Question about GE 29484GE2 Corded Phone
Can anyone tell me how to get the light to go off on line 1? The remains on at all times and NEVER goes out so it's hard to tell when you have someone on hold. Also, whenever I pick up the phone it automatically goes to line 2 instead of line 1, any ideas on this?????
SOURCE: ge 29385 corded phone
No need to set anything. Call that number from a different phone and it will automatically set!!!! I just found that out by accident. It would have been nice if they put that in the manual.
Posted on Jun 05, 2008
Here are the quick instructions on how to program the phone numbers.
You can also download a copy of the User's Guide from: http://www.retrevo.com/search/v2/jsp/downloadPage.jsp?doc=c96e9c823d0df43989039e5385bef04a&q=GE+29322GE1
Just enter the 4 digit captcha code and you will be able to download the User's Guide.
Please let me know if yo have any questions.
STORING A NUMBER IN MEMORY
To program priority keys:
1. Make sure the telephone is properly installed. Pick up the
handset and listen for the dial tone. If you don’t hear the
dial tone, recheck or repeat the installation steps.
2. Press the SPEAKER button or pick up the handset.
3. Press the store button.
4. Dial the number to be stored.
5. Press the store button again.
6. Press the A, B or C button.
7. Press the SPEAKER button or hang up the handset.
To program frequently called numbers:
1. Press the SPEAKER button or pick up the handset.
2. Press the store button.
3. Dial the number to be stored.
4. Press the store button again.
5. Press one of the 10 memory location buttons 0-9.
6. Press the SPEAKER button or hang up the handset.
Posted on Aug 12, 2008
first : go through settin up your phone with the manual( as much as im directing to manuals that much im staying out of my own way ) :) succes
Posted on Oct 22, 2008
I suggest you to get that phone manual from here:
You'll get your answer there Good luck
Posted on Mar 03, 2009
SOURCE: GE 2-9450 CORDED PHONE PROBLEM
I bet the problem is that you used to have two phone lines and now you only have one line. You cannot program an extension into one of these phones unless both Line1 and Line2 coming into the phone are working- it will act as if the extension you picked is in use, but the actual thing it is complaining about is that Line2 isn't working. The phones might have been working for years on a single phone line as long as they didn't lose power. But you don't have to throw the phones away just because you gave up your second phone line, you can still make them work. (I did it for a 12 phone system.) The way to to it: make a special cable that connects your single incoming phone line to both L1 and L2 on the phone, tricking the phone into thinking both L1 and L2 are working. Then program the extensions into the phones, and go back to using a normal cable so that only Line1 is hooked up. To make this cable: take a normal male to male cable and cut off one end. Then connect both the black and the green wires of the cable to the green post in a standard phone jack (the kind you would surface mount on the wall will work best), and connect both the yellow and red wires to the rec post inside the phone jack. Now plug your incoming phone wire into the phone jack, and plug the wire you connected into the jack into the back of your phone. The phone is probably already blinking red on the intercom, just push the extension number you want it to have, making sure there are no conflicting extensions already in use.
I would reconnect the phone using a normal line so that only Line 1 is "hot", don't leave it on this double-connected cable any longer than you need to in order to program the extension.
Posted on Dec 31, 2010
Tips for a great answer:
May 24, 2011 | General Electric 25982 5.8 GHz 1-Line...
Dec 27, 2010 | Panasonic KX T7220 Corded Phone
Jun 16, 2009 | GE 29484GE2 Corded Phone
Aug 29, 2007 | GE 2-9450C Corded Phone
May 17, 2007 | GE 2-9450C Corded Phone
26 people viewed this question
Usually answered in minutes!