Question about Sharp 27C-240 27" TV

1 Answer

Thin horizontal line across the screen

When I turn on the television I get a thin horizontal line the width of the screen and the picture opens up slowly to about half of the screen

Posted by on

  • 1 more comment 
  • bluesmoke_20 Jan 12, 2009

    will give results having tackled the problem.Thank you

  • bluesmoke_20 Jan 12, 2009

    found a broken solder joint on the positive terminal of the eletrolytic capacitor will solder see what happens befoe replacing it.

  • bluesmoke_20 Jan 13, 2009

    still having the problem,although I changed the capacitor.Could it be the flyback transformer?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 57 Answers

You need to replace the electrolytic capacitor in the horizontal section of of your tv sets,cause the capacitor is weak.need to repair

Posted on Jan 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Describe your Sansui DTV2760 27" TV Problem Loss of picture. A very thin line goes across the screen.


vertical line = bad horizontal output transistior
horizontal line = bad vertical output transistor

Oct 05, 2009 | Sansui DTV2760 27" TV

1 Answer

Screen is black with a thin horizontal line


Change the vertical IC and check the electrolitic capacitors near them

Aug 28, 2009 | Standard (CRT) Televisions

1 Answer

No picture on screen


No,Ur vertical/horizontal IC is shorted or cold soldiers.Could be the parts that support the IC is also.

Aug 19, 2009 | Sanyo DS27820 27" TV

1 Answer

Toshiba 27D46 Black Screen - White Horizontal Line


I fixed the problem by taking it to a repair shop

Apr 24, 2008 | Toshiba 27D46 27" TV

2 Answers

TV has a thin horizontal line across the screen


intermintence in vertical IC deflection its a job for experienced tech need to look for that circuit and do fine job resolding that IC

Apr 01, 2008 | Sanyo DS31590 31" TV

1 Answer

Picture


readjust the fucos and screen at the flyback.if not replace your horizontal trasistor,hope this will help

Feb 08, 2008 | RCA F20TF20 20" TV

1 Answer

Tv not working


this symptom, sometimes called the tube light effect, it is characterised by a bright thin horizontal line across the middle of the screen. this symptom is caused by a breakdown in the vertical deflection circuit. hence maybe the trouble maybe in the vertical oscillator, amplifier or output circuits. but if all i have said is not clear to you, better bring it to a qualified tv technician. good luck!

Mar 08, 2007 | Sanyo DS31590 31" TV

2 Answers

Horizontal 'pinstripe' lines on all channels


sound like the screen control on the flyback is set just a little too high. the flyback has the red wire attached to the tube. the flyback has 2 small adjustable controls. if you look close enough 1 is marked focus & on is screen. turn the screen slightly to the left & look at your picture. the screen is like a master brightness & if it's up too high you will see what is called retrace lines. good luck.

Jan 16, 2007 | Daewoo DTQ-20N3FC 20" TV

Not finding what you are looking for?
Sharp 27C-240 27" TV Logo

632 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Are you a Sharp Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...