Question about Projection Televisions

1 Answer

EPSON POWERLITE BULB REPLACEMENT PROBLEMS

I REPLACED MY PROJECTOR LAMP FOR MY EPSON POWERLITE 82C PROJECTOR BUT IT STILL SHOWS AS IT WAS WHEN IT WAS BLOWN.....TRIED RESEATING BULB SEVERAL TIMES BUT NO LUCK. BULB REPLACEMENT LOOKS FUNTIONAL..... THE PROJECTOR IS PROGRAMMED TO AUTO START ONCE IT POWERS UP ...I GET ALMOST 5 GREEN FLASHES AND THEN A DOUBLE RED LIGHT. THE LAMP LIGHT FLASHES WHERE THE PROJECTOR POWER LIGHT REMAINS SOLID......

Posted by on

  • 3 more comments 
  • flowmaster33 Jan 11, 2009

    unfortunately my remote has grown legs and gone on walkabout so how do i reset the lamp hours with no screen to see what im doing



  • flowmaster33 Jan 14, 2009

    EMP-82 .........

  • flowmaster33 Jan 15, 2009

    tis the epson powerlite 82c multimedia projector .......model no. emp-82c



  • RJJQ Feb 20, 2009

    How can you reset the lamp life when the lamp does not turn on ? You cannot see the menu...
    Powerlite 76C
    Rene

  • Anonymous Apr 21, 2009

    I have this same projector, and I need to know how to reset the lamp life without a screen (it won't come on for me either).

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 240 Answers

Ok
look at your users manual.
all epson models need to have lamp life reset befor the lamp will light.

I have had this same problem befor.

Daniel.

Posted on Jan 11, 2009

  • Daniel Conklin
    Daniel Conklin Jan 12, 2009

    you will neeed your remote, and if you send me the model number I can help you futher

    regards,

    daniel

    ps: anyremote dot com is a good web site to find you a replacment remote.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What should i do when my projector's temperature light is flashing red 30 sec after start up?


try changing the light bulb. they have a time limit on them. with mine, I had to change the light bulb. Not cheap, but it worked for me.

Nov 12, 2014 | Epson PowerLite Home Cinema 8350 3LCD...

1 Answer

Epson powerlite home cinema 8100 picture quality problem?


It can be a bad lamp. Under menu setting, select Dynamic or presentation. Those are my favorite picture settings.

Aug 30, 2014 | Epson Powerlite Home Cinema 8100 Home...

1 Answer

Why epson projector eb-56 not warking red light in lamp


Trying unplugging it and then plugging it back in. Check the air filter to make sure it's clean. If the lamp light is still on, mostly you have a bad lamp. I always buy new lamp from Bulb Source. They have a quick turn around for delivery.

Jun 13, 2014 | Epson Projector Lamp for EB-1830

1 Answer

Epson powerlite 710 image too big for screen


Move the projector closer to the screen.

Jun 07, 2012 | Epson Projection Televisions

1 Answer

Reset lamp timer on epson 5500c after timer has expired


Could be a bad ballast. Did you get the door and latch closed completly?

Apr 26, 2012 | Epson Powerlite 5500c - Lcd Projector -...

3 Answers

How do I open the top of the projector to replace the light bulb?


Hi, Follow :- http://www.wikihow.com/Replace-a-Projector-Lamp There is a Video as well on the same page.If you wish to Purchase the Bulb, you could consider :- http://www.partstore.com/minisites/projectorLamps/HowToReplaceProjectorLamps.aspx Let me know, if needed further assistance, Hope i helped you. Thanks for using ' Fixya ' and have a nice day!!

Feb 10, 2010 | Projection Televisions

1 Answer

Good morning, I have an interesting issue with my Epson 6100 Powerlite home theater system. I wish to remove the original lamp in the projector and then replace it with a Photographers Flash/modeling...


All projectors have a safety switch for the lamp door. Locate it and just by-pass it. It sounds like you have the knowledge so let's go for it..

Aug 19, 2009 | Projection Televisions

1 Answer

How to change the lamp


See the User's Guide (http://www.epson.co.uk/Projectors/Epson-EMP-82/Drivers-Support) starting on page 59 (Lamp Replacement Period). There is one screw on the case and 2 screws that hold the lamp in place. See document for pictures.

Apr 28, 2009 | Projection Televisions

1 Answer

EPSON EMP 3000


There is an adjustment in the Video section for adjusting it to look square.

Aug 13, 2008 | Epson ELPSC07 for PowerLite Home 10,...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

764 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...