Question about Franklin Industries Refrigerators
Where do I get it fixed--Granite City, Il
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First question, do you have power to the unit and the cooling fan is not working? If this is the problem then sounds like one of the two fuses in back panel has burnt out.
Posted on Feb 23, 2009
Maybe not the answer for everyone, but I proved it was the fan by removing the back panel, removing the fan and finger guard, then placing a small desktop fan that was the same size as the top-rear fan on the wine fridge. Pumping air directly over the heat sink allowed the unit to attain the temperature set on the front panel. The old fan would either not turn at all, or too slowly to be effective. These fans are junk. Especially after finding articles such as this out in different forums for the same issue.
I have the HVTS18DABB model unit and the replacement fan is a simple 120mm square, 25mm deep 12V DC fan. Similar or the same as you see in computer chassis. Found some inexpensive, high CFM, low noise fans from the following site:
Specific fan for my application was the model SY1225SL12SH. Although I did order a second fan that is similar in case the .5amps was too high and I popped a fuse. These fans are inexpensive folks, as long as you aren't afraid to get your hands dirty. Good luck.
Here are the details on my order:
Name Code Qty Each Options
Yate Loon 120x25mm D12SH-12 1 5.99
D12SH-12 High Speed -
Black (88 CFM, 40 dBA)
Scythe 120x25mm SY1225SL12SH 1 7.95 Add Black Sleeving = No
SlipStream SY1225SL12SH -
Posted on Aug 16, 2010
Thermostat failure in those is very common. One quick test is to bypass the thermostat. And if it runs, you need to replace it.
Posted on Dec 12, 2010
SOURCE: I have an everstar hdwc35,
It is a faulty thermostat not the control board An open thermostat defaults to a high value,
so it does not shut off. If it was a bad compressor, or low in freon,
it would not "get ice cold". If it is low on freon, the low pressure
switch would not let it start up.
The defrost timer either runs normally (cycles on and off cold) or is in defrost mode (heater elements turn on to temporarily heat the freezer in order to remove frost). Anyway, It is not the defrost timer if it "gets icy cold".
Posted on Jul 31, 2011
Tips for a great answer:
Sep 27, 2016 | Miscellaneous
Jan 17, 2016 | Home
Mar 04, 2015 | GPS
Feb 16, 2015 | Furniture
Oct 26, 2013 | Adhesives, Coatings & Sealants
Oct 16, 2013 | Dryers
Jun 28, 2013 | Kenmore 35 Bottle Capacity Wine Cellar
Jul 18, 2012 | Refrigerators
53 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: