Pixma ip3600....after cleaning and deep cleaning...I still get fine horizontal lines
are you copying? maybe there are scratches on the glass of the scanner.
if printing ... usually means your low on ink or a nozzel is clogged with ink or dust etc... grab like a "deep" tupperware lid shallow side facing the counter, pour some "coffe pot " hot water in it , then take the cartridge (30-31.40-41.50-51-52.) as it sits in the printer , placing the bottom most part into the water ( maybe towards the edge using the side of the lid to prop up the shorter side of the bottom of cartridge as to keep it level and or flat) place the matching peice of tupperware over the bath (like a dutch oven) to keep steam in and leave anywhere from a10 minutes to half hour - hour. you'll know when it is done by folding a napkin and or paper towel keeping it flatten out and dabbing ( or blotting the bottom of the cartridge onto it eith on your hand or flat surface likr the counter ) blott untill you can see "CLEAR !" cyan (blue), Yellow, Magenta(pink) bars IF BARS ARE INCOMPLETE PLACE BACK INTO BATH WITH FRESH HOT WATERAND REPEAT STEPS ( ABOVE). IF BARSARE MISSING ALL TOGETHER NO MATTER HOW MANY BATHS ARE GIVEN YOU WILL NEED TO REFILL OR PURCHASE A REPLACEMENT CARTRIDGE , THIS ONE COLOR IS CLOSE OR IS EMPTY?
May 20, 2011 |
Canon Printers & Copiers