Question about Karcher 2500 PSI Pressure Washer

1 Answer

Craftsman 4 hp 2150 psi pressure washer wont start

Springs broke and dont know how to replace them to get pressire washer to start. need schematics or manual or smoething

Posted by on

  • 2 more comments 
  • JERRY ABELL
    JERRY ABELL May 11, 2010

    hello mr j,you know you have two people trying to help you with problem we asked for more imformation so we can help ,but you don't know what the problem really is,what spring,where is the spring what is the model #,that sort of thing well good luck with whatever problem,

  • JERRY ABELL
    JERRY ABELL May 11, 2010

    hello mr J,sounds like you are talking about the spring on the carburator,if you let me know,brand,hp,model of engine i can help you,hope this helps.MrFixIt.

  • Thomas F. Schneider May 11, 2010

    Her is that product support website. They have both real and online places to buy parts from. Maybe they have illistrated drawings?




    http://www.karcherresidential.com/en/sup...

  • Thomas F. Schneider May 11, 2010

    Your product brand  support  site has manuals and troubleshooting Q & A. but I did not find any diagrams. 

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 14 Answers

Go to www.karcher.com ,click on your region and then click international. Enter the model of the machine or the type number . That is is the first 8 digits of the number under the barcode. This will take you to the parts listing for your machine.

Posted on Mar 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a champion Power Equipment 6.5 hp Pressure


I don't know the brand name "Power Equipment" - but most 6.5 HP pressure washers run between 2500 and 3000 psi.

Oct 11, 2014 | Garden

1 Answer

Can a pull cord be replaced on a briggs & stratton 2300 psi gas pressure washer


yes take the top cowling cover off that houses the pull start normaly 4 to 6 bolts around the lower edge of this & you can pick this cord up from most diy stores or tool rentle firms just be carefull when the cowling is off that the cord spool/pully will most likely be under spring pressure unless the cord as broken completley hope this helps

Aug 16, 2014 | Garden

1 Answer

Do the spring end caps inside the 315747GS unloader valve face the spring or the ends of the valve


This parts diagram for the pump should answer your question http://lawnandgarden.manualsonline.com/manuals/mfg/craftsman/580751651.html?p=22

Jun 08, 2014 | Craftsman 2500 PSI Briggs & Stratton...

1 Answer

After the winter my motor runs fine but no water pressure


Did you drain the pump in the fall? Cracked housing or blown gasket.

Apr 22, 2014 | Garden

1 Answer

Why will water not flow through hose into the spray gun with the washer not started as well I started the power washer and the water still does not come out.


My Craftsman pressure washer has a filter in the hose tp the pressure wand. I found I must have had some dirt in my garden hose and these filters were plugged. No pressure at all till I cleaned them out.

Jul 04, 2017 | Craftsman 2500 PSI Briggs & Stratton...

1 Answer

Need throttle sping help


Take spring to local harware or home improvement store (Ace, Lowes, Home Depot, etc.) and get a similar spring.

Jun 07, 2009 | Karcher 2500 PSI Pressure Washer

1 Answer

No water pressure


There is a injector valve in the water pump that is sticking. Remove this valve, grease the top o-ring and reinstall. Problem solved. Use pump guard in the future to prevent this problem from reoccuring.

Mar 22, 2009 | Karcher 2500 PSI Pressure Washer

4 Answers

Lack of pressure


My air compressor builds up to 40 psi and just keeps running, i have a craftsman 5 GAL, 1HP, 125 PSI and pressure goes up to 40 psi and dose not go any higher and on the other hand engine keeps running and dose not stop. Please advise?
Thanks.
Kia

Oct 25, 2008 | Craftsman 3 gal. Air Compressor, 1.5 hp,...

1 Answer

No pressure


Replace the bypass valve, this is the most common problem. Failing that remove high & low pressure valves and ensure they are not blocked or worn

Aug 06, 2008 | Karcher 2500 PSI Pressure Washer

Not finding what you are looking for?
Karcher 2500 PSI Pressure Washer Logo

Related Topics:

1,000 people viewed this question

Ask a Question

Usually answered in minutes!

Top Karcher Garden Experts

John Trevino

Level 3 Expert

1388 Answers

Harold Baxter

Level 1 Expert

4 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Karcher Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...