Question about Projection Televisions

1 Answer

Re tv Hi i recently used you guys for support with a tv,i'm doing ok so far but have up with a minor problem nothing major but don't want to damage anything.there are 3 white jumpers going across from board to board,i know they shld unclip but not real sure how.should they just pull up from one side with your thumb.sorry better ask a dumb question. regards Mark. grubby30@yahoo.com.au

Posted by on

  • 1 more comment 
  • grubby30 Jan 11, 2009

    Thanx mate for your help,but i have worked it out from other guides from your site.this is a great site to get help.thanx again.

    regards Mark

  • grubby30 Jan 12, 2009

    this is the board of the panasonic tx-51p15 series rear projection tv.regards Mark

  • Louie  Role
    Louie Role May 11, 2010

    Hi and welcome back to FixYa,

    Initially, postback for the brand and model number. Additionally, identify the board(s) and connector/jumper number or post a photo of the board(s) & connector(s)/jumper(s). Pls limit the image file size to 150kb or lower.

    Pls post back as requested. Good luck and Thank you for using FixYa again.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Congratulations, there is always a particular joy when doing something with your own hands. It may not be artistic, it may not be perfect, but it is worth all the time in the world.

Posted on Jan 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do u replace a IC convergence on a mitsubishi 65 tv


Hi,
if you guys don't have experience or the right tools to fix board you will mess up your board.
so go to ebay and search for repair service listing #230735864835 and sen your board to this guy for convergence repair.
let a professional do the job for you and for cheap,why buying repair kits when you can buy the repair service?

Jun 18, 2012 | Mitsubishi WS-65809 65" Rear Projection...

2 Answers

TV Won't Turn On - Timer light flashing continuously


Well for the first guy, it would seem something came loose while moving it. Trace your power circuit to find the ecaxt problem, as well as inspect your fuse.. I'm sure its something simple and since it wont come on it has to be that it aint getting power..

For the second guy,, the reson why he baked off and said call the manufacture is caue you proberally need a MAIN BOARD... I would suggest you take it to a secon technician first and herr what he has to say before calling the company for they to tell you,,... you have to buy a mainboard and it will cost you some money ...

Jan 14, 2008 | Mitsubishi WL-82913 82" Rear Projection...

1 Answer

What happened when TV is blurry with double vision and picture is not linear


Good day!

First of all,before you proceed to the minor/major troubleshooting try to check first the cable signal and connection of it,if you are cable subscriber or play any movie to your TV to make sure that the problem is on your TV or on the signal.

If you already play the movie and the problem is still there.


follow this procedure of troubleshooting to fix that problem:

  1. Remove the back cover by loosening all screws.
  2. After you open the cover,look for the convergence I.C-it is the one that have heat sink and stand on vertical position.The part # of that I.C is usually starts with the letter STK####.
  3. That convergence I.C controls the images and graphics.Replace it and check the resistors and other components near that I.C.Use a soldering iron and soldering ****** to replace the parts or components and multimeter tester (range on resistance).
  4. If you already replace the convergence I.C and check some component near that.Plug-in and power ON again to test if it is successful.
NOTE: Always double check the solder parts when you replace any parts or components to avoid short circuit or major damage.

I hope this solution will be helpful to fix your problem.Thank you and good luck.

Apr 27, 2011 | RCA D52W23 52" HDTV CRT TV

1 Answer

I have a 46" rear


Ok, well I would ask how a wii remote found itself in a TV, but things happens anyways..... Ummm, these does not seem minor and might result in buying a new TV.... or Warranty?? Does it still turn on and the picture comes up ok? If so, then you are ok.....

Jan 08, 2011 | Sony Projection Televisions

1 Answer

If your unit get hit by lighting will it be any good


It depends if you got a direct hit by lightning, they are either minor repair or major Damage .

Sep 28, 2010 | Projection Televisions

1 Answer

My 62 inch mitsubishi tv was hit by lighting


Try to find a local repair centre & ask if they can give you an estimate on the cost to repair. A lightning strike can cause either minor damage such as just an internal fuse blown or can cause severe damage which will wipe out entire circuit boards which can be a costly repair. In this case it's usually not worth repairing.

Oct 07, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

NEED TO REPLACE BULBS IN mITSUBISHI VS 45607 cAN NOT FIND THEM


This doesent sound like a bulb problem to me at all! it sounds like a few capaciters need replaced! Look put the screwdriver down and call a pro because you could ruin the set trying to do a minor fix and causing a major problem!

Dec 11, 2008 | Mitsubishi VS-45607 45" Rear Projection...

1 Answer

Having a problem with my Sony KP-46WT510 46 in tv


Very minor. Horizontal deflection is stopped Q8035 or Q8038 on the D board is defective. Change both just to be sure. If you need more assistance let me know.

Jul 04, 2008 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Rear Projection and PlayStation 2


Hi, If your PS2 has an RF module, it is possible that the PlayStation 2's RF unit is interfering with your reception. Even if you are using the Audio/Video OUTput of the PS2, the RF module is also working and throwing out an output to either Chs 3 or 4. By switching off the PS2, the RF module would likewise be off. If by switching off the PS2 does not solve the problem, it is also possible that the Video input board of your TV has been slightly damaged. I doubt if it is a major repair and offhand would probably involved minor components or simply re-soldering. Hope this be of some help/idea. Post back how things turn up or should you need further information.

Sep 16, 2007 | RCA P52926 52" Rear Projection Television

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...