Question about Philips SPC611NC Webcam

1 Answer

Phillips spc11nc I am trying to use this gift with skpe but it keeps failing the sound test... does it not have a mic built in.../ In the past i have used the logitech successfully but it was recently damaged... hence this gift...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Yes, but you have to select it in the Audio Settings in Skype. Here is info to help.
Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to disable Dell latitude E5500 built in mic so you can connect an external mic?


Just plugging in the external mike into the jack should AUTOMATICALLY disconnect the internal mike.

May 27, 2014 | Audio Players & Recorders

2 Answers

People cannot hear me


If your webcam has a built in mic make it the default mic

XP
Control Panel (Classic View)

Plug in your webcam

Open 'Sounds and Audio Devices' folder and click on the Audio tab - make your webcam mic the default device in the 'Sound recording window'
Open 'Volume' below the window to ensure the mic is not muted
Click 'Apply' and 'OK'
Restart your computer

Vista

Plug in the webcam

TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
Right click on the volume graph and select 'Show disabled devices' and 'Show disconnected devices'
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Configure your webcam to the chat program

Aug 22, 2010 | Logitech Webcam

1 Answer

No sound


You may have a laptop with a built in mic or headphones with built in mic and webcam with built in mic
You need to set your webcam mic as default
Vista
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Configure to your chat program

May 23, 2010 | Logitech QuickCam Deluxe for Notebooks

1 Answer

My mircophone is not working on my MSI laptop


Hello Freshnoble, hi! try first the sound recorder program, for testing purposes, if you are using XP, it goes, start, all programs, accessories, entertainment, sound recorder. Shout on the mic, you should see wave pattern on the sound recorder program. if not. the problem can be hardware and/or software. If its the hardware, check the microphone, is the mic built-in or are you using an external mic? if built in, try to enable first the microphone, right click the speaker on the lower right side of windows, select adjust audio properties, sound, at this point you should see the sound recorder device, select mic volume and adjust it all the way. test again the sound recorder. If you did not reach this point, there is some thing wrong with the device driver, load the sound driver first and test the mic again.

Mar 12, 2010 | Computers & Internet

1 Answer

I cant hear anything with my internal mic or with my mic that i plug in for my dell studio 1535. Can someone help me?


I usually check the configuration at Volume control/sound control option(try between mic and line-in, the volume of the mic etc) and then test my mic with the Sound Recorder.

..Never failed me before, so hope it works.

Nov 22, 2009 | Dell Inspiron 6400 Notebook

1 Answer

I try to record a video with my web cam and it has no audio


Hi, first of all you need to make sure you have the microphone configured properly. If using the cams built in mic you need to make sure it works . If using XP Open the control panel and click the sounds and audio deviecs, click the voice tab, there you can select which Mic to use: the USB cam mic or another mic , then click test hardware. If you should see a mic playback test. if the level is there then the mic is working. next see if there is a mic level test/adjustment within the camera software, if using skype you also need to set it up and turn up the Mic level there too. you may need to add a mic, some USB cam built in mic aren't that good. you can buy a cheap mic and plug it into the pink jack.
hope this helps, please leave a 5 thumbs up if this helped
Eric

Aug 17, 2009 | Facebook Social Network

4 Answers

My problem is with a Logitech WebCam with a built-in Microphone. The Mic does NOT work . It works on another LapTop ( with the same Vista ) but not in here ( PC with Vista ) I tried most of the the trouble...


Normal 0 Go to Control Panel and Click on Sounds, Click on Audio, then Click on the Microphone. Then Click on the drop down and select Camera Microphone.
Click OK and it should work.
Hope this helps. Bud

Apr 07, 2009 | Logitech Webcam

1 Answer

I am having a problem with the phillips spc611nc web cam it keeps failing the sound test in skpe does it not have a mic?


Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Jan 10, 2009 | Philips SPC611NC Webcam

Not finding what you are looking for?
Philips SPC611NC Webcam Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Computers & Internet Experts

The Knight
The Knight

Level 3 Expert

72230 Answers

micky dee

Level 3 Expert

2642 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...