Question about Zenith B27A11Z 27" TV

Open Question

Zenith sentry 2 won't power on by pushing power button

I just bought this tv. got it home and plugged it in. acts like its not drawing any power. i push the power button and nothing happens. i let it warm up for over an hour before attempting to turn it on again. still nothing. any ideas

Posted by on

1 Suggested Answer

budboytn
  • 15 Answers

SOURCE: Zenith 27 Inch Sentry 2 i think

yes let me know if you still need help on this one it is in factory defalt, i will look up service manual and let you know the codes to make it a regualr tv again, they have it set to display setting.

Posted on Feb 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Help me guys regarding my home tieter pioneer model xv-dv 272 .my problem is When I open my player the display is only oc error1 I don't know what kind of error code is this help me guys pls reply


Unplug the power then hold the power button down and plug the unit in again to reset it. If not this is probably a component fault.
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 03, 2017 | Pioneer Televison & Video

1 Answer

Zenith dvd5201 tray won't open. How do you remove case to release tray? I have unplugged and replugged and then held open/close for 5 seconds without success. I don't have local repair.


It sounds like the drive belt is slipping or a disc stuck.
Open the lid and send us pictures
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 02, 2017 | Zenith DVD5201 Multi-disc DVD Player

1 Answer

My factory DVD player will except disc the ejects it


If I understand your rather cryptic post correctly...

This very well could be a Blue-Ray disk loaded into a
non-Blue-Ray capable DVD player. Your car player's capabilities MUST match the disc, otherwise, the disc won't play.

I've run into this very same problem with my home DVD players. Which both are non-Blue-Ray capable, but I was able to verify the Blue-Ray discs on my PC.

Jan 02, 2015 | Televison & Video

1 Answer

Can't switch off tv


All tvs draw a current so long as they're plugged in, this is what allows a remote device to power them on. Modern tvs will generally have a light to designate this (I think this is what you're referring to as standby). The only way to cut the current to your tv would be to unplug it or if it's connected to a surge protector, switch that off.

Jun 28, 2014 | Televison & Video

1 Answer

How can i turn on my tv without a remote?


It would be helpful if you told us WHAT KIND OF TELEVISION you're trying to turn on. Perhaps there is a POWER BUTTON on the front of whatever television you have?

May 24, 2014 | Televison & Video

1 Answer

How do i fix my elonex tv


switch off.wait for 5 mins.
press & hold power button till it turns on then off.
ifno luck try this-
switch on by pressing power button while holding volume + and -.
keep hold of both until powers on.
can take few mins.
good luck!!!

May 04, 2014 | Televison & Video

1 Answer

Would like to know the codes for a LG tv, Sony tv, and a TOSHIBA DVD ?


How to Program


Remotes With SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press "SET" Hold until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


Remotes Without SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press and hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed, at the end of the 4th digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


MAGIC SEARCH FUNCTION
1. The magic search function enables you to scroll through the entire code list one by one by pushing the on/off button. Each time you push the on/off button the remote automatically switches to the next code in the list and sends a signal to the device you have chosen.
2. Choose and press a device key i.e TV. LED will flash once.
3. Press and hold the SET button or if no SET button then hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
4. Enter the 4-digit Device code (refer MAGIC list) i.e TV is 0001.
5. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process.
6. Start scrolling by pushing the ON/OFF button as soon as your TV or Chosen device turns OFF lock the code in by pushing the DEVICE key again.

Mar 27, 2013 | Televison & Video

3 Answers

Need instructions to add TV button to AKB36157102


1. While pressing and holding down the TV POWER button, press the CHANNEL UP or CHANNEL DOWN repeatedly until your TV is turned on (or turned off if you had it on). 2. Release TV POWER button when the TV turns on or off. The remote's TV POWER button will now control the TV.

Jul 19, 2009 | Televison & Video

Not finding what you are looking for?
Zenith B27A11Z 27" TV Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71705 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2294 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...