Question about Kodak EasyShare Z710 Digital Camera
I have a Kodak EasyShare Z710 and a HP Photosmart M447 and on both of them the lense will not eject .
Some cameras can be used as a webcam, however i dont think Kodak thought this through and therefore did not provide software for webcam on the cd.
Posted on Sep 24, 2008
Yes you are. My wife denied that she dropped in the sand but I found a list of photos that she wanted to print on a post-it paper in the cover and it had sand all over the sticky part. Used the pressure air spray to clean the rings and it is back to life. Well It worked but there was some problem during zoom in&out, so I spray the rings while zooming and out and that cleaned it. I hope I don't have to open it to clean the mechanism. Thank you.
Posted on Jun 08, 2009
could be a faulty capacitor or the software needs to be updated. The manufacture will repair it for $50, otherwise you may get lucky enough to find a download on the web. Sometimes the zoom gets stuck and needs to be blown out or jiggled to work again.
Posted on Oct 07, 2009
Make sure the flash door is popping open all the way. If it has recently received a hard shock or bump, it might have blown the flash. If it is still under warranty, might try taking it back. Also check the battery power.
Posted on Dec 07, 2009
SOURCE: Our Kodak easyshare z710 got
Here's a last chance option:
Take as much of the device apart as possible: remove battery, memory cards, lenses. Bury the device in a bowl of rice and leave overnight. Cross your fingers.
Hope it works!
Posted on Mar 04, 2011
Tips for a great answer:
Oct 17, 2012 | Kodak EasyShare Z710 Digital Camera
Mar 04, 2011 | Kodak EasyShare Z710 Digital Camera
Nov 01, 2010 | Digital Cameras
Dec 17, 2009 | Kodak EasyShare Z710 Digital Camera
Sep 21, 2009 | Kodak EasyShare Z710 Digital Camera
Aug 19, 2009 | HP Photosmart M447 Digital Camera
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: