Question about E-Machines (40-A06600-D201) for M2000S Series Motherboard

1 Answer

Ram selection? I have an e machines T2882 tower with an Imperial mother board # gv 20030812. It has a FSB of 400 MHZ. The ram that is working in it now is a 256 MB 333 MHZ DDR. I tried to install a 1 GB 333 MHZ and a 512 MB stick of ram and neither one worked. Does the board have a limit of 256?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,179 Answers

Your motherboard supports max of 2 GB PC 2100 RAM. Hope this helps.

Posted on Jan 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Emachines Imperial GV 20030812 Motherboard manual


THE MOST EASY WAY TO CLEAR CMOS JUST REMOVE CMOS-
BATTERY FOR 10-20 SECONDS.IT LOOK LIKE A WATCH-BATTERY.BE CAREFULE WITH THE HOOKS.

Dec 03, 2013 | E-Machines EMA IMPERIAL GV (845GV) TG3...

1 Answer

Where to find manual for motherboard 143159 imperial Gv 20030812?


Good luck. Used to be you could get a mobo manual from e4allupgraders.

The Imperial board is made by TriGem
Started out as TriGem Sambo, is now TG Sambo

The Imperial models were Imperial G, Imperial GL, Imperial GV, and Imperial GLVE, if memory serves.

TriGem Imperial GV - 143159 -20030812

http://www.ebay.com/itm/gateway-emachine-mother-board-imperial-gv-20030812-/111025938736?pt=Motherboards&hash=item19d9a96130

Bad photo, but it does have the mouse Zoom In feature.

CMOS jumper and Clear BIOS Password jumper, down by the Front Panel header; is the same as used on the TriGem Imperial GLVE -129504,

http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07540&lc=en&cc=us&product=83481

Scroll down to Motherboard Layout (Illustration), and Photo; then down to jumper info.

(By the way.........the BIOS chipset is removable, therefore replaceable)

The front of your computer is the Front Panel.

The area of contact pins on the motherboard, that the Main wires from the Front Panel go to; is the Front Panel header.

This is PANEL in the illustration. Bottom/Right corner. Uses the same Front Panel pinout, as your Imperial GV uses.

8 pins along in a row.
Starting on the LEFT side going towards the Right;
Pins 1, 2, 3, NO pin 4, 5, 6, 7, and 8.

A) Pin 1 is N/C. Not Connected
(May not even be there for all I know)

B) Pins 2 and 3 are for the Power On LED.
Pin 3 is for the Positive wire.
If the PWR LED is dim when the computer is on, switch the wires around.

C) There is NO Pin 4. At least that is what I make, looking at the Front Panel header pinout. Indicate Pin 1 is N/C, and Pin 4 is N/C.

D) Pins 5 and 6 are for the HarDDrive activity LED light.
Pin 5 is for the Positive ( + ) wire.
If the HDD LED is dim when the Harddrive is active, switch the wires around.

E) Pins 7 and 8 are for the Power On switch.

HOWEVER, since the motherboard photo on HP Support, and Ebay; is as clear as mud; suggest you do this,

Connect your Power On switch to Pins 7 and 8;
OR,
touch across them briefly with a small flat tip screwdriver.
(Power plugged in)

See if that is correct for the Power On switch. What will happen if it isn't? Nothing. Pressing the Power On button just won't turn the computer on; is all.

Turned the Power Supply (Computer) on?
Good. We can assume the rest of the pinout is correct also.
Want to make sure? Easy.

Take an LED bulb (Power On, or HDD), and touch it's two wires to the Power On LED pins, in the Front panel header.
Stays on? Yep. Power On LED pins.

Blinks? Whoops.
Those are the Harddrive activity LED pins.
Just that easy to check it. With using an LED, you won't harm anything even if the pinout is wrong.

Moving on.........

Using the HP Support page, for that TriGem Imperial GLVE motherboard, the Motherboard Layout is the same as the Imperial GV.
(So is photo, 'natch)

Referring to the layout, and photo;

A) Power cables:
Two
20-pin ATX main power cable, and 4-pin ATX +12 Volt power cable.

General example of a 20-pin ATX main power cable, and it's respective connector on the motherboard,

http://www.playtool.com/pages/psuconnectors/connectors.html#atxmain20

Note* Color of power cable connector does NOT matter.
Can be Whitish, Yellowish, Black, Sea Foam Blue, or Lactating Mammary Gland Pink. (Made the last two up)

Goes to the motherboard connector immediately above PCI slot 1.
Note the LOCK on the side of the power cable, and corresponding TAB on the motherboard connector.

General example of 4-pin ATX +12 Volt power cable, and connector on motherboard,

http://www.playtool.com/pages/psuconnectors/connectors.html#atx12v4

Power for the Processor
Looking at the motherboard illustration, look at the Northbridge chip; -> Intel 845GL in the middle.

ATX 12V to the left, is where the 4-pin ATX +12 Volt power cable plugs in.
See the aluminum finned Heatsink, sitting on the Northbridge chip?
The whitish/yellowish 4-socket hole square connector, to the Left.

Moving on............

See where it states Primary IDE to the bottom/right in the illustration? Blue IDE connector?
That is where the Harddrive plugs in.

This is a general example of the connector,

http://en.wikipedia.org/wiki/File:PATA-cable.jpg

Note the Locating Lug on the top/middle. This particular style uses two ribs. Some are just a solid block.

The reason I brought it up, is if there is NO Locating Lug on the connector; let me know in a Comment.
I'll tell you how to use the faint Red stripe, on the side of the flat cable; in order to plug it in correctly.

The optical drive (CD/DVD drive) plugs into Secondary IDE.
You can see where a Floppy Drive plugs in.

Above the Processor (CPU) socket to the Right, is where a computer case fan plugs in. PS_FAN.
To the upper Left, is where the Processor fan plugs in.
CPU_FAN

To the left of the ATX Power Connector, (20-pin ATX main power cable; motherboard connector), is the connector for the small audio cable; coming from the optical drive. (CD/DVD drive)

Optical Drive In.

Right next to the round CMOS battery, is the Front Panel USB header.
-> TWO USB ports connect to this header.
(USB)

A 4-pin Peripheral power cable is used for the Harddrive, and Optical Drive.
Misnomered as 'Molex' power cable,

http://www.playtool.com/pages/psuconnectors/connectors.html#peripheral

Note the rounded corners. When plugging the power cable in, these rounded corners always go UP.

[Molex was the first maker of the power cable connector.
The name stuck.
Kind of like calling an adjustable open-end wrench a 'Crescent wrench' ]

The motherboard chipset is an Intel 845GV.
This is what Processors (CPU), and Ram Memory are supported,

http://en.wikipedia.org/wiki/List_of_intel_chipsets#Pentium_4_chipsets

Single-Core processors.
Use a Socket 478 processor socket.
Intel Pentium 4, Celeron, or Celeron D.
(Celeron D is NOT a dual core processor)

400 to 533MegaHertz Front Side Bus processor support.
(400/533MHz FSB)

DDR Sdram ram memory that is either 266MegaHertz, or 333MHz.
(PC2100 and PC2700, respectively)

2GB's of it.
1GB for EACH ram memory slot.

For additional questions please post in a Comment.

Regards,
joecoolvette

Mar 08, 2013 | eMachines Mb, 143159 Imperial_gv 20030812...

1 Answer

I have intel 915 GLV mother board and 256mb ram, now i want to upgrade my ram to 1GB. please let me knw what kind of RAM i need to buy along with its image details.


