Can't eject dvd's.It says"LOCKED'How do you unlock to eject dvds
The cable co. Time Warner hooked up a new DVR to my tv.Since then my JVC digitlal TH-C6 has become locked and my dvd's will not eject The reading shows"LOCKED".I don't know how it got that way this is the first time this has happened. Please help .
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you are unable to get the tray of the dvd player open either the player will have a hole in front for you to stick a (I use a straightened out paper clip) into and press in towards the dvd player. It will manually open the drive so you can retrieve your dvd or there will be enough of a lip on the tray door you can grab it and pull it open manually. Then I would try unplugging the player and waiting a few minutes and plugging it back in and you might get lucky and it may never happen again. Good luck . Hope it works.
If there was a dvd in the tray and the cable guy moved the dvd player, there's a good chance the disk might have slid off the tray and is now blocking the tray from opening. Also if the machine was moved there is a good chance the tray/laser lock might be on. It is a switch or button located on the bottom of your dvd player. Check your manual for exact placement. It is built in for shipping purposes so they don't get broken from rough handling. Hope this helped!
On the unit, press the stop button and the cd eject button at the same time. The screen will say locked still. Release them and press them together again at the same time. The screen will now read unlocked. You can then eject the cd.
Here is my setup.
1) Separate DVD player
2) Separate VCR
3) Digital to Analog Converter box
4) Analog TV
5) Rabbit ears (UHF/VHF) antenna
The antenna goes into the converter box.
The RF-output of the converter goes into the RF-Input of the VCR
The DVD output goes into the front input jacks of the VCR
The VCR RF-output goes into the TV RF-Input
The VCR Line output goes into the front of the TV
To watch DVDs, we turn on the DVD player, turn on the VCR, and set the VCR channel to L2, and tune the TV to channel 3. The converter is off.
To auto record on the VCR, the converter must be tuned to the station being recorded. The converted must be turned on, the TV can be off.
To watch VCR tapes, turn the TV and VCR on. The TV is set to channel 3. Just press play on the VCR.
To Watch TV. Turn the TV and converter on. The TV is set to channel 3. Change the stations using the converter.