Question about Brother Hl3070cw Hl-3070cw Color Laser Printer

Open Question

How do I get my brother HL-3070CW to print bordreless?

I cannot get my printer to print borderless copies of various projects such as cards, calendars, ant etc. I have changed thee page setup on my projects, but cannot change the borderless printing on the Brother printer.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 286 Answers

SOURCE: Brother MFC-5440CN Printer Problem

If this only happens when you are copying.

1. Your scanner glass is dirty. Open the lid, use windex to clean the flatbed. Look on the left side. You should see a strip of glass, with the scanner sitting under it. This strip is used when the document feed is being used. Make sure it is clean. Most common problem is getting a little whiteout or the sticky residue from scotch tape on this glass, which causes lines down your copies.

Clean it with alcohol which will dissolve the sticky stuff and the whiteout.

If this does not solve the problem, the CCD scanner in your machine might be going bad.

Posted on Dec 30, 2007

  • 108 Answers

SOURCE: Brother HL 1440 Printer Density Adjustment

Go to Printer and Faxes and select the properties button, then select the maximum dpi in the Advanced tab. You will get the best quality Print

Posted on Feb 08, 2008

  • 1 Answer

SOURCE: Brother Intellifax 1820c fax machine: Won't print incoming transmissions

How do you fix the error 41 that keeps showing up

Posted on Feb 14, 2008

  • 1 Answer

SOURCE: Brother HL 2040 Printing problem

ต้องการไดร์เวอร์printer hl 2040 คะ

Posted on Oct 16, 2008

  • 66 Answers

SOURCE: My Brother HL-20 laser printer

All laser printers have 2 cylinders in the image..the mag roller, and the drum.
Usually the drum is marked by a foreign object  e.g label or someone has touched it with their finger.
If you replace the cartridge your problem should go away 

Posted on Dec 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why do I have yellow horizonal lines on printed page


Sounds like a faulty toner cartridge. Are all the cartridges OEM?

Jun 16, 2017 | Brother Hl3070cw Hl-3070cw Color Laser...

1 Answer

Brother HL-3070CW burning smell


Did you run labels or paper the is not compatible with laser printers?
A label may be stuck on the fuser. There's not much you can do unless you know how to remove the fuser.

Oct 08, 2013 | Brother Hl-3070cw Digital Color Printer...

1 Answer

Printer HL-3070CW - LOUD Grinding noise when it seems to be running large print offs. It is almost like it gets too hot


My 3070CW makes the same noise. It is caused by the transfer belt. One roller is driven by a cog and this goes fine. The other roller has a tensioner and this roller is making all the noise. While the noise is really loud and annoying - it is completely harmless. Hope this helps.

Aug 09, 2011 | Brother HL 5250DN Laser Printer

1 Answer

How do i reset my printer? it always shows a LOW TONER, even though it was newly refilled. There is also a vertical line that appears on the side everytime I copy something (photocopy).


Step 1: Toner Reset Menu for Brother HL 3040CN and HL 3070CW
1. Open Cover where you can access toner cartridges
2. Press CANCEL & SECURE PRINT buttons at the same time and you'll see
the toner menus on the screen
3. Press + or - to navigate through to the toners you need to reset.
Note that each toner has 2 entries here, reset them both (STD means Standard, STR means Starter)
4. The OK button will reset of the toners.

Apr 18, 2011 | Brother DCP 9010CN - multifunction ( /...

1 Answer

Our brother printer wireless hl 3070cw will not print, it is telling us that it is ready but will not print


it would have print archive in its job print .. check and delete . or install printer again .
i hope it shall work .,

Mar 29, 2011 | Brother HL3070CW Compact Digital Color...

1 Answer

Brother HL 3070CW says the toner is low and won't print. It has toner and I have to get something printed for a client


I done on my brother lh3070cw printer cartridge on Message "Low Toner"

First I take off toner cartridge
second - Covered the both Glass Buttons of Cartridge situated right and left side of cartridge (all cartrideg) for Black Electric Tape.

thent install the cartridge in the printer again.

after install the cartridge press SECURE PRINT AND CANCEL BUTTON SAME TIME AND CLEAR THE STR AND STD FOR PRESSING ok BUTTON FOR 2 TIME.
ERASE EACH STR AND STD
THEN PRESS CANCEL

YOU CAN USE YOUR PRINTER FOR END OF THE TONER

Mar 28, 2011 | Brother MFC-9440CN Laser Printer

1 Answer

We have 2 Brother printers (mfc-9880 and MFC-8860dn both on a LAN)and have just added a hl-3070cw also on the same LAN. The 2 MFC have always appeared on ''My Network Place'' but the new HL does not and...


You have to setup that printer from all clients as a network printer again... from each client, and print a test page from each too. Sharing must be enabled also, it must be installed with latest drivers, for whichever system.. Just set it up correctly and all will be good.

Mar 02, 2010 | Office Equipment & Supplies

1 Answer

Borderless printing kodak 5500, clear coating business cards


Go to printing preferences of the particular program and then select Borderless . THESE ARE THE SIZE OF PAPERS SUPPORTED IN Kodak printers.
  • 3½ × 5 in.
  • 4 × 6 in.
  • 4 × 8 in.
  • 4 × 12 in.
  • 5 × 7 in.
  • 6 × 9 in.
  • 8 × 10 in.
  • A
  • A4


May 07, 2009 | Kodak ESP 5 Printer

1 Answer

Spots on copy


Clean carona on drum. blue slidy tab, sounds like you are using non brother toner is that correct? Replace with OEM, Can also be worn drum

Dec 26, 2007 | Brother HL-2040 Laser Printer

Not finding what you are looking for?
Brother Hl3070cw Hl-3070cw Color Laser Printer Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

James Cagle
James Cagle

Level 2 Expert

453 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...