Intel Desktop Board D915GLVG - motherboard - micro ATX - LGA775 Socket
Max Supported Memory 4 GB Supported RAM Technology DDR SDRAM Supported RAM Speed 400 MHz, 333 MHz Supported RAM (Registered or Buffered) Unbuffered RAM Features Dual channel memory architecture

Max Supported Memory 4 GB Supported RAM Technology DDR SDRAM Supported RAM Speed 400 MHz, 333 MHz Supported RAM (Registered or Buffered) Unbuffered RAM Features Dual channel memory architecture

Aug 10, 2011 | Intel D915GLVG Motherboard

1 Answer

Can I upgrade my CPU to an Intel Core 2 duo 1.7


You are basically limited to what was optional on the model. So you can only upgrade to one of the following cpus:

Intel Pentium M 745 (1.8-GHz) with 400-MHz front
side bus (FSB)
Intel Pentium M 735 (1.7-GHz) with 400-MHz FSB
Intel Pentium M 725 (1.6-GHz) with 400-MHz FSB
Intel Pentium M 710 TJ85 (1.4-GHz) with 400-MHz FSB;
operates at a lower temperature than other processors
Intel Celeron M 340 (1.5-GHz) with 400-MHz FSB
Intel Celeron M 330 (1.4-GHz) with 400-MHz FSB

And you are limted to 2gb of ram max on this model.

Apr 12, 2010 | HP Pavilion dv1000 Notebook

3 Answers

Is it possible to upgrade to a faster processor on a hpn pavallion dv1000


here is a list of processors supported on that machine

Intel Pentium M 745 (1.8-GHz) with 400-MHz front
side bus (FSB)

Intel Pentium M 735 (1.7-GHz) with 400-MHz FSB

Intel Pentium M 725 (1.6-GHz) with 400-MHz FSB

Intel Pentium M 710 TJ85 (1.4-GHz) with 400-MHz FSB;
operates at a lower temperature than other processors

Intel Celeron M 340 (1.5-GHz) with 400-MHz FSB

Intel Celeron M 330 (1.4-GHz) with 400-MHz FSB

Mar 15, 2010 | HP Pavilion dv1000 Notebook

3 Answers

Can intel d102 motherboard have 667 fsb ram


I am not able to find a 533 MHz 1GB DDR2 RAM.. Has anyone used a 667MHz 1GB DDR2 on this board D102GGC2 ?

Dec 25, 2009 | Intel D102GGC2 Motherboard

1 Answer

Need jumper pin config settings for imperial gv 2003 i need to know what j-5 is for mostly


This MB is very similar to Intel 845 boards. The info is similar & if you had mentioned which jumper's, then maybe.. otherwise this is the specs of imperial:
143159 Imperial GV 20030812
Mat,no:143XXX IMPERIAL-GV200XXXXX E-Machines Socket 478 Processor Socket Type: mPGA478 Memory Type: Unbuffered DDR Synchronous DRAM (DDR SDRAM) Memory Speed: PC2100/PC1600 Memory Sockets: Two 184-pin 2.5 V DIMM sockets Maximum Memory: 2 GB 256Mbit Memory Support: Yes Front Side Bus: 400MHz Intel: Extreme Graphics (845) AGP Manufacturer: Intel Bus: AGP Chipset: Intel 845 Video RAM Type: Uses system memory Onboard Audio Configuration: Intel ICH AC 97 CODEC AC'97 Codec Device: AD1886 Audio Jacks: M, LI, LO, (Header) SO Speaker CD-In Connector: 1 Internal Spkr-Out/Line-Out/Headphone-Out/Mic-In Header: Yes Onboard LAN Onboard 10/100Mbps Ethernet LAN Supplier: Realtek RTL8100(B) Ethernet Configuration: Down(PCI) Wake-on-LAN, Wake-on-Ring: via PME#(PCI) .....................sodeep

Sep 13, 2009 | E-Machines Computers & Internet

1 Answer

Short but rapid beep code when powering up emachine


The beep code most likely is either video card or memory.
If you have a video card or can borrow one that you know it works try it first, if that doesn't resolve your issue try the memory.
You can take the memory out and have it tested to see if it is defective.
Go to this site and get the Beep Codes, http://www.computerhope.com/beep.htm
I hope this helps.
Good Luck.

Feb 26, 2009 | E-Machines eMachines Desktop PC

1 Answer

Ram


This are the supported MHZ of your RAM 400 MHz • 333 MHz • 266 MHz, but I suggest you go buy the
400MHZ since that is much higher and it will perform much better with your motherboard and can provide
you a faster speed....

Don't forget to rate the solution FIXYA thank you...............

Nov 07, 2008 | Mercury P4VM800M7 Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...