected minute displays for event1 ON

Press PROG button until 1 OFF displays
This is Event1 ON
Press Day button until selected day or days displays for event1 OFF
Press Hour button until selected hour displays for event1 OFF
Press Min button until selected minute displays for event1 OFF

Press PROG button until 2 ON displays
This is Event2 ON
Repeat steps above to set up to seven events.
Recommended you make chart of your on-off times before starting to avoid conflicts in programming.

When programming is finished, press MODE button until automatic displays.
To override programming, press MODE button until lights come on.
For random operation, press MODE button until RDM displays

Dec 02, 2010 | Woods Outdoor 7 Day Digital Two Outlet...

1 Answer

I would like to have the instructions for operation of the Timer.


You posted under Woods 59403 timer
If you have different Woods timer, look at images at link below to identify timer.
Add a comment at any time
http://waterheatertimer.org/Woods-timers-and-manuals.html

59403 timer manual:
http://waterheatertimer.org/pdf/Woods-59403.pdf

59403 programming Instructions:
Plug timer into indoor or outdoor wall outlet.
Plug lights into timer.

Set clock:
Hold down clock button.
Press day button until current day displays.
Press Hour button until current hour displays.
Press min button until current minute shows.
Release clock button

Program timer:
Press PROG button until 1 ON displays
This is Event1 ON
Press Day button until selected day or days displays for event1 ON
Press Hour button until selected hour displays for event1 ON
Press Min button until selected minute displays for event1 ON

Press PROG button until 1 OFF displays
This is Event1 ON
Press Day button until selected day or days displays for event1 OFF
Press Hour button until selected hour displays for event1 OFF
Press Min button until selected minute displays for event1 OFF

Press PROG button until 2 ON displays
This is Event2 ON
Repeat steps above to set up to seven events.
Recommended you make chart of your on-off times before starting to avoid conflicts in programming.

When programming is finished, press MODE button until automatic displays.
To override programming, press MODE button until lights come on.
For random operation, press MODE button until RDM displays

Dec 02, 2010 | Woods Outdoor 7 Day Digital Two Outlet...

1 Answer

My 24 digital timer its not working! isnt there anyway to reset? it doesnt show anything on the screen!! why?


If plug-in timer does not display, then
1) Reset button has tripped > push reset with paper clip
2) power is off > plug something else in receptacle to check receptacle
3) timer is loose in receptacle > unplug timer, spread prongs a bit, and plug back in
4) timer has gone bad.

Except for a few Woods and Intermatic outdoor timers, plug-in timers have internal rechargeable battery. Battery is not replaceable so when battery goes bad, the timer is bad.

See other Woods plug-in timers:
http://waterheatertimer.org/Woods-timers-and-manuals.html

59203 plug-in timer at Amazon for $12
http://www.amazon.com/Woods-59203-Digital-Appliance-Repeats/dp/B001Q9EFU0

If you buy a timer, save the instructions like gold so you don't have to write fixya next year looking for instruction that nobody can find.

Nov 19, 2010 | Woods Indoor 24 Hour Digital Timer (59203)

1 Answer

I'm having trouble setting this item. I can get it to come on, but it won't turn off at the set time. What am I doing wrong? Thanks, Janene


I don't have a Woods 59112 Manual
Here's link to Woods 49063 manual aka Woods TD1000 aka Noma TD1000
If manual is same/similar as your manual, then read solution given below
If solution below is incorrect, the write out your instructions ... I found that writing out instructions makes things clear.

4153f0e.jpg


Solution:
I think you have set ON time but did not set corresponding OFF time
Below is whole programming layout for you to read through
The important thing is to look at the display while programming
For example, lets say you are setting ON time for PROG1
For ON time, the display shows 3 things:
-display shows PROG in upper left corner
-display shows the number 1 to right of time
-display shows the word ON to the right of the number 1

Now you want to set OFF time for PROG1

For OFF, the display shows 3 things:
-display shows PROG as before
-display shows 1 as before
-display has changed and shows the word OFF to right of number 1


Here's how to set Woods TD1000 timer

Plug in timer to see if battery will recharge. Display shows when battery is charged. No display, then timer is no good.

