Question about Dyna-Glo (PPH16-LP) Utility Heater
There is plenty of propane and all connections are good. New regulator and parts.
Bypass the sensor with A jumper wire to test the sensor If it lites properly the sensor is bad.The sensor is probably in the bottom.
Posted on Jan 17, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: dyna glo workhorse heater
you need to pull top cover off. And bend the igniter in to the spray of fuel and check the gap of the ignighter to 3.5 mm and bingo should work i just bought one and had to do this to it
Posted on May 06, 2009
make sure you have the gas valve knob on turned to pilot while pressing that down while pushing the spark it should light or it is tripped on a safety like rollout switch or oxygen depletion sensor if equipped which all ventless heaters are
Posted on May 12, 2009
Tips for a great answer:
Jan 12, 2016 | Heating & Cooling
Nov 09, 2010 | Dyna Glo "" Natural Gas Heater Mn200tba
Nov 08, 2010 | Dyna-Glo Heating & Cooling
Dec 04, 2009 | Dyna-Glo Heating & Cooling
May 12, 2009 | Dyna-Glo D-E37 Wall Mounted Panel Heater
Feb 28, 2009 | Heating & Cooling
Dec 08, 2008 | Dyna-Glo Heating & Cooling
Nov 03, 2008 | Desa International Blower Glow Warm Wall...
Nov 03, 2008 | Desa International ALL-PRO® SPC-85 Utility...
749 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: