Question about Winsource Tech Solutions TS-4500 Cross-Cut Shredder

1 Answer

Need parts for my techsolutions paper printer TS 4500

Are there any parts in USA?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 58 Answers

This is how a got my hard to fine gear!

Contact Michael Business Machines for your local dealer 1-800-223-2508

Good luck, Tom

Posted on Mar 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TS3300 PAPER SHREDDER. I NEED THE SWITCH CABLE COMBINATION


where can i buy a gear for my paper shredder model ts 3300

Apr 26, 2010 | Tech Solution TS-4500 Shredder

3 Answers

Where do I get a gear to turn the shredder


Her
From: NVTSHREDDER@aol.com
Date: Thu, 9 Jul 2009 11:16:33 -0400
Subject: TS4500 from Winsource Ind.
To:



Rick,

This TS4500 shredder had been discontinued for more than 5 years. The factory did not make any spare parts for this model.

Thanks,

Victor
Customer service

e is my response

Mar 22, 2009 | Tech Solution TS-4500 Shredder

1 Answer

Techsolutions TS-8000 runs continually when switch is on. Normally you need to feed it to start is in the on position


I have a TS2500 and it behaves in a similar fashion. It sounds like you may have a paper jam keeping the paper sensor switch turned on. The first thing to do is make sure that the container that collects the shredded paper isn't full. Everytime I fill mine up I have this problem. Emptying the bin and pulling the shredded paper from the bottom of the unit usually allows it to automatically shut off. If that isn't enough, make sure that you don't have a paper jam in the cutter rollers. The most important thing you can do is make sure the unit is unplugged before doing anything with the shredding mechanism.

Hope this helps.

Dec 09, 2008 | Tech Solution TS-4500 Shredder

2 Answers

Paper shredder


The only solution with respect to safety is to order a new switch from the companuy that manufactures/sells this shredder, and mount it according to the manufacturer/sales company's instructions.
If you want to bypass the safety of the machine, just keep the cables (should be 2, + eventually a ground cable) open, or shorted, depending of the machine's configuration. Remember that this is on your or your collegaues own risk!! A shredder can easily bite your finger off!

May 19, 2007 | Tech Solution TS-4500 Shredder

1 Answer

Need to re-adjust the paper sensor switch


I have one of this model. You can see 6 holes with screws in them. The 7th hole is under the serial number paper tag near where you see a deformity of the plastic. I have not taken it apart & I don't know if the sensor is adjustable.

May 22, 2007 | Tech Solution TS-4500 Shredder

2 Answers

TS4500 Shredder


there is one screw under the s/n sticker

May 08, 2007 | Tech Solution TS-4500 Shredder

Not finding what you are looking for?
Office Shredders Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Winsource Office Shredders Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

quennie732

Level 2 Expert

393 Answers

Jim Keysor

Level 2 Expert

307 Answers

Are you a Winsource Office Shredder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...