TD-1000 timer has 8 on-off functions per 24-hour day

Timer has 5 buttons + reset:
TIME MODE PROG HOUR MIN

Set current time
Press and hold TIME > use Hour to set hour, Min to set minute
Release Time button ... correct time should show

Program: Capacity for 8 on-off times per day
Press PROG to set first ON time
ON and number 1 are displayed on left
Use hour and minute button to set ON time

Press PROG to confirm
Now, OFF and number 1 are displayed
Use hour and min key to set OFF time

Press PROG to confirm

When 8 programs are set, Press MODE key.
Choose Manual OFF. Manual ON, Auto ON, Auto Off

To use programs, select Auto ON

DST daylight savings time has to be done manually.
Press HOUR MIN button simultaneously > timer set up one hour
Repeat again and timer goes back one hour

Do not plug timer into extension cord > must be plugged into wall

Oct 05, 2010 | Woods INDUSTRIES 59112 INDOOR DIGITAL...

2 Answers

How to program a woods TD1000 indoor timer


Here's how to set Woods TD1000 timer

This is older timer with backup battery. Plug in timer to see if battery will work. Display shows when battery is charged. No display, then timer is no good.

TD-1000 timer has 8 on-off functions per 24-hour day ...newer timers each offer 7 day function with choices of each-day, week-day, or week-end programming. The wider choices with newer timers may explain why TD1000 instructions are hard to find

Timer has 5 buttons + reset:
TIME MODE PROG HOUR MIN

Set time
Press and hold TIME > use Hour to set hour, Min to set minute
Release Time button ... correct time should show

Program: Capacity for 8 on-off times per day
Press PROG to set first ON time
ON and number 1 are displayed on left
Use hour and minute button to set ON time

Press PROG to confirm
Now, OFF and number 1 are displayed
Use hour and min key to set OFF time

Press PROG to confirm

When 8 programs are set, Press MODE key.
Choose Manual OFF. Manual ON, Auto ON, Auto Off

To use programs, select Auto ON

DST daylight savings time has to be done manually.
Press HOUR MIN button simultaneously > timer set up one hour
Repeat again and timer goes back one hour

Do not plug timer into extension cord > must be plugged into wall

Oct 04, 2010 | Woods Indoor 24 Hour Digital Timer (59203)

1 Answer

How to program a woods TD1000 indoor timer


Here's how to set Woods TD1000 timer

This is older timer with backup battery. Plug in timer to see if battery will recharge. Display shows when battery is charged. No display, then timer is no good.

TD-1000 timer has 8 on-off functions per 24-hour day ...newer timers offer 7 day function with more programming choices... which may explain why TD1000 instructions are hard to find

Timer has 5 buttons + reset:
TIME MODE PROG HOUR MIN

Set time
Press and hold TIME > use Hour to set hour, Min to set minute
Release Time button ... correct time should show

Program: Capacity for 8 on-off times per day
Press PROG to set first ON time
ON and number 1 are displayed on left
Use hour and minute button to set ON time

Press PROG to confirm
Now, OFF and number 1 are displayed
Use hour and min key to set OFF time

Press PROG to confirm

When 8 programs are set, Press MODE key.
Choose Manual OFF. Manual ON, Auto ON, Auto Off

To use programs, select Auto ON

DST daylight savings time has to be done manually.
Press HOUR MIN button simultaneously > timer set up one hour
Repeat again and timer goes back one hour

Do not plug timer into extension cord > must be plugged into wall

Oct 04, 2010 | Woods INDUSTRIES 59112 INDOOR DIGITAL...

Not finding what you are looking for?
Woods  INDUSTRIES 59112 INDOOR DIGITAL TIMER 24-HOUR Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Woods Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5089 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Woods Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...