Question about Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+
When we reprogram doors still open with my naber clicker if notbith one door and at times opsit door or both at the same time how to fix it.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I've never seen the first set of steps you mention. You always need to press the "learn" button first so the opener will be in the mode to capture the new code. As far as I know it is not necessary to hold the Enter button on the keypad (at least I never have). While the "learn" LED is lit on the opener, just key in the new code and press Enter.
Maybe you should try clearing the receiver first by pressing the "learn" button and holding it until the LED either goes out or starts flashing (depends on model). Then try reprogramming. Maybe the little computer is confused.
Posted on Dec 01, 2008
SOURCE: i installed a model hd900d
My best advise to you is get the brand name remote for your opener. I know it sounds like a pain but click brands are not super great because there supposed to work for many different kinda. For the most part you can call your local garage door dealer and pick one up for your opener. They may sell you a lift master brand opener which is find sears/liftmaster/chamberlain are all the same. Should only be about 35 bucks if you pick it up
Posted on Feb 10, 2009
On the garage opener that actually opens the door the one on the
ceilling has a green or orange button that is called the learn button
just press and release it you have 30 seconds to punch in a 4 digit
code and when your done press and hold the enter button until the
lights on the garage open blink once or twice then just press the code
again and it will open the door press enter once to reverse the effect
and and twice to stop the door completely.
Hope that helps
Posted on Mar 17, 2009
SOURCE: Universal garage door remote
I have a feeling your neighbor operated their door opener when you were programming your new clicker. Try erasing the memory of your opener and then program the clicker again making sure your neighbors do not operate theirs at the same time. To erase the memory hold the smart/learn button in for 10 seconds.
Posted on Jul 22, 2009
If the following instructions don't work and you have a good battery the keypad has failed.
Locate the smart/learn button on the rear of the motor unit near where all those white wires go. Press and immediately release this and then walk over to your keypad and key in your 4 digit code and press enter.
Posted on Apr 07, 2010
Testimonial: "Bless you....thanks so much... its working, yea."
Tips for a great answer:
Jun 06, 2014 | Sears Craftsman LiftMaster Chamberlain...
Apr 03, 2011 | Sears Craftsman LiftMaster Chamberlain...
Sep 25, 2010 | Sears Craftsman LiftMaster Chamberlain...
May 18, 2010 | Sears Craftsman LiftMaster Chamberlain...
Apr 26, 2010 | Sears Craftsman LiftMaster Chamberlain...
Dec 31, 2009 | Sears Craftsman LiftMaster Chamberlain...
Oct 05, 2009 | Sears Craftsman LiftMaster Chamberlain...
Jul 21, 2009 | Sears Craftsman LiftMaster Chamberlain...
Mar 31, 2009 | Sears Craftsman LiftMaster Chamberlain...
Dec 11, 2008 | Sears Craftsman LiftMaster Chamberlain...
Apr 18, 2016 | Sears Craftsman LiftMaster Chamberlain...
66 people viewed this question
Usually answered in minutes!