Question about HP Deskjet F4180 All-in-One InkJet Printer

3 Answers

HP F4180, lights blinking - on/off, color, black, resume

Printer goes through normal startup procedure, then goes to lights blinking. plus "Start Copy" shows "E" as well.

Posted by on

  • Anonymous Jan 12, 2009

    Printer goes through normal startup procedure, then goes to lights blinking. plus "Start Copy" shows "E" as well.

  • vidhyavenkat Jan 18, 2009

    LIGHTS BLINKING,E DISPLAYED,PRINTER READY BUT NOT WORKING

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Good for you Lynndy, too bad you didn't tell WHAT method you used to get it working again.

Posted on Jul 22, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thanks everything worked.

Posted on Jan 23, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 45 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my HP F4180 the red light beside reume keeps blinking and I cannot print


Carriage jammed , check for that, if found any objects, remove to manually.if no objects observed might be service station strucked.. check it..If found difficulty, printer needs service..

Feb 02, 2012 | HP Deskjet F4180 All-in-One InkJet Printer

1 Answer

Hello, I have just changed the cartridge of black ink on my HP Deskjet F4180, and when I try to print, I get an error message saying "low ink". I have checked that it is put in ok, and I have...


1. Unplug the power cord from the unit.
2. Reconnect the power cord into the unit.
3. When the lights begin to flash, press and hold the On/Resume and Paper Size buttons.
4. When only the On/Resume light is flashing, release the buttons.

Mar 09, 2011 | HP Deskjet F4180 All-in-One InkJet Printer

1 Answer

I have problem my printer hp deskjet f4185,this problem is blink light color,black/photo,resume and power button. i have try on/off printer and disconnet cable.but i have same problem, and one more problem...


Hi Jeje,

The Printer has a fatal error. Please try the below steps, if it didn't work you have to service the printer.

Power Drain:

  1. Use the power button (c00636182.gif ) to turn the product off.
  2. Unplug the power cord from the back of the product and then unplug the power cord from the electrical outlet.
  3. Press and hold power button for 60 seconds (Discharges static power in the capacitors).
  4. Wait 60 seconds and then connect the power cord to the back of the product.
  5. Plug the other end of the power cable directly into a wall outlet. Do not use a power strip, extension cord, or surge protector.
  6. Use the power button (c00636182.gif ) to turn the product on.
  7. Try the print job again. If the lights still blink, continue with the next step.

NVM Reset:

  1. Remove the ink cartridges and close the door.
  2. While the printer is ON, unplug the power cable from backside of the printer.
  3. Press and hold "cancel" and "Start Color copy" button. While holding the button connect the power cable.

Regards,
Rizwan

Jan 19, 2010 | HP Deskjet F4180 All-in-One InkJet Printer

1 Answer

How to I access canon s600 ink pad


Start with the printer OFF

1. Hold down RESUME and then hold down POWER
2. Release RESUME
3. Press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing

Select function with RESUME press POWER to execute:
presses - light color - function

Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on s600)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter

Nov 13, 2009 | Cannon Canon i960 Photo Printer

1 Answer

HP Deskjet F4180 Color changes and lines in photo printing


HP always recommend that ink cartridge should be replace by original ink.

As this kind of scenario will occur if the ink will just be replace by a refill ink.

Sep 21, 2009 | HP Deskjet F4180 All-in-One InkJet Printer

1 Answer

Will not reset, light blinks 8 times


Hi there you can try this

Start with the printer OFF

1. Hold down RESUME and then hold down POWER
2. Release RESUME
3. Press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing

Select function with RESUME press POWER to execute:
presses - light color - function

Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i950)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter


All The Best Pineworks

Jun 04, 2009 | Canon I990 InkJet Photo Printer

1 Answer

Blinking lights and e on start copy


Have you tried re-booting your computer?

Apr 01, 2009 | HP DeskJet F380 All-In-One Printer

1 Answer

Initial installation doesn't work


Hi, check yr printer driver if it's ok then check photoshop install ok. or not.

Apr 01, 2008 | HP Deskjet F4180 All-in-One InkJet Printer

Not finding what you are looking for?
HP Deskjet F4180 All-in-One InkJet Printer Logo

Related Topics:

3,302 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...