Question about Epson Stylus Pro 4880 InkJet Printer
It is a melcojet G2 (rebranded epson 4880) I don't know if the PF Encoder sensor is our problem (don't know where that is) or it appears the motor under the platen table is not wanting to turn. Would like to get a hold of a repair manual that would show a layout of the printer and part description and we can possibly figure it out.
Posted by Anonymous on
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check if your resetter need to date setting first. set date to 1 Jan 2007. Run program. select particular adjusment.menu waste ink counter. Click main pad dan platen counter. check and initialization.Turn off. Turn on again and check it.
Posted on Jun 16, 2009
Ok I think this is the cartridge carrier doing the banging I have had this on 2 or 3 epsons that I oncwe owned. If you clean those rails that the cartridge container slides on the banging should cease. Dont need to oil them just a damp cloth will do it. You can try sewing machine oil later. only a very small drop ( smidgen) on a cloth to wipe both rails.
Please rate our help and keep this site alive
Posted on Aug 16, 2009
maybe your printer is Blocked by software...
Epson, apart from the chips was invented so that when the printer takes a certain amount of printed pages (about 8000 or so, in most models), suddenly stops working, the two buttons start to flash and does not walk more .
This is because the ink that they will bring to the cartridges when cleaning heads, going somewhere. These are the waste ink tanks, this is where you stay, and the printer has a meter that estimates when the tank is full and stops the printer to prevent ink overflow and cause an internal short circuit.
How do I unlock it?
To save money and the hassle of carrying it to better manage service yourself. You download the software company that provides ssc, Static Control Components, on the next page: http://www.ahorraentinta.com.es/ayuda_ssc.htm
On that page in Spanish will help to make your Epson is like new.
PS: If your printer is not supported by this program (such as the Epson C67) you put in google EPSON ADJUSTMENT PROGRAM FOR EPSON C67 and the low of software.
Posted on Apr 06, 2010
Epson programmed their printer to monitor the waste ink counter and
your printer has reached the maximum value allowed, you have to reset
your printer to clear the waste ink counter.
You may read the information regarding "end of life" and "waste ink counter" here: http://www.epson.com/cgi-bin/Store/support/InkPadsForm.jsp
To reset the counter, download re-setter program here, install and follow the instruction in the web site.
Good luck and thank you for using FixYa.
Posted on Jun 13, 2010
Tips for a great answer:
Nov 02, 2014 | Office Equipment & Supplies
Mar 12, 2014 | Epson 4880 Stylus Pro InkJet Printer
Nov 16, 2012 | Epson 4880 Stylus Pro InkJet Printer
Aug 16, 2012 | Epson T6138 Matte Black 4400 4800 4880...
May 23, 2012 | Office Equipment & Supplies
Apr 25, 2012 | Epson Office Equipment & Supplies
Nov 18, 2009 | Canon imageCLASS MF6550 All-In-One Laser...
Mar 05, 2009 | Epson Stylus Pro 9800 InkJet Printer
49 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: