Question about HP Compaq ProLiant ML370 G3 Server
Hello here is a problem similair to yours:
Here is the support site for the server:
(If you have entered the right product)
The manual site:
Some of the files is in the pdf format and you need adobe reader.
Posted on Nov 29, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Are you attempting to boot from the Windows CD?
If you are booting the server from a Windows installation disk and it is unable to detect the hard drive, this typically means the following things.
You need to provide the driver for the RAID controller of the server (this can vary, depending on the version of the ML370 e.g. G4/G5)
If it still cannot detect the hard drive after providing the driver for the RAID controller or if there is not a driver available for NT4, it may not support the controller.
In this case you can remove the RAID set by entering the RAID setup (could be LSI or adaptec). NOTE THIS WILL DESTROY ALL DATA ON THE DISKS THAT ARE A PART OF THIS RAID SET.
Posted on Dec 28, 2008
Hi there pls confirm whether you have tried to uninstall the network adpter and then restart ,or if physically the network adpter is installed in the PCI slot then change the slot and then reinstall I think this should workout or else the firmware for the server can be obtained frm HPupgrade with all the precaution as mentioned
Posted on Jan 24, 2009
Check if the processor fan is running properly. Also check the RAM modules, as these could sometime cause the machine to hang.
Posted on Aug 04, 2009
instead of using the KVM use ILO or a local keyboard monitor and mouse. Also try restarting the KVM module before powering up the server
Posted on Mar 20, 2010
To install windows server 2003 on HP servers you need Smartstart CD, you can download that cd from hp site:
1. For x32 is this link:
And for x64 version:
Posted on Jul 24, 2010
Tips for a great answer:
Jan 17, 2013 | HP Compaq ProLiant ML310 G4 Server
May 19, 2012 | HP Compaq ProLiant ML350 G4 Server
Apr 07, 2011 | HP Compaq ProLiant DL380 G4 Server
May 06, 2010 | HP ProLiant ML370 G4 Server
Jul 08, 2009 | HP Compaq ProLiant ML370 G3 Server
May 11, 2009 | HP ProLiant ML370 G4 Server
Jan 20, 2009 | HP ProLiant ML370 G5 Server
Dec 26, 2008 | HP Compaq ProLiant ML530 Server
Nov 11, 2007 | Compaq Refurbished PRLNT ML370 G2 POWER...
165 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: