Question about Numark iDJ2 - DJ iPOD Mixer Docking Station

3 Answers

Idj2 stutter start button

Sometimes i have to push the stutter start button a couple times before it works on both A & B decks

Posted by on

  • planetjour Apr 14, 2009

    I have the same problem. Last night I disassemble the un it to inspect. Nothing seem wrong, I think that the rubber buttons are the problem.

  • bk bon vie May 08, 2009

    even after the song is fully loaded, sometimes you have to press the play button really hard and from different angles to get it to start. is there some way to clean or calibrate the play button?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have this same problem. I haven't found a solution anywhere, but a great workaround is using the Fader Start function - basically the moment the fader is slid into the main mix, the deck which you enable will start to play the tune. Hit the mode button, then select control, and turn on Fader start. It's actually really cool and allows you to do some ballsy mixes :) The deck will pause (or cue depending on the setting) once you bring it back.

Posted on Jul 14, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I has the same problem with deck b on one I bought off eBay. The problem turned out to be the micro switch which us under the play button. I disassembled the unit (took ages) and swapped the play switch with the queue one (which doesn't get used as much).

Posted on Jan 07, 2013

  • Johny Vanvoorden
    Johny Vanvoorden Nov 06, 2013

    Do you remeber the price of this component?

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Isn't the track loading when you hit the stutter start button the first few times? While it's loading, you can't start that song.
Koen

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Phillips 42PF7320/79 Flat Panel TV won't turn on, screen stays black but green pwr light is on, after a lil while the green light flashes a couple of times then goes off itself completely


This idea may be worth a try. Look at the buttons on your remote. If you see a button that is marked "TV" give that button a push and then give the "Power" button a push. Wait for a while! sometimes this takes a while to turn the TV on or off. You may have to do this a couple of times depending if the power was off or on when you started doing this. If you started with the set off, sometimes it takes a while for the set to turn on.

Jan 04, 2015 | Televison & Video

1 Answer

Dryer intermittently not starting.


The rat chewed up the power line and caused it to short out. Kill the rat!

Jul 14, 2013 | Whirlpool Dryers

1 Answer

Nordic c1900 belt stops after a couple of minutes


please lube the deck belt with silicione or wax read your manual. See the video attached. If after you lube the problem remain. Time of replace the deck belt board completely.
God bless you

Feb 16, 2013 | Exercise & Fitness

1 Answer

Yellow Check Engine light and red car with ! in the middle came on at the same time. Car Stuttered and died.


since the car is a 2010, take it to a dealer. should be under warantee if its a 2010 with less than 36kmiles.

Sep 13, 2012 | 2010 Nissan Altima

1 Answer

The belt is stuttering on treadmill when walking on it


1) LUBE the deck belt, this happen to due the lack of maintenance according with your instru.manual follow the step donwloa your instruction manual. go www.fitness.manualsonline.com or www.iconservice.com

2) LUBE the rollers bearing very well.

3) Tight with NOT much tension the drive belt.

4) Adjust the tension deck belt see the diagrams attached.
9_3_2012_2_21_52_pm.gif9_3_2012_2_22_15_pm.gif

Sep 02, 2012 | Exercise & Fitness

1 Answer

Numark IDJ 2USB Flash Drive issues


use the lexar brand jump drive, they tend to work better the the dj station. i have a 64GB jump drive with 3,000 songs on it and it works great with no problems.

Jun 21, 2012 | Numark iDJ2 - DJ iPOD Mixer Docking...

1 Answer

I have an Intermatic 24hr. Dial Time Switch box (mod.T104R) that is connected to my in-ground spa by a pneumatic with a rubber push button located on the spa deck. I pushed the button a couple of days ago...


You have 240Volt T104 Intermatic timer.
The clock works, and the spa works so voltage to the timer and spa are good.

You have push button control located on spa, and it stopped working.

1) The push button does NOT control the timer. T104 is mechanical timer, and the push button cannot activate the switch contacts, and there is no solenoid inside the timer that gives that option.
The push button is a separate problem from the timer.
So replace the push button.
Example push buttons at Grainger:
http://www.grainger.com/Grainger/wwg/search.shtml?op=search&N=10866&in_dim_search=1

2) Timer problem.
What does the timer do?
If you have a push button, why do you need the timer?
T104 is mechanical single-channel non-electronic timer, and cannot override the push button once the push button is OFF. They make industrial timers that can perform multiple functions, but T104 is not in that category.
This makes me think the timer dial does not have trippers mounted on the dial, or the trippers are worn down.
Maybe the timer function is by-passed. Maybe all wires are on terminals 1 and 2.
Check how the timer is wired, and then add a comment.
http://waterheatertimer.org/How-to-wire-T104-Intermatic-timer.html

Aug 24, 2011 | Intermatic T104 24h 208-277v Mechanical...

1 Answer

Sometimes External drive mounts on IDJ2... Sometimes it wont... Drive lights up each time... BUt will work for a couple days... Then wont work... Its a seagate Freeagent drive... 750gb


I spoke with Numark regarding intermittent cutting out of 750g Seagate hard drive. They claim the problem is with the size of hard drive and recommend using nothing larger than 500g. Bit of a shame really. Surprised no firmware upgrade to incorporate newer storage solutions.

Jun 28, 2011 | Numark iDJ2 - DJ iPOD Mixer Docking...

1 Answer

Only a couple of the program/adjustment buttons on my Pro-Form 930i treadmill work. Sometimes I can push random buttons and the rest of the buttons start working for a few minutes, then after a few minutes...


It sounds like either the function pad or the upper electronics is starting to fail. Also it maybe a loose connection between the function pad and upper electronics remove the upper console and inspect the connections. If you need to replace the parts sometimes with Icon products they are either separate items or they are one complete unit, you will have to call them @ 1-800-999-3756.

Jun 10, 2010 | Proform Exercise & Fitness

Not finding what you are looking for?
Numark iDJ2 - DJ iPOD Mixer Docking Station  Logo

Related Topics:

565 people viewed this question

Ask a Question

Usually answered in minutes!

Top Numark Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4943 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Numark Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...