Question about Mitsubishi WD-62525 62" Rear Projection HDTV

2 Answers

Wavy picture and now has no picture. lamp was replaced.

Wavy picture and now has no picture. lamp was replaced but nothing changed. it has sound.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 5,568 Answers

The wavy picture points to a power supply problem.
Even after the digital changeover in Feb., the vertical scan rate (the pace at which the picture is built from the top to the bottom), will still be quite close to our line frequency of 60 Hz. If the filtration of certain DC service voltages is poor, the remaining 'ripple' on the DC can interact with this scan rate and produce the kind of anomaly you describe and the lamp has no influence on this. The power supply may have now failed totally. I hope you didn't pitch the old lamp; it may still have some life left.    Unless this is a common problem with this particular chassis, it will take a tech with the necessary instruments to ferret out the bad component, likely a capacitor.

Posted on Jan 11, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 108 Answers

This set is notorious for defective capacitors. there are many that need to be replaced. I suggest dealing with an authorized mitsubishi servcer for this one.

Posted on Jan 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix a non responsive tv set?


Do the ballast first. That should get the picture back. The main board controls everything else.

Oct 08, 2016 | Televison & Video

2 Answers

Samsung DLP TV no picture or sound 2 weeks old lamp


Hello, DAvid43, what model is your Samsung DLP tv?

Jun 01, 2008 | Televison & Video

1 Answer

Have a 50 inch hlp506w model samsung projector tv. it had wavy lines through it, and then turned off. it is continuing to try and turn on with the standby/temp and lamp lights flashing. replaced lamp...


Change the tv Ballast board too.This board only job are to help it to ignite the tv projection lamp. This tv also have a colors wheel design into it too.If tv have colors pictures flashes or Black& White flashes within it pictures or tv have grinding noises or humming sounds,than the tv colors wheel it is warp and dead.This tv colors wheel must be replaced,because the colors dis wheel is warn out.

Jul 05, 2011 | Samsung HL-P5063W 50" Rear Projection HDTV

1 Answer

When turned on picture is very wavy (can't tell what you are even watching). After a time it becomes clearer until picture eventually returns. Recently, picture is wavy, mores on top, and has a slight...


Hello,

The problem is from the lamp of the television, it seems to be having some faults, it is gradually getting damaged.

It will start by being wavy until it goes completely blank.

Some lamps go for about $125 or more. Some go for $200.

Take care and Good luck

Oct 23, 2010 | Televison & Video

1 Answer

When you turn on the the TV the picture is good with in a minute or so the Picture turns wavy and has a double image. I can turn it off, then turn it right back on the picture is good for any where a...


Hello,

The problem with the television is the lamp. It is faulty that is why the screen turns wavy in minutes.

The solution to that is to replace the light and your television will be in good condition once again.

Take care

Oct 10, 2010 | RCA P52926 52" Rear Projection Television

1 Answer

Flashing red light saying lamp and no picture.


REPLACE LAMP !!!
Buy an Orginal Replacement Lamp.

May 19, 2010 | Sony Grand WEGA KDF-50WE655 50" Rear...

2 Answers

Just replaced the lamp on my Toshiba 62HMX84. Picture still is not coming on I have sound. When you turn on the TV you hear a clicking sound that goes away and then the TV try's to restart itself Thinking...


I have a 62HM84 Toshiba TV. I lost picture on my TV in the past i have bought the lamps and i just put it on and the picture comes on. This time when i replaced the lamp nothing happens no picture. It tries 8 times to turn on, but nothing happens. Can you help me with is what is the problem.

Dec 15, 2009 | Toshiba 62HMX84 62" Rear Projection HDTV

1 Answer

Toshiba 42 in 720 DLP TV MODEL HM66


You need to replace the lamp in this set. The "pop" you heard was the lamp popping.

Josh

Feb 24, 2008 | Toshiba 42HM66 42" Projection HDTV

1 Answer

Red?Green picture


You may have inadvertantly loosened a cable connection to the DMD or logic board... You might be able to shut it down, unplug the unit and remove the lamp.. With the lamp out take a good flashlight and shine it into the lamp housing area inside the Tv and see if you have any wire obstructions that you could have contacted with the edge of the housing as you were removing or inserting the lamp...
Bill

Dec 18, 2007 | Toshiba 50H72 50" Rear Projection...

1 Answer

57"H82 Toshiba-- wavy picture


you got somes capacitor bothering you, and nop, there are nothing you can do, but call a tech, the problem could be in the video card or in the power supply but is a tech job....good luck

Aug 08, 2006 | Toshiba 65H82 65" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-62525 62" Rear Projection HDTV Logo

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1207 Answers

The Knight
The Knight

Level 3 Expert

72620 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...