Question about Sony KP-48S35 48" Rear Projection Television

1 Answer

Sony kp48s35 (rear projection tv)

Every time I plug any type of RCA jack or cable to the TV the picture blinks off and on with nothing plugged in the picture stays on and the sound is fine. Please advise me on any trouble shooting techniques you may have available. Thanking you in Advance, James Harris jr.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 41 Answers

You need to have the crt px tubes checked for heater to cathode shorts, a picture tube restorer is needed to refurbish one or all three tubes to restore balance to tubes. Sony has a px muting built into the circuitry to save the tubes from being destroyed. If one tube is conducting more than one of the other two the imbalance is detected and causes picture (px) muting... blinking on & off the picture. Most repair shops have this crt restorer on hand.

Posted on Jul 22, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to get hook up with AUVIO wireless headphones to SONY TV MODEL KDL-40W600B. If not AUVIO then my Beats pill. Goal to have TV sound in/on bed close to me. Beats pill Blootooth


Jean,
I take it the Auvio wireless headphone main base has both dual rca and optical in jacks? If so, what you need is a 3.5mm stereo male to 2 rca male cable. You will plug in the 3.5mm male plug into the green audio out/headphone jack port that should be on the back/left rear side of your TV. Then you will plug the dual rca plugs of the cable into the Auvio rca inputs. You can get the cables in various lengths so you can have the Auvio base in a good location. If you need a visual of the cable type: http://www.monoprice.com/product?c_id=102&cp_id=10218&cs_id=1021815&p_id=5598&seq=1&format=2
Hope this helps:)

Sep 13, 2015 | Sony Televison & Video

1 Answer

Cannot get picture/menu on screen!


Hi,

The Sony recorder is connected to the TV via the RCA cables (for both audio and video)? How many inputs does your TV have? One cable input and one RCA line in (making a total of two? Did you eliminate the possibility that the recorder might be defective by trying it on another TV?

Dec 25, 2007 | Sony RDR-VX555

1 Answer

I have a new flat sreen tv with abroken input i have direct tv a can not conect cable any fix? thank you


did u break one of the plugs off the tv what plug is it a rca jack or what does the receiver have any oter a/v prts that u can use like hdmi or maybe s-video that u can use

Jan 24, 2011 | RCA D52W19 52" Rear Projection Television

1 Answer

Power light blinks 3 times, no picture


Thats usually caused by the cp150, CP120 or CP114 capacitor having failed. You can get the repair kit by the same name from www.tvrepairworld.com The kit contains the caps and the instructions.

Jun 03, 2010 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

How can i watch movies from computer to my tv


You probably need to get a composite video output card for your computer. Actually, I've seen many cards that have both a composite video output AND a DVI output port on 1 card. The DVI output will give you a noticeably sharper picture than composite video, but you need to check if your TV has a DVI or HDMI input. (If it was manufactured after 2000, it probably does.) If you TV was manufactured after 2006, it probably has 1 or more HDMI inputs instead of DVI. You can buy a DVI to HDMI converter cable. That takes care of the picture; to get sound to the TV, you will need to connect separate sound cables to your TV. Your computer needs to have a line-level output jack on it's sound card, and you will need to get an adapter cable (from Radio Shack) to convert the stereo mini-plug to 2 RCA type plugs to plug into your TV. And that should do it!

Dec 17, 2009 | Mitsubishi WS-65513 65" Rear Projection...

1 Answer

Tv will not on. No picture no sound


buy a new one. or bring it to the store you bought it at

Jun 21, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

The tv just randomly turns off by itself


Check to see how many times it blinks when turning off and then look for the codes for Sony tv blinks. this will tell you what's wrong. This set is notorious for Shorted tubes.

Feb 27, 2009 | Sony KP-57WS500 57" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75767 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...