Question about Craftsman Scroll Saw
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Here ya go...
If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c
Posted on Sep 22, 2009
Your scroll saw should have come with Hex end tools to use when changing out the blade. You must release the tension on the blade (located on top of arm above blade). There is a small allen head screw which has to be loosened with an allen wrench to release the blade. There is also an allen head screw under the working surface which will have to be loosened to remove blade at the bottom. Replace blade at the bottom 1st, tighten up then go to the top, tighten it, then reset the tension and you're ready to saw again. Make sure to get a visual on the directions of the blade teeth before you remove it so you can replace the new one the same way. I hope this is helpful.
Posted on Sep 29, 2009
Testimonial: "thank you we'll give her a go."
Tips for a great answer:
Nov 30, 2010 | Craftsman 16" Variable Speed Scroll Saw
Oct 31, 2010 | Craftsman 16" Variable Speed Scroll Saw
Aug 23, 2010 | Garden
Sep 26, 2009 | Craftsman Saws
Sep 19, 2009 | Saws
Sep 12, 2009 | Craftsman 16" Variable Speed Scroll Saw
May 21, 2009 | Craftsman 16" Variable Speed Scroll Saw
Apr 02, 2009 | Craftsman Saws
90 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: