Question about Microsoft Xbox 360 Wireless Controller and Play & Charge Kit - Game pad - Micros

1 Answer

Assembling the play and charge kit

How do you attach the battery carger to the wire piece that goes to the port on the xbox

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The wire piece connects to the top of the controller. Align it so the light is on the front, and press straight down until it snaps into place. Connect the other (smaller) end to your console.

Posted on Jan 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ho w to fix x box from controller to x box is really slow how to make it normal


Learn how to connect a wireless or wired controller to your Xbox 360 console.
Connect a wireless Xbox controller
  1. Turn on your console.
  2. Press and hold the Guide button on the controller until the controller turns on.
99383ff6-d9ea-47d0-a9be-b71064439804.png?v=1#controller-guide-push-m-m.png
  1. Press and release the connect button on the console.
Xbox 360 E console fbbfb609-f7ed-4e6e-bd35-7543b1c20d61.png?n=xbox360-connect-m-s.png Xbox 360 S console Original Xbox 360 console 342c6e70-9e56-43d8-bb3a-05f5411040bd.png?v=1#xbox360s-connect-m-m.png 170df81e-0a79-49be-8236-a0fb68eec37b.png?v=1#xbox360-connect-m-m.png
  1. Within 20 seconds, press and release the connect button on the controller.
6b0f2e03-3010-4065-800a-cbe24e204127.png?v=1#controller-connect-m-m.png
  1. When the lights surrounding the power button on the console stop flashing, the controller is connected.
On the Xbox 360 S console, each connected controller is assigned to one of four positions. Each position corresponds to a lighted section around the console power button and the controller Guide button. On the 360 E console, a solid green light on the front of the console indicates that the controller is connected. To determine the player position associated with your accessory, look at the ring of light that surrounds the Guide button on the controller.
c9341988-8ed5-4217-9b87-353de50efbec.png?v=1#connect-xbox-controller-m-m.png 5e4ab6ab-8cb0-41e6-a037-b88221a430c7.png?n=connect-xbox-controller-360-m-s.png
71add0b7-ddf2-4439-b4b4-f50f156d92b7.png?v=1#controller-batteries-m-m.png If the controller does not turn on, check the batteries. Insert fresh AA batteries, making sure they are correctly positioned in the battery case.
You can also use the Xbox 360 Play & Charge Kit or the Xbox 360 Quick Charge Kit to power the controller. Learn more about Xbox controllers and chargers.
To connect additional controllers, follow these same steps again. You can connect up to four controllers to the console. Each connected controller is assigned a position that corresponds with the lighted sections that appear around the console's power button and around the Guide button located in the middle of each controller.
  • To disconnect a wireless controller, press and hold the Guide button for three seconds, and then choose to turn the controller off.
  • When you turn off the console, the controller will reconnect the next time you turn on the console.
  • The controller can be connected to only one console at a time. You can connect the controller to a different console, but the connection to the previously connected console will be lost.
Connect a wired Xbox controller
5fb17f50-7448-45d5-a294-9ea90994f55b.png?v=1#controller-wired-m-m.png Plug the Xbox 360 Wired Controller into a USB port on the Xbox 360 console. There are two USB ports on the front of the console. To disconnect the controller, pull on the connector, not the cable.
cbe46bf0-3a46-4d53-9d8c-6697aa57622a.png?v=1#controller-cable-release-m-m.png The cable on the Xbox 360 Wired Controller has an inline release. The inline release on the controller cable is a safety feature designed to reduce the chance of the Xbox 360 console falling if the cable is pulled.
Wireless controller troubleshooting
If your wireless controller disconnects or cannot connect to your console, see Xbox 360 Wireless Controller disconnects or can't connect.
If your wireless controller does not turn on or loses power, try the following solutions:
Solution 1: Replace the batteries
Insert a new set of AA alkaline batteries into the Xbox 360 Wireless Controller, and then try to turn it on.
Solution 2: Try a different battery pack
If you have another Xbox 360 Wireless Controller, take the battery pack off that controller and attach it to your controller. Then try to turn your controller on.
If your controller works with the different battery pack, your original battery pack might be defective. If your controller is under warranty, you can order a replacement battery pack from Xbox Support . See the Assistance section at the bottom of this page for more information.
If your controller is out of warranty, you can buy a new battery pack from a retail store.
Solution 3: Try a rechargeable battery packIf you or a friend has an Xbox 360 Rechargeable Battery Pack, attach that battery pack to your controller and try to use your controller. If your controller works with the rechargeable battery pack attached, you can buy a new battery pack from a retail store or order a replacement battery pack from Xbox Support. See the Assistance section at the bottom of this page for more information.

Feb 08, 2013 | Microsoft Xbox 360 Controller

1 Answer

My xbox 360 controls will not sync to the console


This is often due to battery life of the controllers. First, connect your controller to your Xbox 360 via the Play & Charge Kit. Does the controller respond now? If yes, your battery needs to be replaced. If no, then the controller had a hardware fault that needs to be looked at by a professional.

Mar 25, 2011 | Microsoft Xbox 360 Controller

1 Answer

Both controller switch off during gaming


hi!
are you using wireless controllers? if you are, then batteries might need replacing, they need to be recharged, or your charge and play kit might be having issues.
Have you noticed any strange behaviour in the gamepads' lights?
if these are wired gamepads, try using other cables (from a friend maybe)

Mar 06, 2011 | Microsoft Xbox 360 Controller

1 Answer

My xbox 360 controller won't work on my Pc, my pc does recognize the controller but just recharge the battery why? ( O.S win7 )


The Xbox 360 controller only works on a PC if you have the Xbox Wireless Receiver for the PC or if you have a wired Xbox controller. If you are using the Play-and-Charge cable with a wireless controller, it will only charge the battery.

Feb 16, 2011 | Microsoft Xbox 360 Controller

2 Answers

X box controller keeps turning itself off - I have put new batteries in


Connection problems might be caused by one or more of the following factors:
  • Weak batteries or a weak Xbox 360 Rechargeable Battery Pack
  • Interference from another wireless device, such as a microwave oven, a cordless phone, or a wireless router
  • Metallic objects positioned between the console and the wireless controller, such as a chrome faceplate or metal dividers, shelves, or doors on an entertainment center cabinet

    Note All licensed Xbox 360 console faceplates are tested for interference, and do not interfere with licensed wireless devices.
  • There are already four controllers connected to the console.
uparrow.gifBack to the top THINGS TO TRY Solution 1: Restart your console Turn your console off, wait a minute, and then... Solution 1: Restart your consoleTurn your console off, wait a minute, and then turn it on again.

If your controller is still not working, try the next solution. uparrow.gifBack to the top Solution 2: Replace the batteries or the Rechargeable Battery PackInsert fresh AA batteries, or attach a fully charged Xbox 360 Rechargeable Battery Pack to your controller. If you have an Xbox 360 Rechargeable Battery Pack
  • Remove the battery pack and reattach it to your controller, making sure that it is attached correctly.
  • Press and hold the Xbox Guide button. In the upper-left area of the Xbox Guide button, the battery meter indicates your current level of battery strength. You might need to recharge the battery pack, if the level is low.

    Collapse this imageExpand this imagecontlrftbtn.jpg

If you have an Xbox 360 Play & Charge kit
  • Make sure that the Xbox 360 Rechargeable Battery Pack is correctly connected to your controller and plugged into one of your console's USB ports. If you check both of those things but are still having the problem, try the suggestion below.
  • Plug the charge cable into each USB port on your console, one by one. There are two USB ports on the front of the console and one on the back. If the controller works in one USB port but not another, try another accessory in the USB port that did not work with the controller. If the USB port does not work with any accessory, your Xbox 360 console might need to be repaired.
  • Turn off vibration feedback (rumbling) on the controller. If you play games with feedback while charging, it takes longer for the controller to charge and might drain the battery pack faster than it can recharge. Here's how to turn vibration off.
    1. Press the Xbox Guide button on the controller.
    2. Go to the Settings area, and then select Preferences.
    3. Select Vibration.
    4. Select Enable Vibration to clear the checkbox.
If your controller is still not working, try the next solution. uparrow.gifBack to the top Solution 3: Remove objects between the controller and the consoleThe controller works within 33 feet (10 meters) of your console. However, objects placed between the controller and the console might reduce this range. In addition, objects that use wireless technology (for example, a cordless phone) can interfere with your wireless controller. Remove or relocate objects or wireless devices that might interfere with the wireless controller or console. Here are some things that can cause problems:
  • Microwave ovens
  • Cordless phones
  • Wireless routers
  • Chrome faceplates
  • Metal dividers
  • Shelves
  • Doors on an entertainment center cabinet
Note All licensed Xbox 360 console faceplates are tested for interference, and do not interfere with licensed wireless devices.

If your controller is still not working, try the next solution. uparrow.gifBack to the top Solution 4: Disconnect all controllers and headsetsIf all four rings surrounding the power button on the console are green but the controller has four flashing green lights, four controllers might already be connected to the console. Disconnect all of the controllers, and then try to connect the controller with the problem.
  • To disconnect a wireless controller, press and hold the Xbox Guide button for three seconds, and then turn the controller off.
  • To disconnect a wireless headset, turn the headset off.
  • To disconnect a wired controller or headset, unplug its cable from the console.
To learn more about connecting your wireless controller, please read the following Knowledge Base article: 906947 (http://support.microsoft.com/kb/906947/ ) How to connect an Xbox 360 Wireless Controller to an Xbox 360 console or computer If your controller is still not working, try the next solution. uparrow.gifBack to the top Solution 5: Replace your controllerIf your controller still does not work correctly, it might need to be replaced. Please contact Xbox support at the following address: http://www.xbox.com/support/contact (http://www.xbox.com/support/contact) uparrow.gifBack to the top Additional supportPlease visit the following Web site for information about how to contact Xbox support: http://www.xbox.com/support/contact (http://www.xbox.com/support/contact)

Dec 05, 2010 | Microsoft Xbox 360 Controller

1 Answer

How can i Get it to work on a computer?...It's not responding!


Sorry, the P&C kit delivers power for charging the controller only, no data is transmitted via the cable.
To use an XBox 360 Wireless receiver with a Windows PC, you need the "XBox 360 Wireless Receiver for Windows".

Oct 17, 2010 | Microsoft Xbox 360 Wireless Controller and...

3 Answers

"HOW TO" use xbox 360 controller on pc games


Most games support the gamepad by default. You should not need any software or setup. But you might need the Drivers for it... Check this out, hope it helps:

http://www.microsoft.com/hardware/download/download.aspx?category=Gaming&type=Gaming&sku=JR9-00001

Mar 31, 2010 | Microsoft Xbox 360 Controller

1 Answer

My xbox controllers will not charge with the plug in kit. The light turns red, then either immediately green, or it starts to blink red-off-red-off.


I had the same problem. The Battery pack on mine was dead for a long time as i havent touched my Xbox 360 in a while. So
SOLUTION
Step 1. Plug the play and charge cord into the controller
Step 2. If Light turns green within a minute or so, Unplug the play and charge cord and go to Step 1 (Repeating this process until the light stays red on the play and charge cord (3-10 times))

Oct 08, 2009 | Microsoft Xbox 360 Controller

2 Answers

My red xbox 360 controller wont charge with the included play and charge kit after i turn off my console, it works if i do it as soon as it dies but not if ive played for a little while and then turn it...


Basically an xbox battery has a built in 'memory' that it tells the xbox how much charge is in it and the problem with rechargable batteries is that if they're not used for a while and left at room temperature their charge begins to dissipate so when you plug it in the battery 'thinks' it's charged and tells the xbox the same when in truth it's not. What to do is keep plugging and unplugging the charger on top (waiting until the light comes on) until the charger light stays red (as opposed to going red then immediately green) the small amounts of charge put in each time will eventually give the battery enough juice to clue it as to just how much power it REALLY has in and will then start charging as normal.

Apr 25, 2009 | Microsoft Xbox 360 Controller

1 Answer

My controller wont turn on without the charger cord


Sounds daft cause you have probably tried already, but have you re-synced the controller?
1. Turn on the controller
2. Turn on the console
3. Press the sync up button on the console
4. Press the sync up button on the controller

Dec 01, 2008 | Microsoft Xbox 360 Controller

Not finding what you are looking for?
PC Game Controllers Logo

Related Topics:

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft PC Game Controllers Experts

Pablo Gonzalez

Level 3 Expert

733 Answers

LCRyan

Level 1 Expert

6 Answers

Lance

Level 2 Expert

118 Answers

Are you a Microsoft PC Game Controller Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...