I have an intec wireless controle (G7782) for play station 3. I did all the stuff it tells me on the instructions and it dosent work. Do you no the problem??

It's not meant for the pc, but instead for the ps3.

Had a similar problem with an official Sony Dual Shock 3 recently. Turns out the solution was a very small pin hole sized reset button on the back of the controller. Have a look and see if yours has something similar, then try connect the charging cable again and sync. Worked on the official one for me anyway :/
Best of luck!

If the wireless remote has a USB plug, the remote has to be temporarily connected to the PS3 to physically sync. Once that is accomplished, the remote will always work.

Plug the USB cable that came with the controller into the PlayStation 3.

Plug the other side of the USB cable into the Intec controller.

Press the PS button on the controller. This links the controller to the PlayStation 3.
Any further questions don't hesitate to ask. thanks
A good vote would be awesome!

It should be as easy as plugging in the controller to the PS3 unit by using the usb cord and then pressing the PS3 button on the controller. That's how the original controller works.

Good luck.

I believe that it's a typo. You can only use turbo on one button at a time. Try it.

Press and hold the Turbo button, and press the button you want to use turbo with. If it doesn't work, your controller could be faulty and you may have to return it.

Play Station 3 wireless (Intec) controller will not ''link'' to PS3 Console

just plug it in it will charge even if the concel is off please rate

lightly adjust the USB in the system with it on and keep pressing the home button

Chris

Maybe your controller needs a cleaning or the game doesn't work with wireless controllers. Check your game instruction manual.